How to: The ULTIMATE Nerf Nitefinder Mod Tutorial (Size Reduction, Air Restrictor, Spring Mod)

[SuperDeadlyscorpion]

i did it and it works but it is louder than before when you shot

it is probably about 5 times stronger once you have done the udgrade(i didn't cut anything of)

[HelloLouke]

Hey Drac would it be possible to replace the red led with a super bright white led.. than rewire it to a on/off switch?

[AutoJunkieMan]

I think the reduction is a good idea, but the additional ammo slots on the bottom really helped the gun be viable.. Maybe theres a rail solution or maybe a mod to add ammo holders to it?

[joebrick23]

Love what you did,,,but if you r reading this....all the guns you modify you should double the spring acting...and i bet you it would go even faster and more disance!!! :) :)

[gdgdgdgdist]

thumbs up if you added a second night finder spring

[0BirdEye0]

Ill buy it off you x.x

[kingkong11256]

but add a nice paint job to go with it

[kingkong11256]

you should try making a stampede and vulcan intigration

[Fudgemandude]

Ok i wanna do a mod on the crappy light for this by replacing the leds with some better brighter ones is this possible? Someone answer please.

[MrPandaGamer]

@Fudgemandude Possible, yet not ideal, its simply just take out old LEDs, then solder in new ones, but lights don't increase accuracy.

[MW3Sly4]

im just asking where was the spring mod?

[yahdboy]

how did you get that end piece off so easily? mine was glued on

[xXm33masterBadXx]

@yahdboy

You have to soak that part in boiling water for a while to break the adheisive bond. Then finnally pull apart.

[Thidmos]

@xXm33masterBadXx you bastard, this melted my gun!!!

[Knightman963]

I just wanted to remove the part where they hold the extra ammo lol

[proton468]

how do you break the seal of the plunger tube

[techdeck628]

Hey Drac, please check out @keylobe 's minimized nerf nitefinder and how he sealed his gap, he did a very nice job on the sealing of the gap and you should give it a try :)

[techdeck628]

Hi Drac, can you please make a tutorial video on how you seal the gaps?

[Nerfmods4ever]

Omg you all have New Blasters simply rip the barrel in half then glue it back together you guys know this! Modding the nite finder is easy Just think it out!

[nerfguyofnerfgrid]

you can't take the light out of a nitefider!! Thats why it's called a NITE finder!!!

[techdeck465]

just finished modding my nite finder, thanks a lot!!

[EpicMrMax]

If it is glued simply cut behind the air restrictor take it out and superglue it together

[fourthofclubs]

This helped me make the best BB gun!

[ALPHAdog479]

im glad your on youtube because i get to look smart when i mod my friends nerf blasters.

and im pretty young

[XxcaitybeexX]

my nerf wont let me remove the air resricter

[Bcuzieatiron]

my barrel components are glued together and don't come apart. I tried soaking them under some hot water but they still aren't moving. The last one i tried this on i pulled them apart and they snapped in half and now it's just fucked up. So I don't want to just pull on it. Any ideas?

[famlyfun747]

hey drack if you don't like the laser you can take off the battery cover and store darts

[munchingapple1]

@famlyfun747 thatsss whhatt i diid

[awesome9COOL]

do you know anything that sells trigger catch springs for the nite finder

[qweqpo4224]

i did all these mods, even the size reduction. all i had to use was a dremel so it was really hard but it turned out great. for some reason, the way i did my size reduction there was no trigger guard and the plunger tube is showing but it looks cool that way

[iGiomani]

I just had a go at this to find that the AR section was all glued together from factory. :(

[Sammy15087]

thumbs up if you wish you were 18.

[flamingfoxable]

your vids are so cool can u please make a vulcan mod video if you can

[TheFriend13579]

you should try using a buss bee dart on a regular nitefinder it works better than a nerf dart

[KOBEEY24]

cool man!!!

[TruthIsToBlame]

V''''''''V

[mootroidXproductions]

i have the same "hobby knife."

yeah.

i don't care, much.

[IHaveAUsernameN00b]

Why did you not do a spring and barrel replacement?

[IHaveAUsernameN00b]

i haven't seen anyone do this yet but instead of taking out the stupid light why couldn't you just mount a laser pointer or other bright light such as a wide angel LED (which you just have to replace the bulb that is already in there)and add a more clear lens?

[MrCatD8T]

just stretch the spring its fast and simple and it will hurt like hell

[TheKchip1]

wuts the spring mod

[ajaymora10]

my nite findfers air restrictor is glued

[ajaymora10]

@ajaymora10 but i still modded the air restrictors

[Kylex671]

oh crap the nerf N-Strike nite finder I modded like what you have done. The power was amazing it's ranges about 60 to 80 feet when Stream line and Sonic Micro darts are used, and I also change the spring to a more powerful and durable spring, but all in all my mom won't let me fire it to any ones face. Thank you rock. VvvvV

[TheKchip1]

@Kylex671 its V''''''''''V

[Mw3xHoOd]

lol i just pulled and it came out

[Bisby219]

My nitefinder barrel won't come apart. What do i do? please answer!

[Diansonic]

@Bisby219 you have ti take a knife and kinda wiggle it in the like groove thigns then snap it open, it'll feel like you broke it but its fine

[famlyfun747]

@Bisby219 grind off the tip and get force ups to take out the peg it works check out my how to mod a nerf element video it will describe it better

[PeckertheSneck]

thankss



[Bisby219]

I think the people at Nerf/Hasbro said... "how can we make a nerf gun thats cool looking, has a freakin' laser and is awesome to mod..." three months later, the nerf nitefinder came to the market!

[gdgdgdgdist]

@Bisby219 then the deplo came out and recon

[Bisby219]

@gdgdgdgdist You're right! But the Nitefinder was the first of its kind.

[gdgdgdgdist]

@Bisby219 sory i ment deploy

[nathanOsIrEs169]

your videos have helped me very much i am getting a nerf gun for christmas and thanks to your videos i shall be able to mod it with no problems thanks :DD

[MrFredwins]

What does the AR spring even do?

[IsaacS2280]

@MrFredwins Restrict the air?

[MrFredwins]

@IsaacS2280 Yer, But How

[figzig1213]

how do i fit evrything(internals) else bck in there after the cut?

[coolnash100]

one of my fucking srew wont come out

[MrShug99]

who is filming this

[AKnervids]

Hey Drac, Just wanted to ask if you would make a ultimate vulcan mod tutorial. is it i even worth modding, if so please respond.

[gdgdgdgdist]

@AKnervids i think the olny mod is to do a voltdge mod

[KnockoutComix]

@AKnervids The AR is in the dart belt. Just drill out the bottom of the belt. That's the simplest mod I know for it, but i don't know anything about voltage.

[vinnierocks12]

THANKS SOOOO MUCH I MADE A RED MARK ON MY BROTHERS FACE

(i got in trouble)

[NerfWarzElite117]

@vinnierocks12 .......nice job...........

[gdgdgdgdist]

@vinnierocks12 mine will go through cardstock paper and leave a red mark on someone's body with modded dart with hot glue in the tip

[xitzlilluigi]

u make me brake my nitefinder and my longshot......

[munchingapple1]

@xitzlilluigi just because you did it wrong

[UxDarkGhostxU]

@xitzlilluigi No he didn't.

[P0531D0NPR0DUC710NS]

ThxThxThx!!!! :D now it's awsome!!

[awesome9COOL]

you have made my gun EPIC!!! so thanks

[nerfassassindanski]

There was no spring mod

[hardcoregamer82]

v'''''v

[DancingGophers]

dude u r filming from the shitist angle

[Lordraconical]

i just got my first 2 nightfinders they rock with your mods

[REGRIGBY5678]

how do you get the barrel to come appart

[awesome9COOL]

@REGRIGBY5678 you just sort of pull it and it breaks apart , be rough with it.

hoped that help (but it probably didn't)

[kartoonkid101]

my chamber is glued together. what do i do?

[xXQuinnbo117]

@kartoonkid101 put it in boiling water for a little bit... thats what i do!

-Quinnbo

[kartoonkid101]

@xXQuinnbo117 for how long roughly? my parents dont let me buy anymore blasters so i dont want to melt it

[xXQuinnbo117]

@kartoonkid101 well i guess 1 minute but do it with water that you can touch the heat without burning your self

[kartoonkid101]

@xXQuinnbo117 thanks a bunch

[mrawesomeapples12345]

I have a question about the mod. Would I have to take out the thing that used to hold the air restrictor in? if you dont know what I mean in your ultimate mod guide for the element you cut it out to get a clean shot down

[Nerfmodkid315]

mine wennt off randomly

[bruticus1000]

wheres the spring mod

[TheBamaBassist]

Personally, I like the "laser" sight simply because of the Desert Eagle-like feel to the end of the barrel. Are there any alternative mods that use the section of the gun that you removed?

[yoyoairsoft1411564]

hey guys can i put a longshot and the original spring in my nitefinder with a extended plunger ( 2 plungers)

[callumjosh10000]

use homedeepo 25pound load spring and cut it

[engnerf]

Thanks drac for helping me fix my nightfinder I called mine the big barrel blast

[Angrychimp345]

Thx I did this!

[MrFINGERLICIOUS]

@bobajobist how?



[pizzarune5]

@lorddraconical hey mine won't break at 3:08 any suggestions?

[seniornuggtes]

@pizzarune5 you have a newer one where they glued all the parts down,either cut them apart and glu them back together or think of somethihng else,thats all i no

[Kdj1996]

Dude I added a spring and did your mods...

60 ft thanks!

[TheFvbproductions]

Can you strech the spring for it

[MrJonothegreat]

what, no spring mod, but it was still a great vid, thanks

[SuperWilsonben]

this helped my night finder so much i get 50 feet

[blueace115]

@bobajobist how..teach me



[MrPheonex]

you didnt do a spring addition

[sbrod002]

@MrPheonex

i think its supposed to be a simple mod, for people who are new to modding, (moding?) so, he could have but some people would have gotten confused

[fear2max]

its loud is it possible to make it a little bit softer ????

[dynamicpaintball]

@fear2max pad the plunder. and it'll be quieter

[crazymonkey7651]

my air restrictor part is stuck together meaning i cant get it out i can only cut off the spike what do i do?

[crazymonkey7651]

does the size reduction make it go further?

[nerferAnonymous]

me and my mate did this mod and we made his little bro cry its mad

[zickerman20]

I don't see the use of removing the light thing. No offence but it's the specialty of nitefinder. Removing it will, I guess, not be that impressive.

[TheSkillzClanx]

How do you renforce the chectch and would a longshot attackment gun spring be a good one to put in the nitefinder?

[shadowguard60]

7 people were shot by Drac's awesome blasters:)

[mrsfingerboard1]

3:08 my didn't :-(

[sebklopfer]

Mate, just drill through the thing

[masterchiefb11]

what was the diameter of the spring

[MineCraftTNT1]

where was the spring mod?

[lockeboy14]

your mods are amazing

[lockeboy14]

your mods ae amazing

[domination3617]

@rainfred11 don't blame it on him cuz ur too retarded to mod the simplest gun in nerf history notice everyone here has done it correctly besides u

[NerfSpartanKeo]

@domination3617 Agreed completely, not only that but he chose to open it up and mess with it. Drac is just showing how to do it correctly, in fact if it weren't for his modding tutorials, I never would've fully understood how to mod the Maverick and Spectre. (I watch many how to videos and even replay them before modding if i've never done that gun or one like it.)

[nerflover425]

I like the laser pointer because i was out of ammo once and i blinded my opponent for a second and found a dart and shot him

[Halstevers]

is it weird that i only have a nitefinder plunger head

[turboXcrisis]

i think the newer version of the nite finder,the air restrictor is glued together and it cant be taken out :(

[UUXmafia83]

can we tke of that piece of  air system pullunger at 4:22

[Halstevers]

@UUXmafia83 yes

[SaxtonKale]

rainfree11 we get it you just have to post it once

[rainfred11]

i broke my Nerf gun because of you

[rainfred11]

i broke my nerf gun because of you

[rainfred11]

i broke my nerf gun because of you 

[trent1097sfriend]

I'm thinking of removing the air restrictor, size reduction, and putting craft foam on the plunger. Could I put a k26 spring into this, and not ruin it?

[LordReconical]

this video really helped me alot with my nitefinder. My gun shoots 73ft. 4 in. max, and i also did a little paintjob (tiger camo) blu and black!

[savyor23q]

Thanx man i modified my nite finder with your help its now faster than ever

[paperninja370]

Dude your vids are awesome THANXS ! Subscribe

[XxBUTTERCUPxX100]

That dumbass he completely missed the other air restrictor

[Dopekid94808]

I dont get it bout the barrel glued on how much does it restrict to mid this gun

[idearyou89]

youre vids are cool

[SexyFred09]

@doctorklockwork you don't you just drill it out

[doctorklockwork]

The new Nite Finders have glued barrels. I tried boiling the barrel, but that just warped it. How do I open the barrel without damaging it?

[IROCK3556]

can u just drill right through to get the AR removed?

[HarisonHopwood]

@IROCK3556 It is possible, but it is far more efficient and clean to remove it by cutting the 3 tabs holding it in inside the plunger housing. Since its a direct plunger you can cut those tabs to remove the AR completely just like a longshot AR removal.

[SuperTangi123]

thankz mate i modded my nerf nitefinder now it shoots upto 35 ft loner than it uasually would,

[MrWogboy2011]

Could I have a full mod nite finder with all the springs and black and gold paint

[SensHockeyfan18]

i love you, no homo.

btw for anyone wanning to get a bit more power and elastics on the cocking device and attach them to the front of the gun to produce more power.

[TIPPMANNPAINTBALL100]

its a scroll saw dummy

[jordow1998]

How did u take out the thing on the barrel. I can't figure out how

[jordow1998]

I'm trying this mod as the vid plays

[TanimotoNatsu]

I super glue one of those ammo holder from the front of another Nitefinder, to the bottom battery holders.

[lopside13]

wire detaching fail!

[TheOrigami912]

wow! mine goes 40 ft.!!!!! thx

[fgfsfehgghgdhg]

i boiled mine and it didnt come off

[BlackHatZane]

I always wondered why your videos had such awesome quality... CAMERAMAN!!!

[tommey5497]

my barrels glued shut

[9016potter]

where the resister is it wont come apart

[AnNILEator12]

weres the spring mod?

[Vissan99]

i just thougth id add this if you dont like the orange plunger bit u see through the shell i just got some colored tape and put that there so its blue now

[RockLeone22]

huh?mine shoots 35 feet - 40 feet stock!

[TheLilevan]

mine is really loud for some reason after modding. and also should i minimize a delploy by cutting the stock off and the handle part off too? thx plz reply :)

[fishyfish2656]

@JoeHazAnXbox carefully cut the seal with a small knife

[6Scorcher6]

my nitefinder can hold 9 darts because i split the dart holders in halfs and hot-glued the holders to the side of the gun,and remove the electronics then add another dart holder there. thats how i get the nitefinder EX-9 :D

[XxPrEdAtOrZz101]

When i got my Nitefinder i shot it and it got 64 FT STOCK!!!!!!! But now the ranges have dropped a bit

[TheJoester2000]

you should do spring combos or replacements

[TheLilevan]

how would u do u the size reduction with out a table saw but with one of those hand saws? would it work? and ur awesome btw i get alot of mod ideas from u haha.

[patrickd126]

this is a great vid, but how long does one last. I bought mine and modded it and i just want to know if it will break really easliy

[TheGameFilmGuruMan]

I did this (kind of). I added an airsoft gun spring (or rather part of one) INSIDE the factory spring. I also took out the air restricters. It shoots about 100 feet.

[WCStheV]

awesome i did it and it worked ! thanks

[TysiPhoneHelp360]

what categories are the springs in on the website.

[TysiPhoneHelp360]

what is the name of the home depot spring? Because I need the exact same spring.

[minerdave01]

this must be an earlier model, the one i bought today the barrel was glued solid, thankfully it was just a simple case of taking a powerdrill with a drill bit and gutting out the restrictor

[BriteRavenPictures57]

and the battery compartmens hold 2 darts ^_^

[kezzayo]

thnx so much this vid rocks

[mindstormsuser]

my recon shoots 40 feet flat stock

[BananaPortal]

can i use a dremel when i do the size reduction mod ?

[sillejinnerf]

Drac, is there a reason you left that piece untouched inside the plunger tube behind the air restrictor? Do you always leave them in there or have you removed the center piece before? If the latter, did you notice any difference between the two? Thanks.

[watertiger888]

can you do a tutorial on the newer nitefinder, i cand seem to get my barrel to open

[MaysAreAwesome]

@watertiger888 same, i cant open it to remove the air restrictors...should i just driil it out?