Chris Haffey | Remz 08-3 | Custom Setup

[GunsThenTheRoses]

Once your make it V-cut can you change it?

[pkscarr]

@GunsThenTheRoses once youve cut the cuff down you would have to get a new one or use a razors cuff to go back to flat cut, the liner can swap back to flat easily enough though just by putting the padding back

[863aggressiveskate]

anybody know any online skate shops that has these? i cant find them anywhere. size 11

[flameking01]

Chris haffey should send me a pair :D

[oBurdyy]

What

Would

Haffey

Do?

[speckdelamsk]

Does every remz skate comes with strap or only haffeys?

[pkscarr]

@speckdelamsk all the skinned ones do, team models come with the buckle on the outer cuff and strap on the inner cuff (though these can be swapped in minutes) whereas the Haffey pro skates come with the straps already on the outer cuff (as he skates them) and a pair of buckles in the box as well for those who prefer a more rigid lock instead

[thetgskater]

@speckdelamsk those arent his pro skate model, those are just a regular pair of remz skates, but yes they all come with the strap and buckle

[MisterHazza]

Does he skate anti, freestyle or flat?

[Fullents]

@MisterHazza anti rocker setup

[MisterHazza]

I love how he says "Put some money in my pocket"

[CarcinogenicRaccoon]

featherlite 2 frames craaaack. and these skates go floppy pretty fast

[AppleSauceSk8er]

lol i like how he say after a vid go buy some and put some money in my pocket after 2 vids

[neandon]

What shoe size is Haffey?

[nycolebas]

@chrismhay04 yeah, they're the best remedyz skates... but I don't skate remz, I actually skate razors GT, but tryed the new remz.... really awesome :D

[GlLITClH]

do you cut alone the plastic on the back to v cut it ?where it looks like its made to be v cut?

[pikeflyfisherman]

@GlLITClH yes and take off the extra part attached to the liner :)

[MegaRollerblade]

2nd time he said put money in my pocket

[0692gustavo]

If its ur favrt its mine too

[arizonakilla480]

what kind of bearings did he say?

[buah098]

@arizonakilla480 them bearings

[Kag775]

@arizonakilla480 Themgoods swiss percission bearings

[arizonakilla480]

@Kag775 ight thx

[chrismhay04]

@arizonakilla480

its swiss peRcision bearings :))

[3prada]

i have theRemz 08-Three Skate i love them and i did what u said and they look awesome

[nycolebas]

hey, definetly get the hr 1.1!! they're a loooooot more comfortable, have a lot more support, and will keep firm after some months of skating, unlike the older remz :D

haffey 2.0 and HR 1.1 are the best remz ever...

oh, and the shock absorption of both is awesome comparing to the older remz too.

[chrismhay04]

@nycolebas

i totaLLy aggree,

i Have the samE skate,

The Remz HR-1.1

FeeLs Like fLyin thOu haha :))

[TheodorReumert]

v-cut but with buckle thats the best :)

[BrendenSteven131415]

they should make "Chris Haffey pro skater 1" video game!

[TheAsianSensationFTW]

these or the remz hr 1.1s???

[Aggresivesk8er3]

@TheAsianSensationFTW There the remz 08-3 skates. The hr 1.1's just came out.

[TheAsianSensationFTW]

@Aggresivesk8er3 i know i was just wondering which one i should get, these 08-3s or the new hr 1.1s

[WeLongBoard]

Some1 please reply to this question:

1. Anti-Rockers? Or no anti-Rockers?

[TheAsianSensationFTW]

@WeLongBoard freestyle frames or with anti rockers, never skate with just a frame and no rockers

[tomburrows1995]

chris haffey - new chuck norris/KFC colonel

[elad610]

@tomburrows1995 i prefer anti rockers over flats or freestyle.

[minirzrsroller]

'Not many people take time to experiment with them..' give me an unlimited amount of remz skates and i will 'experiment'

[lucilor]

I skate mine the same way.. I'm such a poser :)

[ManiacLord654]

Will a Razors cuff or a remz OS cuff fit the 08-3?

I want to try mine v-vut but I want to be able to go back to normal cuffs If I don't like it.

[ammitzboll]

I just set up my 0803s with the strap on the outside and no buckle, the v-cuff was allready there.... it's AWESOME way more comfortable!!!

[1002themk17]

I'm getting the 0901s tommorrow I got em from AggressiveMall last thursday!!! Can't wait to skate em, my first remz skates!!!

[davemirra145]

i had my Remz 03 Set up like this. its a realy good setup and feels alot more comftable

[iLik3Toblade]

i am a little confused about how to V cut it im getting these sk8s in like 15-21 days anyone mind helpin???

[485scottc]

im thinking about getting the haffey 2.0s but im not sure about the v-cut dose that change the skate by alot???

[ThisWierdGuy]

@485scottc ya i think they give a whole new experience, i just tried remz v-cut skates and i like it a ton. way more flexibility. but main thing is try a friends and see what YOU think. everybody likes different stuff

[lucilor]

@485scottc Kinda.. You get more flex and control. I think

[atrxroller]

@morbus123456 i agree ,he really deserves it

[jam35789]

"some swiss bearings if...ur trying to hall balls" haha

[DeatWereWolf]

respect for having your custom, but i think the whole originality of REMZ is that they are fat and chunky, RZR's are thin small compact,

Remz are the sexy big shoff off ones and thats why i love them

[jschrank534]

how do you put the bearings in the wheels?

[SKEPSone]

RETARD on youtube.

[secretsaj007]

hey man go to aggressivemall chanel

[laser1675]

are they really that costumizable??? because i thought of buying either a pair of ch1s for 70€ or a pair of 0801 for 150€.....

[secretsaj007]

yeah they are get remz 0901s there new

[imissangel]

I Vcut my 0703's that i bought from a friend, just to see how they were. ill be buying the 0901's soon because just putting these skates on inspired me that this is the best brand ever. Ive tried Valo and razors, and the comfort in remz is way better. Vcut gives the support that you need in skates, but more freedom to move ankles and jump higher. it takes a few minutes to get used to though. Im definately gonna set up my 0901's like this.

[WelcomeToSF]

that dude GCuprising needs to get the fuck of youtube because hes spamming every video with stupid ass comments....plus hes commenting about shit he knows nothing about

[hightstownhyphy]

can i put a flat cut cuff on my os2's (they have a v-cut liner)

[wwwsuckmycoockorg]

yes you can

just buy buckle with flat cut from like brand like razors or remz as you like

[roces14s]

thats a bomb setup !

[marcust123456789]

ohh alright thanks

[marcust123456789]

how does he get the strap on the cuff?

[CrucifyTheFlesh]

@marcust123456789 They are fitted on with a philips head screw set up, as is the buckle, so he just took out the strap from inside, took of the buckle and replaced that with the strap!

[markopizza]

they come with another strap that you can attach top the same spots as the buckles...just unscrew the buckles and attach the straps to the same wholes.

[playboyvinny]

dope

[chrisblumarten]

vg roots only not vg 20 different video

[sheeplikesganja]

i dunno how but theres no 08 3 skates other than size 8 and size 12 to buy in the uk

[atrxroller]

chris haffey should get payed more than that bitch "tony hawk"

[abcjc1]

how much do you think chris makes a month or year from his sponsors and competition earnings?

[atrxroller]

i dont know really ,but im guessing from the sponsors 1000 to 1500 dollars and from competitions it depends

[GCuprising]

are you fucking kidding me haffey might get paid 300 dollars a month from his sponsers combined..he probly only gets paid from remz anyways..you seriously expect vibralux or 4x4 to pay him monthly? the only time he makes money from those companies is when he comes out with a video section, or a pair of jeans with vibralux

[norsw]

i think i read an article about chaz sands earning about 20 grand from skating, i would expect haffey to be near that amount but i duno.

[JaCk123tOiBiN]

he makes 1,000,000 collars a yaer im and aragon both make aroudn that i saw it on some site ranking the top 10 extreame sports atheletes years earings haffey comign #10,showing that rollerblading isnt as small as people think:D

[Capandash]

The only reason Haffey could get so high on that list was the year I think 2007, when he earned like 28G in a week by winning the four biggest comps of the year. So they heard he earned that amount EVERY week and put him on. He gets nowhere Near the amount of the big skateboarding/bmx whatever names, with their massive merch empires and what not and it makes me sad =( him too probably aha

[laser1675]

@atrxroller so fucking true!

[xweirdpurex]

lol... themgoods swiss bearings if you wana haul balls. haha funny stuff man funny stuff..

[arizzle114]

Hardest skates eva to break but once i did the th v cut just like haffey it was a lil better but i hate the liners that these come with has antbody tried anyother liners with these skates?

[flowerpotproductions]

they are hard to break in???

What is the easiest way to break in skates??

please respond!

[sheeplikesganja]

skate them:l

[billybobblader]

Santee style...

[FolloYourToes]

these liners rock, idk what your alking about. i used to hate the liners in my OS2's cuz they hurt my shin, then i just learnt how to grind lower. if they hurt your shins just get lower itll feel much better. and maybe you need jug liners, as remz liners are soft liners. jugs are not, they are hard liners. different feel = different skating style and perspective the choice is yours

[billybobblader]

Do up your skates tighter and get rid of the buckles, makes the tonque feel better

[TRSbroskow]

"GO BUY SOME OF THESE PUT SOME MONEY IN MY POCKET" haha...i didnt kno they got paid 4 every model skate sold...good 2 kno

[free2eatpaint]

do what he says. he is chris haffey

[Randy1337]

@free2eatpaint

:-)

[omarguadiana02]

@free2eatpaint y dont buy his skate instead of messing up yours haha, id rather buy his skate then cuting my 0901 s ( =

[electriklady06]

if u WANT TO HAUL BALLS haha

[dennisrollzonremz]

minirzrsroller, that's how haffey skates them, you don't have to agree but it's not wrong. i've tried a lot of ways. eventually i ended up with no cuff, strap on the outside just like haffey. it gives you lots of flex but still a lot of support. skate the way you want to.

[calvinsme]

same as me i took out the cuff strap on the outside it gives it a weight reduction by a small amount but and more flexibilty i havent tryed taking the pad out the lining yet tho mmmmm comfy

[minirzrsroller]

"some people don't take the time to experiment..." Well think about it, would you buy a $550 aus dollars skate and take a pair of scissors to them and end up with a skate with no cuff, buckle or straps... that's basically another 3 months EXTRA work to save up again. how i admire haffey, he's pretty dumb

[GregPollard]

well he got them for free so i doubt he gives a shit.

[tijoskate]

He says most people dont take the time to experiment, but I think most people dont want to ruin a 300 $ pair of rollerblades :P

[aeroman35]

what happens if you rip the cuff and buckle off? WTF are you gonna do then

[iriedreadlock]

u obviously dont have remz ...

[ChemiSimiyu]

Well don't rip it off lol, just use an alan key to take em off.

[Sk8inOnRemz465]

you can usually unscrew the buckle but he gets them for free so i doubt he cares

[bashyernanmeight]

I've been skating the strap on the inside, v-cut and after about 1 and a half months the strap started to fray and the velcro came off the material at the back, so i went back uo the buckle and have to say i prefer it.

Just a heads up

[6000bpm]

awesome i think im guna keep em in. if anyone has done the v-cuts drop a comment let me know whats diff about the v-cuts in or out n y. id love no know bet theres a few others aswel tht would wana know to.

peace

[6000bpm]

i want to try the v-cut but i dont want to cut my skates then not prefure it that way. is there anyhting i can do???

[liamfitch123]

what do you use to V-Cut the cuffs

[FreeskierSean]

thanks, ill need to get a pair for myself

[esjarv]

i'm gonna skate the Formula 1's, better slide. and i'd rather have m1 anti's than the tiny GC ones.

[FreeskierSean]

how are the featherlight frames? do they lock on well

[alec582]

what do you v-cut?

[ChemiSimiyu]

The cuff for the skate has a little pattern you can cut along (in the end its like the OS cuff which is Pre V-cut)

[GoReGaDgEtShAnK]

i tried this the other day and i found it to be much better

comfier and more flex

[willmanhi1]

remz 08-3 or xsjado farmer 09's?

[AdamMemon]

famers

[ChemiSimiyu]

XSJADO skeletons break way easy, go for REMZ you can't lose.

Perfection in skate form

[willmanhi1]

nah lol im going for the valo alex broskows!

[tleytek]

i went for those instead of remz 08-3 and i wish i could take them back, don,t get the valos .. go for remz you wont regret it

[calvinsme]

i totaly agree i was gonna make the same mistake and i am so glad i didnt

[bmxdeco]

my setup is gc frames, euogoly esien wheels, stock bearings, no velcro strap nd v-cut with stock liners

[urinsane22]

these look darker than the 0803's... howd you get them in the colour scheme

[FrEeDoMoFfEeT09]

is there an os3 coming out ?

[w0ddi123]

yes there is and iv finnaly seen a pic of the 0901s nd i gotta say they look sick

[donovan109]

i tried this and it was too flexy

so now mine is vcut, with buckle

[dtroll4life92]

any one help me you know he has velcro buckle does he have it on the outside ov both cuffs or the inside one like it comes

[bashyernanmeight]

think he sais "outside" i.e. where the buckle was. i personaly tried this and found unless you have them ridiculously loose theres quite a bit of extra strap

[bashyernanmeight]

says*

[agentkung]

its 2 velcors the 1 inside and the 1 on the cuff so where the buckle was its not a velcro strap :}

[AggressiveSkateFilms]

my setup would be the same as his

[aggrowheels]

yes they do

[bigzooka]

Yo I got some Razors Cult 8's. But I'm thinkin of getting these. I'm just a little confused. Do they got ankle supprt compared to Razors? I hear they are much like razors, and at the same time I hear they suck. Help me out please.

[dtroll4life92]

cult 8s are shite

[fullyflared213]

I'm depressed because I work at time warner cable

[fullyflared213]

culo culo culo i like your booty. big booty big booty big booty

[fullyflared213]

Remz are meant for V-cut. That's the whole idea of the freedom of feet. If you can't skate Remz with a V-cut cuff, then I suggest switching to Razors or something else cause you're not really skating them to their full potential and what they were meant to be. The difference is having more freedom with your ankles and leg movements while still having support in them. Trust me, if you had one boot with a full cuff and one boot with a V-cut cuff, you'll really notice the difference.

[BOnegraffiti]

is the OS1 a good skate

[alsipwoodpusher]

v-cut is terrible, i would suggest not doing it, unless you want your ankles and legs to hurt more.

the rest of the setup is a good idea, just not the v-cut. oh no.

[seansezs]

well do your ankles hurt? or do your legs hurt? like is there too much flex so your ankles hurt? and do u have the strap tightened down? i mean it might just be when your jumping your using new muscles so its a strain at first.

i just ordered these skates so im curious as to how i should set em up. i planned on v-cutting them cuz i got the jug precise v-cut liner :S

[JaCk123tOiBiN]

the jug precise linear isnt good at all i have one myself;it rips quite easy and is extreamly thin...i would reccomend keeping the nice Remz liner becasue it is the comfiest linear out their;and you can actually cut the remzs linear to a V (theirs a soft tissue part) and it works well

[seansezs]

hmmm, ill see :P cuz the jugs v-cut liners had shitty reviews so i got the precise v-cuts which had really good reviews. i actually like thin liners as long as theres padding.

[JaCk123tOiBiN]

well okay...but the problem is their isnt alot of padding...its pretty thin all around and down by hour heel,mine is worn so much my socks now rub against the plastic on my boot...which actually isnt bad atall if im wearing 2 pais of socks lol

[seansezs]

hmm i usually wear tube socks lol. im used to shit wearin down.

[seansezs]

well i got the skates + the liners. i have to admit the liners dont work well with the skates, but they do work well with my cult 9's lol, i also had picked up the v-cut cuffs for em. i have to admit. the v-cut is a bit unstable but i've been skating them for about 1 week...and already got adjusted to it. its true you can jump higher. i managed to get up on this ledge i couldnt be4. great skates. only thing is the featherlite 2s wear out really fast. already got chips in em. :/

[JaCk123tOiBiN]

depends really...i like my skates v cut because top sides are so effortless and give alot more flex...i skate os2s at the moment and they have a great V cut...but yes it can be annoying because of thin Jug linears...also falling wrong froma height can easily break your ankles in them...i fell 540ing a spine with v cut and compleatly twisted my ankle:( but i prefer it to normal cuffs now

[wagalagger]

ok so im wondering what a v cut would acually do to help. cause i dont wanna cut my skates with out knowing what the hell it would do to help me out.

[Michiraw7]

It gives a different feel to rolling around and it leans back a lot more, allowing a different way to jump, usually  higher.

[scooterrules07]

that is the best way to skate them

[w0ddi123]

the new os 3 white and grey look nise i have 0803 nd the buckle comes unloose loads nd falls off sometimes nd same thing happend to some off my m8s who have them

[SteelBanner]

i have been skaten razors for all my lifebut im thinkin of gettin 0803s

[atnalta23]

im rocking the remz os08 ground control flat black with 4X4 haffey wheels with red barings

[Needlephreak]

i roll my remz 0702's cuff-less

it's just alot easier to take the cuff off

yadidimean

[remzskaater]

did he cut them himself ???

[remzskaater]

ne 1 now wa frames i shud get?? myn are dead

[msorokin1]

anyone know how i can make my 0802s lighter? i have them v-cut, buckle off, i have the stock frames with the anti rocker wheels out. what can i do to make them lighter?

[HolaBabyMilo]

just wear freestyle frames, with your boot set up thats the lighest way the rest will make it a skate hazard

[remzsk8r2k9]

ive just watched chris haffey on lg action sports on extreme sports

[mollste001]

I like these blades but I havent skated them before because I like the Remz OS 2's

[remzsk8r2k9]

im a size 10 in trainers what size shall i get in the remz o8 threez

[msorokin1]

i have a couple questions. i have the remz 0802s. i vcut them and i took of the buckle. so heres my question. the inner black wheels, the plastic small ones, what are they for? and does it effect how they skate when you take them off? because i grinded on some curbs and its shredding those wheels and just making it harder to get some speed cause of the friction. so im hoping you guys could tell me a good set up for remz 0802s.

[skatewreck]

they are for helping you lock into grinds keeping your grind in your h block and not sliding were the wheels are. its your choice to take them out but if you are i would say buying your self a pair of freestyle frames. hope this helped

[LESSthanDaniel]

Those are anti rockers, they help you lock on. If they are catching you up switch to gc freestyle F1's. Wider h block should help

[msorokin1]

what are the pros and cons of switching to a freestyle frame?

[HolaBabyMilo]

well fresstyle frames are lighter and when you lock on better in my opinion, and grinding ledges you are on top of it instead of on the edge of it

[jLaCrMz]

my set up

remz 0803 GC FTL 2 GRAY BACKSLIDE AND SOUL BLACK

4X4 SHIMA WHEELS AND BONES SUPER SIX SWISS BEARINGS

[gloalath]

i roll cuffless

[w0ddi123]

i v cut mine they feel nise

[RemzSkaTers24]

i skate my remz 0803 v-cut [:

they fell alot better i feel more flex. and maryotk to v-cut yur cuffs jusst takelike a saw or suthinq and go threw the dotted lines great skate get a pair

[LESSthanDaniel]

I ride v cut, no strap, formula 1 freestyle, 4x4 farmers, themgoods pro bearings cuz im broke and cant afford swiss haha

[maryotk]

how do u v-cut somone answer plz

[rayzonfire]

its really simple. on your cuff there is an outline in the shape of a V, just cut the V out along the lines. to make it easier fold the skins down.

[w0ddi123]

hey has any1 actualy seen a vid of chris haffey skating remz 0803 cuz i ant

[rayzonfire]

i think he skates em in the Vibralux On Top trailer(look it up) and im certain he skates them in the DVD

[w0ddi123]

thanks

[mercwrc]

would this work with the 0802's?

[4x4shimanator]

It works with any remz 0803//0802 are actually the same in different colors so if you want to try go ahead