Introducing the Joe Miracle Cell - 28 6 Inch Plates (Dry Cell)

[bertulforc1]

Test your Favorite HHO machine if effective or NOT. Park the car, start engine to normal temperature, run to 1500 rpm and hold it there by using tools or wedges. Turn ON your HHO machine. Check the RPM goes up to 1600 or more, it is GOOD. If RPM goes down or the same, your HHO machine is ineffective, useless, and waste of time, effort and money. Any seller will pass this test, BUY their HHO machine. (Forget the driving around wasting more gas, or read On Board Computer Instant MPG).

[cenedywong]

Good, I like that you share this video, I wish success always I'll upload another video when we get it running or sometime after assembly after we clean it.

[melisantika]

Nice Video That You Share , So Very Nice Thanks You including Mark Akkerman and Zero Fossil Fuels on YT. I'll upload another video when we get it running or sometime after assembly after we clean it.

[Onepissite]

I Really Like The Video From Your Birth of the Joe Miracle Cell! Joe Miracle demonstrates the water fuel cell I financed and which he built and assembled using ideas from multiple sources including

[pemburuiklan]

Your Video Is Very Useful Sharing I'll upload another video when we get it running or sometime after assembly after we clean it.

[Begbucks]

Nice setup!

[steffyweffy777]

where can I buy one or get this kit to put in my truck ?

[LiteSpeedRC]

That guy acts like hes either drunk or highly medicated.

[Mr420Panda]

@LiteSpeedRC lol i know no "I just put this while I was high on LSD no biggie." lol

[Mr420Panda]

@Mr420Panda *together

[gabrieltgh]

What are the neutral plates for?

[MrJohnny245]

@gabrieltgh you get too much amperage with out the neutral plates . they assist in giving a stable currant draw .

[novachevyguy]

@gabrieltgh to keep you from touching yourself at night.

[fuelban]

Can I ask you, the 4 cells, are they in line ? electrically speaking, !, thanks good video guys.

Thom in Scotland.

[crazyrebel2u]

you said in your video your wires that current runs thru- are out od the water in case there are no sparks. What happens if i build something like this to run in my dune buggy i'll have water splashing all over so what will i get BOOM??

Hehehe

[fuelban]

@crazyrebel2u sparks happen with loose leads, worn connections, bolt all connections with S/S, nuts / bolts / washers / you will be fine, use no crocodile clips or copper inside your unit guy, you will be OK.

Thom in Scotland.

[Olwmatt]

boring!!!



[h2oplasmaplug]

the 316L is much better then 304. its really the type of water you use stainless does have iron in it but the way that it is made with high heat makes it a unique steel. so when you have tap or well water even distilled water it containes iron deposits in it which can attach to the plates which then can cause rust on the plates. if you go to a place and have it passivated it will protect it from rust because you will have a thick chromium layer on it.

[Me102288]

thats not a joe cell, thats a DRY CELL, joe cells are done with pipes... looks like you put 3 drycells together, hehe still, more hho is good

[abobjenkins]

Oh, I don't know, but Joe seems a bit slow. Are you sure HE built that thing???

[Me102288]

@abobjenkins does look like he's put a few dry cells together doesnt it.. regardless I bought a 11 plate cell thay looks almost identicle, they are very easy to make. after I bought mine I realized it just 2 pieces of plexigall 11 4 inch sqaure plates, 4 bolts, 2 1/4 inch hose barbs and a few little gaskets.. LOL the 316L stainless is the most expensive part, and drilling the holes takes the longest outta the whole project.

and a joe cell uses pipe electrodes, this is called a dry cell

[antg1968]

what are the metal plates made of?

[Me102288]

@antg1968 hopefully 316L grade stainless, it doesnt get eaten by electrolysis nearly as much as 304 or lower grade stainless

[vox1philippines]

nice set up !!! 

[dbeeching84]

I can't wait to see the final product

[bluestix]

Why is this called a Joe Cell?

It looks like a standard electrolysis unit to me.

Which is in no way similar to an actual Joe Cell.

[ashtweth]

Technically A fuel cell converts the source fuel into an electrical current. This is an electrolyzer producing hydroxy gas. well done.

[mattimber]

@ashtweth Yes, technically you're right in the naming of this, however I am using the terminology of Stanley Meyer and his patents (WFC). This dry cell will include a PWM and bifilar electron extraction circuit, providing electrical current from induction srouding the copper tubing with coil segments in series, in a copper coil before the flashback arrestor.