KJW M9 full metal CO2 blowback review and shooting

[ipwn1911]

my next investment :)

[WojakCarlos]

I had it, but i had broken spring on trigger two times and i must repaired this.Anyway it is good gun. Sorry for my bad English.

[98lm013]

did this come with the threaded tip?

[YATairsoft]

@98lm013 No

[klashyn]

co2 damages the gun because co2 is essentially very cold. And so springs and such inside can freeze up and damage the gun. I prefer using the green gas, mainly because it has silicon oil in it and will keep the gun from squeaking and breaking..

[TabakmanT]

stupid question but i want to be sure: KJW and KJ Works are the same companies, right?

[YATairsoft]

@TabakmanT Yes

[MzSH4WTii3]

Can this gun use a CO2 WE mag

[YATairsoft]

@MzSH4WTii3 No

[gobldegook100]

Should I get this gun or the kwa m9 ptp?

[NoNeutralAirsoft]

@gobldegook100 KWA is more gas efficient but are you willing to pay 60 more dollars for almost the best?

[Darknight0781]

I find that shortyusa is the best place to buy guns, bought several there.. no complaints

[YATairsoft]

@Darknight0781 I live in PA and Shorty's is in Delaware so I have ordered from them several times and I think they're great. They just need a larger selection of everything.

[wnorton13]

@YATairsoft thats were i was looking to get this gun, apparently there good, but would this be a good gun to use for targets in my yard

[slashdeciple99]

have you ever used an hfc m9? if you have, which do you prefer? I was thinking about buying an hfc until this one caught my eye (i thought the paint and design looked better).

Please reply...

[YATairsoft]

@slashdeciple99 I have never used the hfc but I personally like almost all m9's because they're cool and Italian, like me.

[yeildinstruction]

@YATairsoft hey i have the same gun but i was wondering do you know if co2 makes the gun have stronger kick and makes it louder? i know it increases fps but i was wondering about the other two

[reape1987]

Bought mine from airsplat $96 dollars perfect condition

[ironchicken3o3]

What was the site he said he bought it from?

[YATairsoft]

@ironchicken3o3 Evike but when my friend got it, it had a bunch of scratches on it. We both recommend ordering from Airsoftgi when possible.

[InevitableResistance]

so it comes with a green gas magazine but it works with the co2 magazines?

[YATairsoft]

@InevitableResistance Correct

[michielvbec]

Are you sure that is a Co2 gun? I have the same gun and mine is with normal gas.

[YATairsoft]

@michielvbec If yours has a blue air nozzle, then it is co2 compatible but you need to buy the co2 magazine.

[SuomiBroadcast]

Just got mine today... lovin it :)

[bossrdt]

@YATairsoft can you tell me the bb size for this gun plz... ty :]

[YATairsoft]

@bossrdt 6 mm

[bossrdt]

@YATairsoft btw what bb weight do you recommend between 0.20/0.23/0.25/0.30

don't really know if there are heavier or lighter though 

[YATairsoft]

@bossrdt I use .25 in this gun. .20 are good too but a little too light for this gun. Never use .12 unless you have a cheap spring pistol. A lot of people use .28 in aegs but I use .20 and .25. Anything higher is usually reserved for sniper rifles but everyone has their own preferences.

[scottiboi1983]

0.3 is the way to go for sure

[joet0390]

@snarwars The cylinder you see in the mag is a CO2 cylinder. You can usually find them near the gbbs they have at Walmart. Hope this helps!

[jsbroadcasts]

where did you get the threaded barrel?how much did it cost?

[MrMuzicfreak110]

@jsbroadcasts You can get a ccw or cw threaded barrel at airsoftgi for $30

[MathieuCore2]

Do you live in Canada or USA ? i ask this question because i want to know if canada allow this gun...

[YATairsoft]

@MathieuCore2 USA. I don't know if it's allowed in Canada. Don't all their airsoft guns need a clear plastic body?

[MathieuCore2]

@YATairsoft well canada doesn't allow a lot of metal body gun...and the gun must not be all painted in black. but i dont know if we can anyway buy this gun from USA... i know a lot of my friend that got airsoft from evike.com so im asking myself for that... I HATE CANADA (for airsoft ''law'') sorry for my very bad english ;)

[YATairsoft]

@MathieuCore2 Evike has a Canada specific section, there's a link for it under guns. Good luck

[cafeledavid]

how do you get the orange tip off? i am looking for some airguns to use in future movies of mine, thanks

[YATairsoft]

@cafeledavid Normally it is painted on, so you would either have to cut the barrel or paint over the orange. In this video, you are seeing an aftermarket threaded outer barrel which never had an orange tip to begin with.

[cafeledavid]

@YATairsoft thanks for the reply, nice vid by the way, yeah i bought a outer barrel from evike, i called them and asked if it has orange paint but the guy didnt know :/

[caronliner24]

i am having a problem with my KJW m9 its the green gas version.i dont know why but when i aim it down the bb just slide off the barrel.does it happens to u guys?any way to fix that issue?

[kelbrandat]

@caronliner24 it happened to me to the other day all u have to do is if u take the barrel out and put it upside down theres that hop up ajustment thing. just take a small alan key and turn it then look down the barrel youll see a small thing stopping the bbs

[lakesawesome]

how many clips can you get out of 1 CO2.

[PIG2285]

best review of this gun i have found, so thanks. but does it have a decocker? every place i have checked doesnt say it does so I assume its a no

[YATairsoft]

@PIG2285 Thanks for the comment. No, it does not have a decocker.

[FreedomOfTheUSA]

Can this be used in CQB?

[YATairsoft]

@FreedomOfTheUSA yes. this is actually a very effective CQB secondary.

[verfugbarkite]

Could this pistol kill small mice. I am seriously fucking tired of my cats bringing in mice into my house. Actually could this pistol kill a cat?

[YATairsoft]

@verfugbarkite Hahaha. Comment of the year! Anyway, yes. I believe if you were close enough to the mouse and shot it enough times then it would most definitely die.

[0BluexKoolaid0]

@verfugbarkite we actually have tested and can confirm that this gun will demolish any sort of small animal

[KingBalisong]

@KingBalisong oh nvm ofc it has a locking slide lol

[KingBalisong]

Locking slide?

[YATairsoft]

@KingBalisong yes sir

[liznb0125]

where did you get the threaded barrel? is it CW or CCW?

[YATairsoft]

@liznb0125 From shortyusa and it is CW

[Sjark92]

how many bbs can you shoot with one co2 cartridge?

[Sjark92]

@Sjark92 nvm, about 50 total shots, I know now .xD

[legvetsolo19908]

what size BB?

[MrJmak223]

What make is the threaded barrel? Also do you think any of the metal parts are likely to break with C02, and do you know whether any marui M9 parts will work with this gun?

[0BluexKoolaid0]

@MrJmak223 im pretty sure the marui parts are compatible, not sure though. and this gun is a tank. theres no way that this will break on you from pure use.

[DZgoodTimes]

where do you put the co2 tube?

[YATairsoft]

@DZgoodTimes In the magazine

[j50grt]

whts the fps

[PXPGamingHD]

@j50grt 350-400Fps

[j50grt]

can u give me a alink for the gun and co2 mad tht comes with it

[mrkiky]

I'm thinking of getting this. 2 questions: is the trigger and the hammer also metal? and how many shots do you get out of a co2 cartridge?

[YATairsoft]

@mrkiky Hammer, trigger, everything; it's all metal. The co2 holds up for 2+ magazines, about 50 total shots.

[AXOAIRSOFT]

My dad has a m9 and i just want one so i can say i have a m9 haha

[nwall989898]

"Im just going to be shooting at nothing" *Shoots gun*...*distant scream* lol

[caronliner24]

and how to insert/remove the co2 cartridge?

[caronliner24]

is it compatible with the co2 mag(green gas version)with out any modification?n it wont damage the gun it self right?

[caronliner24]

hey i am interested to buy this weapon.n i want to ask.if i buy the green gas version..will it work if i use the co2 mag?since i want to purchase 1 extra mag.

[YATairsoft]

@caronliner24 KJW's website says all of their pistols are co2 compatible as long as you buy the co2 mag. What makes it co2 compatible is the air nozzle. What kjw does is add a colored nozzle (either red or blue) to their pistols, signifying that it is co2 ready. If your pistol does not have this colored nozzle (or the gun is plastic), then it cannot take co2.

[caronliner24]

@YATairsoft okay.cool.so its ok for me to buy the green gas version n also buy additional co2 mag?is it safe for da gun?n how many fps will it be if i use the co2?the green gas is arround 330-350 right?

[YATairsoft]

@caronliner24 Green gas will never shoot 330-350fps. Youll be lucky to get anything over 300. CO2 will make the pistol shoot around 350. Like I already said, KJW does not make a green gas designated pistol; they are all upgraded for co2. Some distributors may remove the co2 air nozzle and sell it as an aftermarket part to make money. If so, you will be receiving a gun with a black air nozzle made for green gas. If you somehow manage to find a greengas only version then, no, it will not take co2.

[caronliner24]

@YATairsoft oo ic.thx for da info.n tell me if yer pistol grip is just cheap rough plastic or its rubbered?or atleast good quality plastic?n will it break the gun if i use a glass/aluminum/cooper BB'S?

[YATairsoft]

@caronliner24 It's just a plastic grip with some rubber texture around the edges that comes off kind of easily. Metal bb's? i've never tried them but i've heard about them. I don't see why they would damage the gun as long as they are the right size and not too heavy. On another note, it's completely illegal to use bb's made of anything other than plastic when you're playing on registered fields.

[caronliner24]

@YATairsoft oo ic.thanks for da info.u got fb btw?i am jonathan.from indonesia.newbie in airsoft.haha.n btw i use the metallic bb for safety.cuz in indonesia.its hard to get a gun license.and it cost very" expensive.haha

[aznkid666888]

This is exactly the one I was looking for, a CO2 M9 with blow back. Nice review

[bennyscot27]

rubberwised