my question is how did you modifiy the servo tester to accept the hall switch twist throttle(ching chong version)? Does the potensiometer in the servo tester have hall desing or just resistive?
The no load amp draw is about right with the motor no load current, windage and chain drive losses. I wouldn't want to loose the freewheeling capability cause it saves alot of power going down hills as the motor has heaps of cogging. Plus if you run out of juice you can just kick it like a normal scooter. Ive blown the motor since then and have upgraded to a larger scooter and a larger Turnigy 80-100 motor. I will post a vid soon.
The no-load amp draw is rather high for such a small wheel, is it running near it's most efficient operating RPM's? You can increase the gear ratio by using the 90T currie rear sprocket, get it up to 8.2:1 instead of the 7.28:1 you have now, yeah you'll loose the freewheeling capability but the amp draw should be reduced.
check out my scooter. i have since changed the esc but still the same motor and the same gears. my son rides it and he weighs about 125lb.
poweruser69 1 month ago
my question is how did you modifiy the servo tester to accept the hall switch twist throttle(ching chong version)? Does the potensiometer in the servo tester have hall desing or just resistive?
poweruser69 1 month ago
hey man how did u get that sprocket onto that motor ?
rapidotorpedo 5 months ago
The no load amp draw is about right with the motor no load current, windage and chain drive losses. I wouldn't want to loose the freewheeling capability cause it saves alot of power going down hills as the motor has heaps of cogging. Plus if you run out of juice you can just kick it like a normal scooter. Ive blown the motor since then and have upgraded to a larger scooter and a larger Turnigy 80-100 motor. I will post a vid soon.
amr47p 9 months ago
The no-load amp draw is rather high for such a small wheel, is it running near it's most efficient operating RPM's? You can increase the gear ratio by using the 90T currie rear sprocket, get it up to 8.2:1 instead of the 7.28:1 you have now, yeah you'll loose the freewheeling capability but the amp draw should be reduced.
MaxSachs 9 months ago