Airsoft Mp5 Take-Down/Disassembly Guide (EVIKE.COM)

[AirsoftAnarchy1]

what do u use to get the selector switch off

[RustedMind34]

"Do not break the rubber." Giggity.

[12Janar12]

with g&g mp5 u only have to take two pins out to take gun appart and i doesnt have metal body.

[SEALboy98]

its always the simplest ways that seem complex, got out the barrel on my own. how? no bolts, no screws, nothing. i just tugged a little bit on that plastic piece that adjusts the hop-up connected to the advanced hop-up system and the whole barrel came out. i didnt do this at first because i considered the piece to fragile and at risk of bending/tearing. ill make a video for those of us who spent the extra dollar to buy American, buy metal, and buy the J stock

[SEALboy98]

wow it only takes 3 simple push pin removals to take out the gearbox for the Echo1 MP5A5 (MK5A5). everything is so much simpler and faster with my version. the only problem i have is the most important one, im replacing the 6.08mm barrel with a 6.01mm MadBull and i cant find any screws or pushpins to remove the original barrel and hop-up so i can make the swap and youtube and google arent helping me. please help me if you can

[prayingmantis619]

ma friend got this gun cuz we are havin a war hes making me nervus cuz im using the pulse r71 ):

[BSfanboy113]

this really didnt help me at all...I have the echo1 full metal mp5 sd6 :/

[chinopino7]

@BSfanboy113 i just changed out the spring on my ICS MP5SD6. let me know if you want my suggestions

[UrbanLegendsAirsoft]

THANK YOU

[williamcrisman1]

what thay dont tell u is there is 2 more screws in the motor caseing



[Gizmatic23]

what about a retractable stock?? mine broke n i needa replace it but i dont wanna break stuff on it haha

[Arekkusu723]

So you're telling me I need to do this just to put in a tight bore barrel. I knew I should have stuck with my M4 -.-

[Daodoc]

Can you reconnect the wires for the gearbox and the motor after you disassemble it?

[rmr1197]

would this be the same for the jg?

[AZharshairsoft]

can i skip some steps of i just want to install a tight bore?

[andrewsampson24]

Why would u want to do that any ways

[DannyBoy465]

I have split the upper and I can't get the gearbox to let go of the hop up

[IdahoAirsofters]

Omg thank u so much I was stuck for like 30 min

[hibbitybibbity755]

Where the HELL can I find a screwdriver small enough to unscrew the selector switch? I even went to the local eyeglass store and got an eyeglass repair kit and even THOSE screwdrivers are too big..WTF >.<

[jagerdager07]

@hibbitybibbity755 you can use a normal size screw driver it works just try it unless your screwdriver is f'ed 

[guitar1309]

i think my lower receiver is glued to the gun, like the flash hider... except i cant break the receiver off like the flash hider.

[ThumbsxUpx]

Is the gearbox shell metal or plastic...anybody know? Thanks.

[mudcatred]

whats the violin in the background as you're taking it apart?

[vlogidy]

Will this work with the ICS MP5 SD5?

[B00B0P]

I took mine apart to see what was wrong because mine just stopped working in general (and it wasn't the battery i'm sure), and put it back together hoping that it would do something. It's running now, BUT it's not shooting. All i can hear is the motor moving but it doesn't make the actual shooting sound, can someone help?

[dapa4]

This is why the ICS mp5a4 trumps all else.

[PAINTBALLis4flamers]

can i take out the motor plate if i just want to upgrade the motor? and what motor would you suggest?

[xDemonfire]

I can not for my life find the other screws to take out to remove the lower reciever

[nerfcreations]

utg mp5



[FractureTheBand]

Found that allen wrench.. But the 2 screws near the hop up selector, is covered by this big plastic ring that was part of my rail system.. I can't take it off, and I've unscrewed everything

[FractureTheBand]

Omg, wth! The allen wrench on the fire selector is like 1/32nd of an inch, I don't have that!

[Chicken2341]

Awesome, Thanks a ton. I was able to get my gun up and running again.

[SpanishxJake]

youre a twat

[DjIsotope]

Can you make a tutorial on how to take apart the hop up and install a tightbore?

[albertobebes]

I like cheese!

[oneshotonekill1996]

i cannot take off my lower reciever and ive done everything!!!!!!!!!

+

[SatriaOren]

like this video....

[bloodshot16]

Urgh mine is completely different to this

[SHWELL11]

So, this has to be done to work on the hop up as well? I need to fix some hop up issues but hate the fct that I have to do surgery to do so.. Great vid man.

[PyRoAmateur]

ah yes...its a BITCH to unjam an Mp5 for this reason!

[MuktownSniper]

I just took apart this gun, it's gearbox and reassembled it...

...yeah I hate MP5s now >:(

[YOUGOTTHATRIGHT5447]

holy crap lol i have that gun but the metal version it s simple remove the motor this pin the stock and boom you can just pull the gun apart and put it together in snap lol

[Gavinman93]

thank you so much this and the gear box vid helped me sooo much thanks again

[Zescaflowne]

these a holes dont' put airsoft in the title just so they can get more views. i'll bet 90% of the ppl that accidently watched this video was mislead here.

[Sonytube12345]

Pisses me off how you airsoft guys NEVER put airsoft in the title so everyone else ends up watching a vid on a toy..

[Wubbyrox]

i have a cyma mp5 and it broke the first day in a battle it will swick to semi/full auto but the safety will not unningage please help/post a video and give me the link please!!!

[pointless1194]

i have a jg mp5sd6 is it possible to rewire the battery to the front of the gun and place a folding stock on the back?

[TheTopHatNinja]

funnily enough im gunna try thaty this week with my MP5A4 (this gun in the video), it you look when you take the handgrip off (if you can with your SD6 versoion) theres a small hole the exsact size of the wires that connect the gun to the battery, so im going to try it, im going to try and convert it to a small battery as mine is large and wont fit in the handgrip, so ill message you with the results

[Stinkeyfeet678]

yes

[schurkz0r]

Please put airsoft in the title next time when it's about a toy gun.

[cmabeast]

i have a question. the other day my gun started making a winding noise so i lubbed it. it didnt do anything. would it make sense to say a gear is loose or something?

[AirsoftxAssasin]

*lubed

[cqb22]

i would highly suggest a broken piston or your motor is not synced with your gears, as gears rarely come lose if they are shimmed correctly

[JoskelkatProductions]

They completely left out the part where you have to go into the handle and remove two screws holding the inner plate. If you have done everything and cant figure out why the grip and lower receiver arent seperating from upper, that is probably your best bet.

[SEALTEAMxxReapers]

Ok I got down to the removing of the lower receiver but it will not come down and out. Any tips or whats wrong?

[lilchuckn0rris]

looks like a bitch to take apart and put back together

[TheAirsoftReviewer1]

It is up there with the m14 for sure.

[mohsoldier2]

@lilchuckn0rris not really. I don't have a lot of experience taking apart the MP5 but hell, it's pretty easy as long as you don't lose the screws

[bad408notch]

I noticed this has the black gearbox in it,my question is I just bought one of these about a month ago and mine has the silver one,what is the difference between the tw?thanks

[quaidman13]

ok i removed all that u did but the lower reciever will not come off. what do i do?

[TheAirsoftReviewer1]

Did you remove the screws in the grip?

[quaidman13]

what part of the grip? i took out the mag release. the pin below the magazine release, the selector switch, the stock , and the motor

[TheAirsoftReviewer1]

look into the grip

[quaidman13]

oh ok where u take the motor out is it easy to reassebmble?

[eatmepeaches]

@TheAirsoftReviewer1

I was having the exact same problem, didn't notice the screws inside of the grip, solved the issue. Thanks!

[quaidman13]

one more thing u say when u take the lower reciever off a little piece falls out what is it and how do u put it back on

?

[ajsnuker]

is this like a JG or E1?

[TheAirsoftReviewer1]

Its an E1 so it has a plastic body.

[ajsnuker]

yeah, in the description it says metal bodied ones are easier, so i assumed it was a plastic one, and i don't know of any beside CA sportlines, E1's and Jg's off the top of my head

[TheAirsoftReviewer1]

Yea, All you have to do with metal bodies you just have to remove the stock and then the body pin and then the motor and you are done.

[ajsnuker]

really? wow that is much easier. ICS mp5's have metal bodies, right? ever since the "pistol" i have been drawn to ICS very much so, by the way the box it came in surpasses boxes i've gotten real guns in. I love the easy upgradeability even though that isnt a word =P. Are the Mp5's split gearboxes on the ICS's as well?

[TheAirsoftReviewer1]

Thats great man. Not sure on the Gearbox of the ICS but I think it is just a normal V.2.

[ajsnuker]

yeah, i kinda wrote alot. they're expensive though, and that's a shame, i kindof thought they were just a normal v.2 though. 250 is a little too much for me though, i gotta get a truck soon so...yeah...

[ariana19941993]

Thanks! another great video

[angrymuffin123]

nice video