yes i actually did mount the pump into the skid plate. the filter(s) are mounted between the tank and the "rear passenger" seat on the driver's side, another filter in the engine compartement, pre-carb. right now what is set up is actually an in-tank pump assembly for a fuel injected s-10 blazer... yeah, basically for that to work with a nikki u need 2 bypass regulators and a lot of practice and care.
haha why this is the worst vid ive posted... thanks though, isn't it fun to tinker? oh and i realized just now that i got the leading and trailing plugs mixed up... i was nervous dammit!
yeah its a 3/8 line in and a 5/16 out. it's the normal size... its not the size of the fuel line that is important anyway, the important thing is that the carb is getting the correct psi in (1.5 psi).
yeah, I used permatex aluminum antisieze, and I ended up pulling the autolites before I even started the car (see mistake), I found some ND's in my closet and just used those instead ^_^ thanks for your comment!
What is first song???
OPUSGarage 2 years ago
ummmm spanish flea i think
negautrunks 2 years ago
Mount the fuel pump into the skid plate? I hope you mean fuel filter.
Dirty6hettoKids 2 years ago
yes i actually did mount the pump into the skid plate. the filter(s) are mounted between the tank and the "rear passenger" seat on the driver's side, another filter in the engine compartement, pre-carb. right now what is set up is actually an in-tank pump assembly for a fuel injected s-10 blazer... yeah, basically for that to work with a nikki u need 2 bypass regulators and a lot of practice and care.
negautrunks 2 years ago
I LOVE YOU=)
fullymental307 2 years ago 3
haha why this is the worst vid ive posted... thanks though, isn't it fun to tinker? oh and i realized just now that i got the leading and trailing plugs mixed up... i was nervous dammit!
negautrunks 2 years ago
no wait... The RX7 needs a huge fuel line like that...
mylanman 3 years ago
yeah its a 3/8 line in and a 5/16 out. it's the normal size... its not the size of the fuel line that is important anyway, the important thing is that the carb is getting the correct psi in (1.5 psi).
negautrunks 3 years ago
Need to use Anti Seize compound on the spark plugs. And only use NGK or ND NO exceptions in brands.
vashguud 4 years ago 2
yeah, I used permatex aluminum antisieze, and I ended up pulling the autolites before I even started the car (see mistake), I found some ND's in my closet and just used those instead ^_^ thanks for your comment!
negautrunks 4 years ago
uummmmmm... That was painful. Download the Factory service manual and do things right, the first time.
bencouturier1 4 years ago
Yeah, you said it... painful... thats the word I was looking for!
negautrunks 4 years ago
you live and learn buddy. you need to make mistaked to learn.
tayb0987 3 years ago 4