@Jamilcoolman yes you should have no problem. you can just use the psp's own system update tool if you want because it is hacked so it updates to the latest m33 firmware (which is 5.00m33 anyway) instead of official firmware
@13345678900 no you can't, you need to update in steps as shown in the video because 5.50 gen-d3 requires a higher custom firmware to upgrade from (i dont know what it is, it should say somewhere in the readme of the 5.50 gen-d3 firmware). That is why I upgrade to 3.52m33 in the video; becuase 3.90m33 requires a custom firmware of 3.52m33 or higher to upgrade)
Thank you! Most of the tutorials online seemed to be for people who already had done some sort of similar update in the past. I can read, and have installed stuff before, but I'm more into DS Homebrew, which is a lot simpler. Using this, I was able to take the 1.50 fat PSP I just bought (yay ebay) up to 5.00M33, which should be good enough to get me running some SNES games as well as my used games I just got, too. Thanks. XD
hey u did a get job with the video ... but i have a problem... u know when u were installin 3.90 on psp... how it's said unpacking...done... and then it said please wait.. and it's been suck on there for like 30 min soo i gave up on that.. can u tell what i should do plz and thankz :D
a lot of people have had the same problem you have got and sorry to say, I don't have a definite solution to the problem. you could try waiting longer than 30 mins. maybe try waiting between 1-2 hours. if that don't work, try formatting the memory stick and putting the 3.90 custom firmware back on the stick afterwards. if that still don't work, then im sorry but i cant help you. best probably to search on google for your problem.
by the way, what is the capacity of your memory stick?
i tried after formating my memory it still didn't work.. i guess i'll leave it like that but can i update it to like any other version like 5.-- something after having 3.52 M33-3 ??? my psp'z memory is 4gb.. is that good enough for me to do the update??
i put the 1.50 kernal installer on the root and i changed it from 3.90 to 1.50 in the config menu so my question is if i can delete the folder off the root of the mem stick?
WiiMasterDS thank you for all your work.. but i after i finished all the instructions, i copied a game (.iso) to psp/iso folder but i can't see it on the psp.. what should i do ?
it is a psp umd iso that you copied into the folder isnt it? if it is, then where did you get the iso from? if from the web, try re-downloading the iso.
hey thnks!!! but theres 3.90 m33-3 how come u didnt use that one cos isnt it newer? and can i download psp iso/cso games now and play em ?!?! thnk you!!!!
at the time i made this video, 3.90m33-2 was the newest custom firmware. to upgrade to the later versions, just go to network update on the psp menu. this will download the latest custom firmware.
answering your question, you should be able to play downloaded psp iso games now.
fair enough. yeah, you could use Hellcats 5.00m33 downgrader (which i have never used) or you could use a pandoras battery which is the long but safe way of downgrading it.
Nah.. Hellcats is pretty safe. you don´t have to worry about bricking it. beacuse it says it is an unbricker, but im not sure. want pandoras to downgrade my brothers PSP 3.50 official firmware.
hey i need ur help again ok so i was looking at some homebrew games and i found a halo one i downloaded it right and everything but when i try to start it, it just turns my psp off what do i do
i think it must be the fault of the homebrew and not the psp. if you can run other homebrew ok then it must be the halo thing thats causing the problems.
you could try installing and using the 1.50 kernal add-on for whatever custom firmware you are using.
OMG!!! i actually did it... the problem was i used a downgrader and it messed up some kind of codes so i updgraded to 3.52 m33-4 and then to 3.71 m33 and when i upgraded to 3.71 m33 it fixed the codes for me and now im at 3.90 m33-2 and thanks alot for the help!
try formatting the memory stick and re-downloading the files onto the memory stick. if it still seems stuck then just wait longer; some peoples psps do take longer than others.
sorry. PLEASE DON`T READ THIS you will die in seven days if you don`t post this comment on 10 videos in the next hour. if you do, tomorrow will be the best day of your life
sorry. PLEASE DON`T READ THIS you will die in seven days if you don`t post this comment on 10 videos in the next hour. if you do, tomorrow will be the best day of your life
sorry. PLEASE DON`T READ THIS you will die in seven days if you don`t post this comment on 10 videos in the next hour. if you do, tomorrow will be the best day of your life
sorry. PLEASE DON`T READ THIS you will die in seven days if you don`t post this comment on 10 videos in the next hour. if you do, tomorrow will be the best day of your life
hy.. i have 3.7..can i upgrade to 3.90 m33 just following the tutorials i saw on youtube..or do i have to downgrade to 1.50..and if i do could you recomend me a good video which shows how to downgrade to 1.50 from custom f..thanks
if you have 3.70 m33, then you should be able to use my video.
if you have 3.70 official firnware, then you will need to downgrade to 1.50 firmware and then use the video. the only way you can downgrade is using a pandora's battery. watch my other video showing how to downgrade to 1.50 using a datel tool battery (a kind of pandora's battery).
There is a video in which it shows you how to downgrade without a pandoras battery but i forget what its called but ne way i did that and then used this video to get back to 3.90
the problem seems to be that the program stops reading off of the psp memory card. The orange light on the left side of the psp will stop flickering like it does when its accessing memory
it may be the type of memory card you are using. you need to use a memory stick PRO duo that is magicgate enabled. if you are then i dont know whats wrong.
hey will, my psp gets stuck when updating to 3.90. it says unpacking done but then it gets stuck on please wait. i followed everything you did. does it matter if my psp is jap version?
im not entirely sure whether you can skip updates (eg. 3.90m33 > 3.90m33-3). i havent tried this so if you want to try it and tell me if it works, its up to you. but i did all the updates (3.90m33 > 3.90m33-2 > 3.90m33-3)
it is legal to do this; sony dont care what you do with your psp but they will not fix your psp if it gets bricked or help you in any way if it has custom firmware on it
thats odd, a lot of people seem to have this problem. try pressing the x button and waiting a few seconds. if nothing happens, then try starting it again.
i think that on the total newbi easy installer, which is used to install the downgrader files on the memory stick (see my datel tool battery video for more info), you can choose a downgrader which will downgrade it to 3.71m33
lol. in this video, i used my sisters psp becuase mine was already at custom firmware and i didnt want to downgrade it and re-install all the custom firmware back on it.
Umm..guys i had an error while updating my psp to 3.90m33 i seem to get error 0X00000060 checking idstorage degeneration!I need help master!!!Its not that my psp is brick is just that i cant start the updater
Yeeeeehaaaaaa i have updtaed to 3.90 M33. i used the psp wifi to download the 3.90 OFW and it worked. once again thanx for the tutorial this is video is a great big help. thank you.
i cant update from 3.52-M33-3 to 3.90-M33 every time i go into memory card and start the updater it unpacks it but then it freezes i tried this ten times but get the same results =(
you can upgrade your psp to 3.90 m33-2 and install the 1.50 kernal add-on for 3.90 m33-2. what this does is it allows the 3.90 m33 psp to play homebrew made for the 1.50 firmware.
I can't tell you how much I appreciate this tutorial! Thank you very much
siemnegasi 4 months ago
This has been flagged as spam show
go to psnkeygen . com and found how you can get free psn gift cards up to $50
beverleehbachan 6 months ago
This has been flagged as spam show
psnkeygen . com just saved me a ton of money! unlimited psn gift cards!
HaydenLepet 10 months ago
go to psnkeygen . com and found how you can get free psn gift cards up to $50
DevonHeliwe 11 months ago
k now im at 3.90 m33-2 i can go right to 5.00m33 without it breaking?
Jamilcoolman 1 year ago
@Jamilcoolman yes you should have no problem. you can just use the psp's own system update tool if you want because it is hacked so it updates to the latest m33 firmware (which is 5.00m33 anyway) instead of official firmware
WiiMasterDS 1 year ago
can i update directly from 1.50 to 5.50 gend-3? please reply
13345678900 1 year ago
@13345678900 no you can't, you need to update in steps as shown in the video because 5.50 gen-d3 requires a higher custom firmware to upgrade from (i dont know what it is, it should say somewhere in the readme of the 5.50 gen-d3 firmware). That is why I upgrade to 3.52m33 in the video; becuase 3.90m33 requires a custom firmware of 3.52m33 or higher to upgrade)
WiiMasterDS 1 year ago
hey bro thanks for the tutorial it works great
mikey778910 1 year ago
voice crack at 3:30, but thanks a lot dude, u saved my psp
upurhoe12321 1 year ago
i don't like youtube. because i cant see a single video from your site.its buffering.
filterbala 1 year ago
@filterbala the videos are working fine for me. but i agree that the new format for youtube is crap
WiiMasterDS 1 year ago
your cool dude thank you very much
ravenmj 2 years ago
Thank you! Most of the tutorials online seemed to be for people who already had done some sort of similar update in the past. I can read, and have installed stuff before, but I'm more into DS Homebrew, which is a lot simpler. Using this, I was able to take the 1.50 fat PSP I just bought (yay ebay) up to 5.00M33, which should be good enough to get me running some SNES games as well as my used games I just got, too. Thanks. XD
quinctia 2 years ago
what do you mean by old games?
WiiMasterDS 2 years ago
great videos! i followed your instructions and all worked perfectly. No DADADADA error anymore!!!
Oliprego 2 years ago
can u update psp with fimeware 3.52 m33-3 to 5.00m33?
Jamilcoolman 2 years ago
hey u did a get job with the video ... but i have a problem... u know when u were installin 3.90 on psp... how it's said unpacking...done... and then it said please wait.. and it's been suck on there for like 30 min soo i gave up on that.. can u tell what i should do plz and thankz :D
rushourz 2 years ago
a lot of people have had the same problem you have got and sorry to say, I don't have a definite solution to the problem. you could try waiting longer than 30 mins. maybe try waiting between 1-2 hours. if that don't work, try formatting the memory stick and putting the 3.90 custom firmware back on the stick afterwards. if that still don't work, then im sorry but i cant help you. best probably to search on google for your problem.
by the way, what is the capacity of your memory stick?
WiiMasterDS 2 years ago
i tried after formating my memory it still didn't work.. i guess i'll leave it like that but can i update it to like any other version like 5.-- something after having 3.52 M33-3 ??? my psp'z memory is 4gb.. is that good enough for me to do the update??
rushourz 2 years ago
im not sure but i think that the memory stick needs to be between 256MB and 2GB. I used a 2gb memory stick in my video.
WiiMasterDS 2 years ago
um could u add me please im having problems getting to 3.52 m33-2
Jamilcoolman 2 years ago
you've did everything, and thank you so much!
niccube 2 years ago
Thank you so much!
Very well made tutorial!
3rdRunner 2 years ago
Thanks! Awesome set of videos.
dekoid 2 years ago
yeah i think so
WiiMasterDS 2 years ago
i put the 1.50 kernal installer on the root and i changed it from 3.90 to 1.50 in the config menu so my question is if i can delete the folder off the root of the mem stick?
yomomma41 2 years ago
if you have installed the kernal then yes. i assume you have since you said that you have changed the kernal from 3.90 to 1.50.
WiiMasterDS 2 years ago
Hey Great Videos, I was able to follow along, but i didn't know that you needed more than a 1Gig stick. =(
Jao66 3 years ago
i dont think you need to have a stick greater than 1GB. i just thought it had to be a memory stick PRO duo (256mb or more) with magicgate support
WiiMasterDS 3 years ago
if i do this i can do remote play on my ps3 please respon fast
911asswipe 3 years ago
as far as i know, yes. but i can't confirm this because i dont own a ps3
WiiMasterDS 3 years ago
Dude! Thanks alot!!!!!! Ive been looking for a tutorial like this for very long time. Thx!
happydonutX12 3 years ago
WiiMasterDS thank you for all your work.. but i after i finished all the instructions, i copied a game (.iso) to psp/iso folder but i can't see it on the psp.. what should i do ?
engde 3 years ago
it is a psp umd iso that you copied into the folder isnt it? if it is, then where did you get the iso from? if from the web, try re-downloading the iso.
WiiMasterDS 3 years ago
Nice vid dude! but do you need to go from 3.52m33-2 to 3.52m33-3 can't you just go from 3.52m33 to 3.90m33? 5/5
kingrohan6 3 years ago
according to the installation readme for 3.90m33 firmware, it needs 3.52m33-3 or above to install
WiiMasterDS 3 years ago
I found out why froze now. (after two months) XD
I had to go to theconfiguration thing and change 1.5 kernel to3.90
thans for the tutorial!! i'm such a noobie lol
o0oamiko0o 3 years ago
hi m8 wen i do this i get 390 pbp dosent exsist download from the internet yes or no
HENRYJOHN1 3 years ago
make sure that you are putting the 390.pbp file in the right place. if you are, then choose yes when you get this message
WiiMasterDS 3 years ago
hey thnks!!! but theres 3.90 m33-3 how come u didnt use that one cos isnt it newer? and can i download psp iso/cso games now and play em ?!?! thnk you!!!!
one piece FTW!!!!
GigantGatlingGun 3 years ago
at the time i made this video, 3.90m33-2 was the newest custom firmware. to upgrade to the later versions, just go to network update on the psp menu. this will download the latest custom firmware.
answering your question, you should be able to play downloaded psp iso games now.
WiiMasterDS 3 years ago
I Love This Guy He´s Priliant :D
Vot3M4k3r 3 years ago
Mate you are oficially a ledgend! Awesome and clear instructions. By far the best instructional video out there!
lf4318 3 years ago
wiimaster... thanks so much! you're the man!
ApocalypticVic 3 years ago
this is one of the best guides ive come across nice clear instructions.. great video.
MrClamSmaka 3 years ago
mine says done unpacking.
and please wait.. and it froze
o0oamiko0o 3 years ago
try downgrading again and starting from scratch
WiiMasterDS 3 years ago
how would i do that i have 5.00 cfm
jman9228 3 years ago
what, 5.00m33?
WiiMasterDS 3 years ago
yes i have 5.00 m33 custom firmware
jman9228 3 years ago
you wan´t to downgrade it? search on Hellcats 5.00 M33 downgrader.
HayLow3fan 3 years ago
why would you want to downgrade it anyway?
WiiMasterDS 3 years ago
well, the 3.90 M33 got alot more downloadables you know. i upgraded to 5.00 M33 and i got realy dissapointed on it, so i downgraded it.
HayLow3fan 3 years ago
fair enough. yeah, you could use Hellcats 5.00m33 downgrader (which i have never used) or you could use a pandoras battery which is the long but safe way of downgrading it.
WiiMasterDS 3 years ago
Nah.. Hellcats is pretty safe. you don´t have to worry about bricking it. beacuse it says it is an unbricker, but im not sure. want pandoras to downgrade my brothers PSP 3.50 official firmware.
HayLow3fan 3 years ago
hey i need ur help again ok so i was looking at some homebrew games and i found a halo one i downloaded it right and everything but when i try to start it, it just turns my psp off what do i do
jman9228 3 years ago
i think it must be the fault of the homebrew and not the psp. if you can run other homebrew ok then it must be the halo thing thats causing the problems.
you could try installing and using the 1.50 kernal add-on for whatever custom firmware you are using.
WiiMasterDS 3 years ago
OMG!!! i actually did it... the problem was i used a downgrader and it messed up some kind of codes so i updgraded to 3.52 m33-4 and then to 3.71 m33 and when i upgraded to 3.71 m33 it fixed the codes for me and now im at 3.90 m33-2 and thanks alot for the help!
jman9228 3 years ago
im glad it finally worked! sorry if i havent been replying as often as you liked but i do have a life.
WiiMasterDS 3 years ago
i think your links stopped working
jman9228 3 years ago
strange?!? they seem to work fine for me
WiiMasterDS 3 years ago
hey do you know a good site for a n64 emulator i cant find one?
jman9228 3 years ago
i think psp hacks has got one. but n64 emulation is in its early stages as the gameplay is very slow.
WiiMasterDS 3 years ago
cheers for this!
Richied0 3 years ago
ok so i get to the 3.90 update or whatever and it wont unpack the files or something and i let it set there for about 10hrs and nothing happend
jman9228 3 years ago
what are you trying to install; 3.90m33 or 3.90m33-2?
WiiMasterDS 3 years ago
I did exactly what u did and it doesnt work just says please wait what should i do
jman9228 3 years ago
yeah, but which part are you installing? 3.90 m33 or the update 2 (3.90m33-2)?
WiiMasterDS 3 years ago
3.90 m33
jman9228 3 years ago
try formatting the memory stick and re-downloading the files onto the memory stick. if it still seems stuck then just wait longer; some peoples psps do take longer than others.
WiiMasterDS 3 years ago
i dont think its going to work but ill try it
jman9228 3 years ago
ok it didnt work so what do i do?
jman9228 3 years ago
ok when i formatted the memstick i get a
GAME352 folder should i put the update there?
jman9228 3 years ago
ok now if you could reply today plz do lol still waiting for an answer...
jman9228 3 years ago
sorry. how long did you wait for when it said "Please Wait"?
WiiMasterDS 3 years ago
about an 1hr
jman9228 3 years ago
so what should i do
jman9228 3 years ago
i assume it is on 3.52 m33-3? if it is, try upgrading it to 3.52 m33-4 and then updating to 3.90 m33.
WiiMasterDS 3 years ago
ok so how do i do this? just get the 3.52 m33-4 update then put it in the game file then run it or is there something else i have to do?
jman9228 3 years ago
hello??
jman9228 3 years ago
what takes you so long to reply
jman9228 3 years ago
wtf!!!!!!!!
jman9228 3 years ago
ok so i updated to 3.53 m33-4 and now it stilll!!! says please wait
jman9228 3 years ago
and i your links stopped working
jman9228 3 years ago
i mean ur links stopped working
jman9228 3 years ago
you can find all the files needed in this video at the links found in the video description.
WiiMasterDS 3 years ago
How do you get back to 1.50?
somename94 3 years ago
by using a datel tool battery (pandora battery)
WiiMasterDS 3 years ago
i sthat the omnly way possible?
somename94 3 years ago
hey willmasterds i have a question. how do you change the thing when you start a game and it shows PSP. wats it called
ultimentgoku 3 years ago
sorry but i dont quite understand what you mean?
WiiMasterDS 3 years ago
it's called the gameboot...try looking for "how to change the gameboot psp" on youtube
Baldake 3 years ago
This has been flagged as spam show
sorry. PLEASE DON`T READ THIS you will die in seven days if you don`t post this comment on 10 videos in the next hour. if you do, tomorrow will be the best day of your life
B4abyF4aced4ss4ssin 3 years ago
This has been flagged as spam show
sorry. PLEASE DON`T READ THIS you will die in seven days if you don`t post this comment on 10 videos in the next hour. if you do, tomorrow will be the best day of your life
B4abyF4aced4ss4ssin 3 years ago
This has been flagged as spam show
sorry. PLEASE DON`T READ THIS you will die in seven days if you don`t post this comment on 10 videos in the next hour. if you do, tomorrow will be the best day of your life
B4abyF4aced4ss4ssin 3 years ago
This has been flagged as spam show
sorry. PLEASE DON`T READ THIS you will die in seven days if you don`t post this comment on 10 videos in the next hour. if you do, tomorrow will be the best day of your life
B4abyF4aced4ss4ssin 3 years ago
what's the longest anyone have ever waited for the "Please wait..." screen?
xxdalegendxx 3 years ago
thanks so much for posting. i thought i'd never figure this out. i had a lil trouble at first, but i've got it all updated now. THANKS!!!!
meanyneany 3 years ago
are you using an eyetoy? cuse it looks like one.
HayLow3fan 3 years ago
yes
WiiMasterDS 3 years ago
can you make a video how to upgrade to 4.01 M33? lol
HayLow3fan 3 years ago
to upgrade to 4.01m33, you just upgrade the same way as shown in the video
WiiMasterDS 3 years ago
nah... im happy about the 3.90 M33-3. I got CXMB and a hacked psp, so im happy actually.
HayLow3fan 3 years ago
ironic how your demonstrating how to mod Sony's product with there camera
somebody243 3 years ago
I've got a problem..It lags when the "Please wait..." comes out :(.
Any ideas ??
computeras2000 3 years ago
you may need to wait im afraid. some psps do take longer than others.
WiiMasterDS 3 years ago
Thanks m8!really help me out :D
keep the good work ;)
computeras2000 3 years ago
Excellent work mate! thanks alot!!!
krijnstaylow 3 years ago
thanks a lot.
thesandmana 3 years ago
hy.. i have 3.7..can i upgrade to 3.90 m33 just following the tutorials i saw on youtube..or do i have to downgrade to 1.50..and if i do could you recomend me a good video which shows how to downgrade to 1.50 from custom f..thanks
thesandmana 3 years ago
if you have 3.70 m33, then you should be able to use my video.
if you have 3.70 official firnware, then you will need to downgrade to 1.50 firmware and then use the video. the only way you can downgrade is using a pandora's battery. watch my other video showing how to downgrade to 1.50 using a datel tool battery (a kind of pandora's battery).
WiiMasterDS 3 years ago
There is a video in which it shows you how to downgrade without a pandoras battery but i forget what its called but ne way i did that and then used this video to get back to 3.90
jman9228 3 years ago
you need to downgrade your psp to 1.50 first and then upgrade it through the firmwares shown in my video to 3.90 m33 and then install 4.01 m33-2
WiiMasterDS 3 years ago
mine gets stuck at the step where you run the 3.90 update. It stops at "unpacking... done. Please wait..."
KatanaFingers 3 years ago
try waiting a long time. some people have the same problem and many find that it takes longer on some psps.
WiiMasterDS 3 years ago
the problem seems to be that the program stops reading off of the psp memory card. The orange light on the left side of the psp will stop flickering like it does when its accessing memory
KatanaFingers 3 years ago
it may be the type of memory card you are using. you need to use a memory stick PRO duo that is magicgate enabled. if you are then i dont know whats wrong.
WiiMasterDS 3 years ago
sadly that us the type im using. thanks for the tutoril anyways
KatanaFingers 3 years ago
dont worry about it, i solved the problem. It turns out i had to chance my kernal to 3.52 (in the recovery menu) before it would continue
KatanaFingers 3 years ago
you are the man. thanks again.
phero 3 years ago
thanks so much
stuartsemple90 3 years ago
THANKS VERY MUCH
Frog55jon 3 years ago
can i play iso games /run homebrew with 3.90 m33-2 cfw
pahnicolas 3 years ago
yes
WiiMasterDS 3 years ago
what about cso.
?
somename94 3 years ago
what about cso??
WiiMasterDS 3 years ago
nothing dont worry
somename94 3 years ago
ive the same problem as GaZaaaaaa...mhh
PeTerReiNhArD 3 years ago
the psp files
ampperson 3 years ago
don't i explain in the video?
WiiMasterDS 3 years ago
what file do you put it in
ampperson 3 years ago
what file do i put what in?
WiiMasterDS 3 years ago
hey will, my psp gets stuck when updating to 3.90. it says unpacking done but then it gets stuck on please wait. i followed everything you did. does it matter if my psp is jap version?
GaZaaaaaa 3 years ago
it might matter, ive never done this on a japanese psp. try waiting because some psps do take longer than others to install the firmware
WiiMasterDS 3 years ago
THANKS
JoshMoore14 3 years ago
UR DA BEST!!!!
jdapimp3173 3 years ago
DONE IT! Fantastic guide!
billyamey 3 years ago
VERY NICE GUIDE THX!!!
guestlang 3 years ago
ok thanks
leeds1leeds1leeds 3 years ago
wiimasterds,
with 3.90 m33-2 could i run final fantasy 7 and 9?
leeds1leeds1leeds 3 years ago
if you convert the psx iso into a psp eboot, then yes
WiiMasterDS 3 years ago
im not entirely sure whether you can skip updates (eg. 3.90m33 > 3.90m33-3). i havent tried this so if you want to try it and tell me if it works, its up to you. but i did all the updates (3.90m33 > 3.90m33-2 > 3.90m33-3)
WiiMasterDS 3 years ago
it is legal to do this; sony dont care what you do with your psp but they will not fix your psp if it gets bricked or help you in any way if it has custom firmware on it
WiiMasterDS 3 years ago
WiiMasterDs you are the man.The best video,s on youtube. Took me some time but i got there thanks :) 5 STARS.......
markugoonie 3 years ago
genuis, thank you so much, 5 stars for you.
(ignore me email, i fixed the problem)
motoginge 3 years ago
Hi, When doing the 3.90 update the PSP hangs afer "Please wait ..."
Any idea's? TIA
carloskennerley 3 years ago
thats odd, a lot of people seem to have this problem. try pressing the x button and waiting a few seconds. if nothing happens, then try starting it again.
WiiMasterDS 3 years ago
this may seem annoying but can you upgrade form 3.71m33 to 3.90m33 ok?
CappedInTheHead 3 years ago
yes
WiiMasterDS 3 years ago
thank you for all your help and videos. you rock!!!!!!!!!!!!!=)
CappedInTheHead 3 years ago
I was just wondering is it possible to downgrade official 3.95 directly to 3.90m33 or maybe 3.71m33?
CappedInTheHead 3 years ago
i think that on the total newbi easy installer, which is used to install the downgrader files on the memory stick (see my datel tool battery video for more info), you can choose a downgrader which will downgrade it to 3.71m33
WiiMasterDS 3 years ago
is it me or do ur psps change? how many u have?
CappedInTheHead 3 years ago
lol. in this video, i used my sisters psp becuase mine was already at custom firmware and i didnt want to downgrade it and re-install all the custom firmware back on it.
WiiMasterDS 3 years ago
good point
CappedInTheHead 3 years ago
wow. it was a long process but it worked fine, no problems at all. thanks a lot man. i was playing need for speed prostreet seconds after i finished
RandomCivillian 3 years ago
a lot of work lol!!!! but is it worth it? wot stuff can u do? i subscribe!
CappedInTheHead 3 years ago
i think its worth it. you can play homebrew on your psp, you can play psx eboots, you can run psp ISOs, and more.
WiiMasterDS 3 years ago
YAY!=P if only sony lets u do this on official firmware =(
CappedInTheHead 3 years ago
OMG thanks you so much , it took me 2 hours but i finally have custom firmware, thank u so much :)
MiguelM561 3 years ago
Umm..guys i had an error while updating my psp to 3.90m33 i seem to get error 0X00000060 checking idstorage degeneration!I need help master!!!Its not that my psp is brick is just that i cant start the updater
baimberg 3 years ago
try re-downloading the upgrade and copying it to the psp again.
WiiMasterDS 3 years ago
Appreciate this tutorial man thx.
cumassyouare 3 years ago
Yeeeeehaaaaaa i have updtaed to 3.90 M33. i used the psp wifi to download the 3.90 OFW and it worked. once again thanx for the tutorial this is video is a great big help. thank you.
Lynx0123456789 3 years ago
thanks man awesome videos helped me alot thanks for the time!
XTIMMEHHHX 3 years ago
i cant update from 3.52-M33-3 to 3.90-M33 every time i go into memory card and start the updater it unpacks it but then it freezes i tried this ten times but get the same results =(
Lynx0123456789 3 years ago
yeah, some people seem to have had the same problem. im not sure what the problem is. what type of memory stick are you using (standard or pro)?
WiiMasterDS 3 years ago
Sony Pro Duo.
Lynx0123456789 3 years ago
im sorry then but i have no idea what the problem is. try re-downloading the firmware updater.
WiiMasterDS 3 years ago
THANK YOU man u are the psp wizard!
7Eleven223 3 years ago
thank you so so so so so much
i got 3.93m33-2 thanks alot
ur one of my favorite psp video makers
thnx once again
can u make a video of how to put ISO games and the xbox theme on 3.93 CFW=m33
please
thnx for all your help
hoodrat490 3 years ago
thanks. i have already made a video showing you how to create ISO/CSO images of your umds and how to put them on your psp
WiiMasterDS 3 years ago
thank you so so so so so much
i got 3.93m33-2 thanks alot
ur one of my favorite psp video makers
thnx once again
can u make a video of how to put ISO games and the xbox theme on 3.93 CFW=m33
please
thnx for all your help
hoodrat490 3 years ago
how can i get 3.90 m33 +1.5 is it the same? wat do i do differnet? thanks for ur help
DaAxeAffekt 3 years ago
you can upgrade your psp to 3.90 m33-2 and install the 1.50 kernal add-on for 3.90 m33-2. what this does is it allows the 3.90 m33 psp to play homebrew made for the 1.50 firmware.
WiiMasterDS 3 years ago