Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (197)

Sign In or Sign Up now to post a comment!
  • About four years later. Is there generator attached? How many hours its had been rotated and how much energy it had been produced? I hope that cosmetic modifications had been made (like noise reduction).

  • SADDLEHORN1A1: just let it go man :I

  • @andrewaremu1991 Lmao. I let go of this particular style of device years ago. The only way to make a self powered gravity operated device work is to completely remove the drive weight from the equation after the power stroke, then have that same weight ready for the next power stroke, which as it turns out, is actually a rediculously simple concept after all...........and it only took me 15 years of failures to do it.

  • Comment removed

  • Comment removed

  • Frankly, I don't see enough HP {again T x RPM /5252} being produced to run a generator/hydraulic pump with your overdriven ratios and short stroke length. In the video, you might have a 100lb @ 1ft stroke, and maybe 30 rpm {and I'm being generous} that's 1/2 horsepower {.57} at the shaft, before the ratio loss. If you can explain, I won't call bullshyt. Yet.

  • What about RPM versus stroke length in feet per second? The higher the RPM, the faster the weights must be reset to the "power" stroke. Since the torque produced is a direct result of the distance of the weight to the shaft center, what about losses due to acceleration forces required by the weights' longer stroke? HP is TORQUE X RPM/5252 , and I notice the stroke is very short in the video. Also have to question the gear ratio for the generator, another major loss of torque. NEXT

  • The weights' added "weight" will be 90 degrees to the shaft. Is he saying the retracted weight's centrifugal force offsets the extended weight's centrifugal force by enough to overcome hydraulic pumping losses, when the extended weight's force is stored in an accumulator, that being a self- compressed air cylinder? In other words, the accumulator balances the centrifugal force, and reduces the hydraulic pressure needed to drive the weights back overcenter, correct? NEXT

  • So Bob is saying the generator is putting out more juice than is needed to drive the hydraulic pump? Principals of leverage, centrifugal and inertia? Let's take centrifugal then. The distance of the weight from shaft center to end of the beam is where the torque, in lb/ft, is generated. Once the weights are over centered, centrifugal force will obviously increase the further the weights are from center, requiring more force to drive them back over center. NEXT

  • cool!

  • The fuel source is evident and this should be taught in school under mechanical principles of leverage, centrifugal, inertia. Build it and see.

  • People should think about how this machine opperates before leaving negative comments. Really simple and they can be made purely mechanical but don't expect to buy one at a local dealer near you. lol. If you want you have to build it yourself. This type machine does work. If you want to build something like this just go for it and don't let someone tell you your wasting your time trying cause it violates the laws of thermodinamics or whatever. IT doesn't apply to this machine.

  • Hi! could be nice, but the demonstration is tow short to have any idea that is a self running machine that really sustain itself indefinitely. I mind why you didn't made longer :/

  • good job. I come up with something different. I will build the prototype and test it to see it will work as it is intended

  • @cwjmem glad to see some people are interested in this type machine. stick with it.

  • air,water to transfer motion god idea

  • Comment removed

  • WOW JUST AMAZING.!! help me build one.??.call me Tee 661 326 1604

  • @bakersfieldmusicnow his patent is called energy converter and can be found free online or email me at rblackwell2771@yahoo.com

  • Мужик молодец, все очень просто и гениально, кто не догадался как это работает, идите учить уроки! Я понял сразу посмотрев всего один раз!)))

  • A person can build this type machine purely mechanical using counterweights and levers. Just keep in mind the center of balance. Using the rams is like supercharging a v-8. Making the machine for controllable with a added gain in performance. Gravity will be here long after were gone. lol. this machine runs itself but for who it concerns people don't want to show every detail but they are easy to build. Good luck

  • anyway we cant see energy

  • @youngboon1 You can't see the energy that is turning that thing around & around? Do you need glasses? You might need some thick ones. :P

  • the intro to this music sound like gamma's theme

  • That's awesome. All the haters need to remember as long as the juice is worth the squeeze you're money in the bank.

  • Coolest and biggest machine on Youtbe to produce free energy! ;-)

    But I think I know how it works. I can't describe it exactly, my technical English is not that good. But it has air pressure in the blue tank on the right side and this lets a weight go up and down in the machine. So it really is a gravity machine but it does not produce free energy. It needs air pressure from "outside" even if it produces a little amount of air pressure itself.

  • @traktorensteff they can be built purely mechanical. Just stick with it if you choose to do so. Take care

  • What the fuck is this thing ???????????

  • you is crazy.hohohohohoh

  • thermodynamics is a conspiracy by the oil companies to cover up free energy. and vikings came from the moon.

  • Looks like a Star War requisite.

  • Congrats! You made a machine that translates vertical force into Rotational force! Not exactly a new development.

    Send me a vid of it running for, say, a month straight without an external power source, and then I'll believe it.

  • these can be made purely mechanical. this design has to be the easiest to follow but a person has to build it themselves. It works!

  • all the energy is from gravity. these work!!!

  • Energy cannot be generated.

  • How is this a free energy gravity wheel machine if you have to use hydraulics to move the weights? More energy would be required to move the weights than what could be produced.

    FAIL!

  • why is this thing not out on the market as an energy generator?

  • @gicm89 - ...umm, perhaps because it isn't a free energy generator (they don't exist).

  • Oh yea, I cou.ted atleast 46 grammatical errors in me last post..im working on 100.

  • Holy srhit man, the 2 arguing about whos smarter,or right, or have a better Mc-edjewkshun need to argu through the message service yotube has provided it users. Reading the comments made my iq go down! Pfff time to wrap another rodin coil..

  • behind blue cover is hamster running in his wheel

  • if you look behind the tarp you can see thousands of hamster wheels

  • think of using front wheel drive components for the center shaft.

  • What energy was expended and what was recovered?

  • It's an interesting machine, but I wouln't like to be standing next to it when something decides to let rip!

  • this is probally the easiest way to go if you want to get off the grid as far as the electric company goes. what if something happens in the economy. Will you be ready?

  • It stopped. Also, it's not free energy when you're pumping electricity/pressurized air/whatever the hell else into the system.

    Lastly... can you just imagine if these two buffoons did create a conservation of energy violating device? A real such device would essentially be a wildly spiraling out of control bomb. In this case, it would last until the device was spinning fast enough to break off those struts and tear through the community like shrapnel. Actually, it could do that anyway. :P

  • that was fantastic job

    sorry about the bad comments from the bad users

    they don't understand

  • @TheGoodInventor they just need to open their minds a little.

  • @rblackwell2771 - you do realise that no one has ever built a free energy machine? Having an open mind about such devices is akin to an empty head.

  • @LiamXaoh according to you and no one can prove you otherwise. You are intitled to your opinions of course.

  • @LiamXaoh and everyone said we would never travel faster than sound, and i know how to travel faster than light!

  • Comment removed

  • @LiamXaoh u would know what ppl were sayin 100 years ago,all scientists of great achievements believed in unknowns,u another youtube arguer claimin 2b a scientist,why arent u too busy not to use youtube then.u aint a scientist,u cant even form sentences properly.may be youre one of them science workers workin on crap so spend time in youtube claimin to be a scientist &knowin it all.rupert sheldrake is a professor of biology who has publicised his telepathic finds, spose u gonna correct him too

  • @magnusalexa - "..u another youtube arguer claimin 2b.." and you accuse me of not being able to form a sentence. You read like a moron. I counted at least 30 grammatical errors in your drivel. English isn't my first language which doesn't invalidate my opinion. I suggest you go back to school as the five years you spent in grade 4 were wasted. You claim I'm an arguer then you propose an off topic suggestion (i.e. telepathy) to start an argument. You are a joke at best.

  • @LiamXaoh im only partially educated but yet im the first person to explain a plausible way of how to travel faster than light, have put them details in my website. go one then give us youre attempt to enlighten us all and tell us how i am wrong and you are right. science doesnt know it all, it is an infant profession/field changing its beliefs, ways, processes and knowledge every month. if science knew it all there woould never be another scientific discovery ever

  • @magnusalexa - "partially educated and the first person to explain a plausible way how to travel faster than light" - if you could only grasp how that comes across. Unless you fully understand physics and are qualified to comment any opinion regarding faster than light speed travel is just a series inane thoughts. The incoherent ramblings on your website are a sight to behold. But as you have telepathic powers you'd know I thought that already. LOL

  • @LiamXaoh only partially educated wasnt any fault of my own, and when atomic physicists work out how to generate atoms which in turn create solid matter then they are on their way to creating faster than light propulsion systems. my IQ is far superior to youre own, id rather be only partially educated with a high IQ like how i am than to be educated over my intelligence levels like how you are.

  • @magnusalexa christopher columbus observed &wrote in his journals of strange lights that rose out of the sea &disappeared into cloud cover,in the region of the bermuda triangle,but all he is known for is discoverin america which isnt true,the russians were in north america long before him, &the vikings &even an irish discoverer was in america long before him.what is accepted &known about isnt always true, &there are many things which are ignored &not believed in which are true.

  • @magnusalexa - based on your appalling use of English, your belief in unsupported drivel and the inability to form any sort of coherent argument I'd rate your IQ as on par with the rest of the deluded individuals who waffle on with their ideas and conspiracy theories here on YT. Tell us about perpetual motion machines you have designed while you're at it. Go back to taking your meds and try doing water colours for therapy. Stay away from sharp objects too.

  • @LiamXaoh rupert sheldrake is a professor of biology who has publicised his telepathic finds, but you only make humour of these scientific facts cause you cant think out of the accepted.

  • @magnusalexa - can you get an adult to post your comments? I'm not interested in telepathy. You seemed obsessed with it. Read my mind and you might get the hint.

  • What's behind the tarp dude? Hahaha! These fucking people are unreal.

  • i cant tell what its doing the turning thing some power cords on the right of the screen

    looks like its trying to run away from these stupid monkeys lol

    i can tell its saying again and again WHY DID U CREATE ME IM IN SO MUCH PAIN,, kill me... kill me ... this thing looks fu*ken scary man bah ha ha ha

  • Does it have ANY use at all ?

  • Prepare to fire the Ion cannon!

  • very fine!

    but no round.

  • well, it didn't blow up at the end. I'm dissapointed!

  • for real entertainment pause at 0:00 go to full screan and hold left arrow then press up arrow to play snake

  • How long before that thing wobbles/shakes itself to pieces.

  • Pay no attention to the man behind the curtain.

  • there is no free energy

  • @berathan90 yes there is. just build it. refer to his patent called energy converter. If you can't understand how this works i am sorry.

  • I think Bob must have missed the parts of Physics 101 that discussed the Laws of Thermodynamics and the Conservation of Energy.

    If this thing were even remotely possible, the power companies would be using these things and building farms of them to produce power for nearly nothing and sell us the energy at exorbitant rates generating unreal profits.

    Shit in one hand and collect the profits from this thing in the other, and see which one fills up faster.

    Take a wild guess which one wins...

  • Deluded. 'free' energy driven by compressed air...

  • @askempasa it creates more than enough power. i new how these things work before i was a teenager. just build it, stick with it, and you will see. when you build it, don't share to much online.lol

  • Comment removed

  • it free for all the money he put in to iti bet he only gets 3 watts every day

  • @dizazter5464 try 10,000 watts or more depending on how you build it.

  • good job

  • I think I will stick with solar panels and windmills.

  • Comment removed

  • @rblackwell2771 I guess what I'm asking is can u unplug your compressor, plug it into the generator and It will run on its OWN? Cause you've got an air hose running your machine or at least till some parts fail. tell me the truth. Does It? I want to see in person what youve done, cause Its hard to tell on your vid

  • Comment removed

  • Comment removed

  • @tennesseejed1969 they work well just refer to his patent. very simple principle on this type machine. no magic.

  • @rblackwell2771 then I wish you success, and I hope your invention does well And I hope it helps out with the energy crisis.

  • @tennesseejed1969 yep but i doubt they will show up on the market. Under the table is the only way i believe.

  • Looks frigin dangerous.

  • Its amazing the effort people put into building these "overunity" or "free energy" devices without thinking them through or reading about physics. Perpetual motion isn't possible.

  • Comment removed

  • @rblackwell2771 look- I know that it seems possible and we so want to believe. Have you seen DaVinci's wheel? that is as close as Ive seen to a Gravity Perpetual machine, but It just won't work cause It takes equal energy to take the bearings "up" as the energy earned by gravity to bring them "down". Energy cant be gained when it is constantly bieng canceled out.

  • Comment removed

  • Comment removed

  • @tennesseejed1969 the definition needs to be changed.

  • That welding is definately not asme spec!

  • Probably the next Josef Fritzl =/

  • btw....who welded that monster? :))

  • . . . and quite predictably it ground to a halt. But top marks for recycling - I can see this was largely constructed from the off-cuts bin. And at least it gave you some well needed welding practice.

  • it uses compressed air you need a compressor to create the air pressure which is driven by an electric motor so there for it's not free energy

  • Comment removed

  • @dbell4308 you don't even have to use the air compressor on these type machines. it can be purely mechanical

  • Comment removed

  • what's behind the tarp

  • what's behind the trap

  • nice weld..

  • Giant retro-punk shit))))

  • Finally, the universe unraveled.

  • I now the system. This dont work.

  • Someone should buy up all these machines that are lovingly built and show them in an Art Gallery.

    All the experiments that have gone wrong or are no hopers like this one.

    This machine is a work of art. There is as much thought gone into making this contraption as Michaelangelos "David." or that feller that built "The Angel of the North" or even "The Statue of Liberty."

    They are so well made. I take my hat off to you and I mean that sincerely,

    I'm not taking the Mick out of them.

  • @52memor There was a point in the 19th century where the US Patent Office placed a requirement on inventors submitting perpetual motion machines for patents where they had to submit a working model that had been running for a certain amount of time. I would LOVE to see a gallery of those models.

  • Poor sod

  • it lookes like a SAW MACHINE! *lol*

  • I'd like to see that thing let loose......and go through the wall. hahaha The cool thing is....it's the world's heaviest paint stirrer. hahaha When you're done with it....you should sell it to the next Batman production or ship it to Cancun....so drunk kids can get strapped to it.....and take a ride...while on Spring break..

  • Behold: I have built a magnificently large piece of shit!

  • @scabbybuttcrack No description. no explanation. stupid music and photography. What a sorry excuse for an overunity effort.

  • @scabbybuttcrack at least is something besides putting stupid comments on youtube asshole

  • @scabbybuttcrack LOLOLOL!!!

  • @scabbybuttcrack do you have a video to prove it?

    I only ask because I believe you've never built anything in your life.

    Otherwise, You'd appreciate ALL intentions!

  • @a2zhandi Why are you giving me shit? I haven't been involved in this fight for months. Go suck a dick!

  • @scabbybuttcrack Well....... I just thought if you somehow forgot you were a dik, I'd remind you ;-D

  • Comment removed

  • @rblackwell2771 LOL. Failed Physics 101 did we?

  • @LiamXaoh

    Yes he did... Fail Physics that is.

    This is nothing more than a crude steam engine type device. In the long run this will not work. It may do a few revolutions for the camera and initial measurements of power output vs. power input may look promising but just wait until those rams start heating up. Hot air doesn't compress as well as cold air does. And by the looks of it, the builder, Bob, knows a lot about things that full of hot air.

    Both he and this device are full of it!

  • @DrGoodwrench64 you don't have to use air. it can be done a lot simpler.

  • @LiamXaoh if i took it, i would never have built it. i know this type machine works since i was a little kid.

  • @rblackwell2771 -sure...and I'm the magic fairy.

  • @LiamXaoh good for you

  • Comment removed

  • Holy shit, that thing is a fricking death trap!

  • who takes the credit for all the snotty welding?

  • Before you solve the energy crisis, learn to weld.

  • @dogdove they are not tring to invent welding. they could let you do that.

  • I see you've built the sporty compact model!

  • this vid is FUCKED lol. gravity wheel my ass

  • Umm :L some people in this forum are actually debating weather the conservation of energy law actually applies in this universe, you can't get something from nothing! this is basic! you'd have to mad to dispute this...

  • @sloosh6000 getting something out of nothing is different to getting finite something out of infinite something. get it? Nothing=infinite something. could be. try proving this wrong lol

  • @ActiveStorage What do you mean? He is using a hydraulic pump to move the rams in and out. More energy to move the weights then he is producing. Nothing special here.

  • @valveman12 i know its a fraud. i didnt write that it's not. in fact i dint write anything about this particular lol-machine. just looking at the way it jerks and shakes makes me laugh lol.

    ps

    i'll re-phrase myself. No living human being actually KNOWS (aka FOR SURE through solid experimentation) what is nothing. Noone knows what is absolute void. Noone knows what lies beyond 0 K. Noone knows what pushes particles apart and together. Noone knows what mass and what spin is.

  • @ActiveStorage My Bad

  • @sloosh6000 Let's say you've got a magnet that can slide up and down. Fixed underneath it you've got another magnet. Both have south poles pointing at each other, so they repel. The force of gravity is continually pulling the top magnet down. If it weren't then it would fly upwards from the magnetic repulsion. The force of magnetism is continually pushing the top magnet upwards. If it weren't then gravity would pull it down. Where are these two continual sources of energy coming from?

  • @sloosh6000 Now let's replace the two magnets with a rocket. The rocket converts chemical energy into kinetic energy to continually push the rocket upwards, so it stays balanced in the same place like the top magnet in the previous example. If it didn't then the force of gravity would pull it down. You've got to continually produce energy from burning the fuel, until the energy source runs out.

  • Hasn't anybody thought that if you have a very low amount of friction and "ALMOST!" completely compensating amount of acceleration you can start it a certain speed and keep it at that speed for quite a while. I'm not sure as I am not a professional at these things, but I was just thinking, if that is possible somebody should try it!

  • I cannot belive how ppl with PHD's deny free energy. Somebody learnd them that isnt such thing, and they base all their knowledge to this statement. Also smartest ppl in the world cant explain energy, and some brainwashed state that they understand every aspect of it. None of theese PHD scientist are not even close to tesla state of mind and they state he was mad/wrong?

    If you free your mind from something you think you know, maybe you have a chance.

  • @195375id actually, some of th smartest people CAN explain energy. Even some of the dumbest. Force = M*A

    thats mass times accelleration. THere is potential and kenetic energy (basics). You may have heard of a man named Sir Issac Newton. And no, I don't think many people these days would say Nikola Tesla was amad man. He was in fact a genius. Alas his financial hardships coupled with the bad timing of WW2 effectively put a stop to much of his work.

  • What a shame that so much time and effort can be invested attempting to build an impossible machine. But even DaVinci conceived of similar 'gravity wheels', so it's not a matter of intelligence,.. just a matter of knowledge and education. The gravitational field is a field of force. There is no energy in the field other than the energy you initially invest. It takes just as much energy to lift the weights as you get back when they fall. In real life, some energy is always lost to friction.

  • I get suspicious when there is a big blue curtain in the area. What's behind there, a battery, tank of compressed air, or something else?

  • Not only did you waste your time building that you wasted my time watching it...and your welding skills are poor at best.

  • Thats a beast Bob and I 'm trying to imagine it in a ufo powering a craft across the universe. Looks like an out of control washing machine that has morphed itself after ingesting uranium 238 or plutonium 235. In a word Bob, wtf. were you thinking!

  • Overunity is simply not possible, Physicists with more PhD's than you have useless machines have studied the problem from every angle you can imagine and many more you can't, it is simply not possible.

  • there is no such thing as "free energy" for this machine to generate power it must do much rpm I dont believe that people still try to find free energy.just use sources with much energy to be transformed like rivers air or sun this think can't light a led

  • @andreasss007 nether can your ass but you still seem to be around.

  • @oranges0the0fox huh huh ^ 

  • Is it steam powered? Looks fantastically dangerous.

  • Why did it stop?

  • Guys you d better be faster at your invention because I m closing up with mine )

  • Looks like a gun. Gave me idea though. If you ever want to smuggle weapons that look like this, just tell the guy at the TSA booth " na man, its a free energy devise!"

  • nice artistic sculpture, but no free energy.

    looks clumsy and gives no explanation about how it should work.

    ways to many air power connectors and micro switches.

    a nice art work. market value around 800 bucks.

  • Tell Bob he needs to study a bit before uploadoing something where you can get FLAMED!

  • All you have to do now it work on making it more, reliable

  • magnetics have potential energy stored. that's how you get more output w/o "creating energy" like all the facist commies working for the US government keep trying to argue. they're idiots and thieves.

  • @Ochn77 are you saying that if you hooked up 5 of these things to the electrical grid, the energy companies would start sending you checks?

  • all the people saying 'free energy idiots' are faggot ass, facist commies working for the US government doing everything they can to make sure they still get the fucking taxes they don't represent us for.

  • @Ochn77 You know, I feel sorry for you guys. This is stuff I tried to do when I was like 5 years old, when I had an interest in mechanics and science, but no knowledge of it.

    I guess it doesn't harm anybody. Believe what you like and it would be really nice if somebody, you did break the 1st law of thermodynamics. Besides, I hated thermodynamics class.

  • it starts to turn, and of course, it slows down it self. the potential energy of the moving thing inside the wheel runs the device for few cycles. until all of its energy is taken by friction or the generators magnetical force, it turns. you get the energy which you've used to lift the heavy core up, you even get less, not all of it. free energy is such a bullshit in every ways. people take a video of their homemade motor running with current, and then saying this is free energy. bullshit

  • Comment removed

  • А я уж подумал щас увидим древнюю Москву.