@BrittonDeJong oh man i have been doing it wrong then! haha what he should do is run a NS2 before all his effects and run his compressor at the end with his distortions on the send and return so you get the gain without all the mess (: NOT hating on him, everyone does signal chain differently but I just dont like zee dirt!
This pedal is not very expensive! for an initial investment is great. Works well with an equalizer like the video to give a booster in the sound. I'll post a new video with other pedals, wait!! Thank you.
yeah, really think that its a better investment in the long run than buying a bit cheaper Digitech Hothead or even a real cheap behringer which probably is made of plastic :(
The ideal is to combine the two, use the ds-1 and over-drive to use boost with little distortion. Use an equalizer to enhance also the gain of the chain of pedals right? thanks for asking.
hey saw your videos,m really impressd with your sound and set up brother...i bought stomp boxes bt m little confusd how to order up my pedals and all gears to get good professional sound.can u plz help with this?would be really great man ,thanx. i have, BBE pedal supply power, bossDD3, bossBD2, bossCS3, ibanez TS9, bossNS2, boss RC20XL(loop pedal), Joe satchurator dist pedal by VOX, boss CS3, line 6pod xt live, crybaby all kind of suggestions also welcome bro.thnks
if you have the noise supressor instructive check it out how to put your pedals you must connect them in the send and return them to the noise supressor by the way put the crybaby at last
crybaby at last?? bti read it shl dbe after gtr n b4 distrn pedals is it rite?? my set up is now....GTR-AMP INPUT / NS2 SEND-satch-bd-ibanez-wah-NS2RETURN / AMP sendFX-delay-rc loop-pod xt- AMP FX RETURN so is this ok?? plz usggest..thnk u bro :)
well the crybaby i use last because i have the noise supresor i recomend you to remove the line 6 pod because you will have the same effects twice i would use it like this
Guitar input-crybaby-outpot-input ns2send all the effects and return them to the return in noise supressor\ ns-2 out to the delay and delay to amp thats how i use it it should be good like that because all the hum would be on the ns-2 and wouldnt go to the amp
LOL where is your suppressor... all that gain.. no gate? no no no!
helloitsanthony 5 months ago
@helloitsanthony stfu, he can do whatever he wants
BrittonDeJong 4 months ago in playlist Effects
@BrittonDeJong lol i guess if you want 100% preamp fuzz when you arent playing. its just dirty
helloitsanthony 4 months ago
@helloitsanthony dirty is the new clean, bra!
BrittonDeJong 4 months ago
@BrittonDeJong oh man i have been doing it wrong then! haha what he should do is run a NS2 before all his effects and run his compressor at the end with his distortions on the send and return so you get the gain without all the mess (: NOT hating on him, everyone does signal chain differently but I just dont like zee dirt!
helloitsanthony 4 months ago
lots of money there.. ! nice, gonna invest on a ds1 as my first pedal
rrgert4 6 months ago
@rrgert4
This pedal is not very expensive! for an initial investment is great. Works well with an equalizer like the video to give a booster in the sound. I'll post a new video with other pedals, wait!! Thank you.
ca3estudio 6 months ago
@ca3estudio
yeah, really think that its a better investment in the long run than buying a bit cheaper Digitech Hothead or even a real cheap behringer which probably is made of plastic :(
rrgert4 6 months ago
ORIENTAL MELODY. One of my fav
kenisinoregon 8 months ago
@kenisinoregon
It is also my ... joe satriani
ca3estudio 6 months ago
oh u got SD2...best boss ovedrive
StratLM 1 year ago
where is the multi-power pedal source for all those boss?
digupherbones 1 year ago
This pedal does not have ... use one source to six pedals that supplies power to all without falling! ok!
csaguitar 1 year ago
hey man i see you have the boss ds-1 sha ll i buy it or should i buy the boss md-2 i mainly play hard rock/metal
subfiction1 1 year ago
For hardrock, is the best Overdrive, BOSS is anyone, currently I do not use this setting. I'll post a new set ok
csaguitar 1 year ago
@subfiction1 get a Boss OD-3. its great
RyanAndLindseyMusic 1 year ago
@subfiction1 buy an md-2 you can play both with it and you have more options...
dunavidrava 8 months ago
@dunavidrava
This pedal is great ... very versatile
ca3estudio 6 months ago
Hey man, one tip for free! Buy a Boss multieffect pedal it`s the same but cheaper!
Marguns 1 year ago
I have the BOSS GT10 ... I'll post pictures soon ....
thanks for the tip!
csaguitar 1 year ago
@Marguns Yes cheaper but the tone is not the best
wiiloco111111 1 year ago
Sweet!!!:) I would only place chorus instead of looper ... but hey: congratulations on the great pedalboard!:)
C4B5A6 1 year ago
what is better, have single analog pedals as boss od 3 and boss ds 1, or to have only the boss od 20
dddshuffle 1 year ago
The ideal is to combine the two, use the ds-1 and over-drive to use boost with little distortion. Use an equalizer to enhance also the gain of the chain of pedals right? thanks for asking.
csaguitar 1 year ago
of whatever pedal has the east cost
MyCHiPsI 1 year ago
'm not sure! these pedals are old!
Only Specialized store!
csaguitar 1 year ago
'Im not sure! these pedals are old!
Only Specialized store!
csaguitar 1 year ago
what song is? que cancion es la que suena?
9jean2 1 year ago
Joe Satriani - Oriental Melody.......
csaguitar 1 year ago
iai vende kra??
gabrielsonchini 2 years ago
Estou vendendo BB-2 BluesBraker II - Marshall e FAB Distortion - Danelectro, breve vídeo!!!!!
csaguitar 2 years ago
that bcb 60 is a old one or wtf the ones they sell actually are difeerent by the way whats that dual overdrive?
tonnyiomi 2 years ago
Give a shit????
26bond 2 years ago
gross
PopExpo 2 years ago 2
dual overdrive ?? never seen that one before, whats special about it ?
AstroShon 3 years ago
you can use them both at the same time and combine the two for a in-between overdrive
iLikechevelle 2 years ago
I think it's stupid to have Boss pedalboard BCB60. I prefer make my own one.
YoKitKat 3 years ago
Brother ... You only need to assemble the right order of pedals ... A few tests .. thanks
csaguitar 3 years ago
This has been flagged as spam show
bipin13 3 years ago
if you have the noise supressor instructive check it out how to put your pedals you must connect them in the send and return them to the noise supressor by the way put the crybaby at last
tonnyiomi 2 years ago
crybaby at last?? bti read it shl dbe after gtr n b4 distrn pedals is it rite?? my set up is now....GTR-AMP INPUT / NS2 SEND-satch-bd-ibanez-wah-NS2RETURN / AMP sendFX-delay-rc loop-pod xt- AMP FX RETURN so is this ok?? plz usggest..thnk u bro :)
bipin13 2 years ago
well the crybaby i use last because i have the noise supresor i recomend you to remove the line 6 pod because you will have the same effects twice i would use it like this
Guitar input-crybaby-outpot-input ns2send all the effects and return them to the return in noise supressor\ ns-2 out to the delay and delay to amp thats how i use it it should be good like that because all the hum would be on the ns-2 and wouldnt go to the amp
tonnyiomi 2 years ago
That does not make more ...
There is another model on the market!
csaguitar 2 years ago
realy cool
DonFicoMontana 3 years ago
that was awesome man.check mine..
arkinneas 3 years ago