Added: 4 years ago
From: SSSTang
Views: 28,962
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (71)

Sign In or Sign Up now to post a comment!
  • how much does it cost to buy it and install it?

  • can you not drive in the rain? that intake looks really exposed

  • Did all that just so you could get around those insurance companies ?? Lmao... !

  • no way you're getting 750 out of a 3.8 porsche's new 911 has a 3.6 that puts out 630, and thats at like 24 psi with a 50 thousand dollar motor, i love my 3.8 but the most it could put out is 450

  • no way you're getting 750 out of a 3.8 porsche's new 911 has a 3.6 that puts out 630, and thats at like 24 psi with a 50 thousand dollar motor, i love my 3.8 but the most it could put out is 450

  • @BeastV6Stang , turbo.

  • wat all did yu have to buy to do this cuz i wanna do it to my 95 3.8

  • Are you people serious? Is everyone still bitching about the whole V6 & V8 debate? Why don't everyone just quit their bitching a move on with your life's? It's not your car, so it's not your decision. Let people do what they want to their car. I really don't understand why are people so concerned about what other people do to their own cars. Let it go people.

  • @SilverStang7190 FORD supercharged the 3.8 V6 you get in 'stangs

  • man some people are stupid, didn't see anybody complaining when buick turbo charged their v6,there are some turbo 4 cyl and 6cyl engines supped up that will put v8's to shame.where's the fun in not building your own powerhouse motor.

  • y couldnt u just get a REAGULAR v8 DUMBASS

  • @bayboss88 well money is not always consistent so maybe by the time he had the money for a v8 it it would cost him less to supercharge his v6 dunno if that sounds right but something along those lines i got a v6 but am saving for the new 5.0!!! ahh so excited

  • hey those hod pins are they teh real ones or the glued ones

  • haha look how shitty ur hood fits. ghetto aftermarket crap. if it looks this bad in the video imagine in person.

  • Comment removed

  • Because the kit only cost me 1,100$ used, and I ran it at 12psi before I finally sold it. It's only within 20rwhp of the procharger kits at the same boost level. Your making 753hp out of a v6 mustang?? What setup do you have going.

  • I've also switched from s/c, and have a built forged stroker motor. But for now I'm calling bs on the 753/503.

  • also man check JS v2 twin turbo rouch,it as a very similar set up,is making at 611hp with a 4.3L stroker

  • @SSSTang 1,100 could have gotten you a GT.

  • supersixmotorsports sells a P/P manifold and cylidner head pack which does 70 horse for like 1750 i think it is, these engines have so much room to grow before you even need to bother with an SC

  • @adonnis010983 your A fucking idiot...Even if you do bore a 3.8 ford to its maximum potential and forge pistons with twin super charger and the baddest intake and heads fuel rails/injectors and heads that engine will only put out a max of 650 ponies with nos...It would have ridiculous torque.

  • wat is tht knocking noise...wat hppnd lol

  • The stupid idler and my crank pulley were having fun eating each other.... I haven't had the vortech on my car in forever maybe I should make a new video lmao!!

  • 270 and whats the mpg, probably amazing

  • is it just my or do i here some kind of knocking

  • I think that knocking is your honda you left running outside trying to throw a rod :p

  • nice, but aren't you going to have hydro-lock issues since the air intake filter is so exposed? if you run that car in any kind of water and it sucks it up, that engine is done.

  • No offence, but this makes what? 250 hp at 14psi?

  • 270 RWHP @ 8 PSI. Which is 320-330 HP

  • Those V1's are LOUD!...

  • i love the way the engine looks and it probably runs good as well. but it doesn't some that great like it has a knocking sound

  • how many hores does it run?

  • about 200

  • *stock

  • Vortech is fine. But I don't want to have to tap my oil pan for cooling. Plus pushing anything past 6 psi will put alot of pressure on the internals. A forged upgrade or stroker kit is 2-3k. Cudos on your run. It sounds well timed. I love the look on peoples face when you woop their ass and they have a v8.

  • But...its a v6...

  • which means less weight so it would have a better launch than a stock v8. 6cyl are not that bad of an engine. Less weight equals better mpg and more power. Power to weight ratio.

  • then why did you come here in the first place

  • Sweet!

  • how much did it cost to get that done?

  • where did you get that s/c? and air plenum?

  • nice but im not digging the hood

  • I wont lie i'm not digging the entire body kit any more haha

  • personaly, as for as supercharging v6 mustangs, I'd look at steeda first.

  • its not hard to install the vorteck your self

    nice car your pushing about 250 rwhp right

  • how much HP you pushing

  • nice hood

  • I wonder how that engine plus the supercharger compares to the 5.0 V8 in terms of power to weight ratio.

  • thats a pro charger aint it

  • Vortech

  • how much is a supercharger + installment??? i wanna get my baby supertized as well! anyone?

  • depends on what kind of supercharger you get. you'll probably need a tune as well, and some other parts.....so you're lookin at around $5,000 if u wanna do it right.

  • hmmm sweet I'll look into it then, I need to make my baby faster then it'll be known as the super6 stang lol thanks man

  • rofl, looks first, 1/4th et last. i like the color honey. I'll spank the et this weekend. 8.8 tlok and aluminum drive shaft =)

  • nice work on the engine, im running 235, the only thing im missing is the supercharger , how much u paid for it installed and everything

  • Hey man I'm rollin wit the same car. That's a great option for power. I just wanna know what u paid for it?

  • is a supercharger real safe on a stock motor? what kind of power did it put out?

  • Yes its safe with a tune. 6psi 255rwhp/276rwtq.

  • would you be able to bump up the psi and get more power by putting in a bigger cam?

  • Yes, working on that now.

  • Vortech v1-s trim

  • Added to faves...

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more