WireMod Essentials [Ep. 07] - Automatic Turret TUTORIAL

[bmxxbogy]

What do you do about City Scanners that have their origin on top of them?

[Drillproduction]

Help plz, when i create everything like on the scheme, it just rotates like crazy, and don't even point at target?

[TakeBackTheWorld]

@Drillproduction

This question is too vague. I cannot help you. You could try checking all of your wire gates to make sure you didn't forget to wire something.

[Acodin144]

@TakeBackTheWorld I think this tutorial is outdated. My wiremod doesnt allow me to use some options,

for ex: G. Comp. Gtr than -> GPS

Or maybe I am doing something wrong.

I use Adv wireing tool, and this expld option is blanked, but when I use basic wireing tool I can wire GPS and Gtr than but it will pop out a problem.

[TakeBackTheWorld]

@Acodin144

..Well, yeah, considering this video is a year old now.

[majami1234]

@TakeBackTheWorld The tutorial is good. Problem is that vector truster must be on xyz world and then it will stop rotating.

[Rodentsnipe]

I failed With replying xD

[Rodentsnipe]

@Take back the world I just read your comment about 2 weeks later and i found out what went wrong 5 minutes after i wrote it. But anyway thank you for being so helpful and keep up with the great vids. :)

[Rodentsnipe]

I made this and it was perfectly fine, then when I adv dupe it and pasted it it just shot upwards D: help pls

[TakeBackTheWorld]

@Rodentsnipe

Adv Dupe un-wires any A [TYPE] (String, Vector, Entity, etc) input, so you'll need to re-wire all your A [TYPE] gates.

[SC18Metrounit]

Uhm, You might not read this anyomore, But. I want the turret to stop shooting when it neutralized its tango. So, Ranger? Or else?

[SC18Metrounit]

@SC18Metrounit And my turret is not steady....

[DylanvHamburg]

My turret only shoots up instead of shooting on the enemy, whats with this? I did everything exacly as you did

[BojaDrawing]

can you make it so that it dose not attack the player?

[TakeBackTheWorld]

@BojaDrawing

Yes.

Two ways, actually... if you don't want it to attack ANY players, make sure "Target players" is unchecked in the Target Finder options

OR, if you don't want ti to attack just YOU, make sure "Target Owner" is unchecked

[dragonshardz]

How do you set the turret to ONLY target NPCs?

[watermonsters]

The weight tool doesn't work! How do you put it up? Do you have to extract specific files to other specific files?

[00Discourse00]

This is SO fucking irritating, although great, thanks.

[darthtater888]

8:43 silly kreed :p

[oromis107]

This is a great video, I'm glad I watched it. I was trying to make a target finding missile without any vector values and just target finders and beacon sensors, and now that this video introduced me to VECTOR, I have a feeling I'll be making some great stuff :D

[TakeBackTheWorld]

@boyrockfreak325

@marsterchife

The beams are PHX specialized construction props. The grid is Smart Snap

[marsterchife]

what pack is the Beam's On ??

[AttemptsNotMade]

well i did everything you just wired on the turret, but when i finished, the targeting system clearly works (as when i get close, it starts...moving), but the problem is that it doesnt just hold one end aiming at me; it just flails all over the place if i get in range. help please?

[megamarianofull]

My wiremod dosent has that kind of things

I dnt have vector gate, not other type of GPSs and various things if u can just respond someone with the link of the wiremod version is he using

[pahvi67]

I got it to work perfectly, but when I duplicate it it just shoots up to the sky ?

[TakeBackTheWorld]

@pahvi67

Oh. Yeah. I have that problem. You just need to rewire all the "A [ VECTOR ]" inputs to the correct locations

[joblo1511151]

What do you wire A of the greater than to what output on the beacon sensor?

[Annile12]

Ah... I saved this thing but when I loaded it the arm flew away to the center of the map and started spinning and a few of the wire components seem to get scattered. Please help!

[TakeBackTheWorld]

@Annile12

Sounds like the ballsocket failed to create. This is normal behaviour, just make sure you spawn it frozen.

[Annile12]

@TakeBackTheWorld Nope. It worked fine at first, but when I saved and reloaded, it glitched.

[windson7]

The part with the constant value, i DONT understand. I got Value 1 and under it Value (to write something in) and Type (Angle, Number, String, 3D vector, 2D vector and 4D vector). which settings do I choose?

[h3lgi2k]

i cant wire A from the new vsctor subtraction to the old one, any advise?

[TheDrummerJ]

Hey man i was wondering if there was a way to make it so umm, say your online and u make something to make the target finder not target people you have selected? sorry if you dont understand me...

[wishihadaname94]

NVM figured it out..the thrust's thrust was really low..

great vid

[wishihadaname94]

When i make a turret that locks on to a target, it tends to wobble around as its locking on, anyway to get rid of that?

[Ktwonnn]

way professional 

[MaggieMovies]

Doesn't work for me...

No idea why it just doesn't

The turret arm goes nuts

[TakeBackTheWorld]

@MaggieMovies Make sure the Vector Thruster is set to XYZ World instead of XYZ local

[joblo1511151]

@TakeBackTheWorld How do you know which one it is set to :/?

[TakeBackTheWorld]

@joblo1511151

XYZ World/Local is a drop-down menu option at the bottom

[SwanArt1]

WOW at first i thought was another lame tutorial sires that i had to sit though. But to my surprise it was great! You made everything really easy. Please don't let this be your last one, this is the best wire tutorials on here.

[TakeBackTheWorld]

@SwanArt1 It's good to have some positive input. This isn't the last video, the next one is a missle. Stay tuned and thanks for watching!

[LokiTheDalek]

Great Job mate.