wat scale is this 1/8 or 1/10 cause im about to purcase one i know the 8th scales are faster with the .28 moter but then on the other hand the 10th scales have a .18 moter with 2 gears so
Ohh about the spur gear, i got an old metal gear out of an old machine in shop class and i cut the center of the plastic gear out and put in in the metal one and used JB weld (glue) to hold it in place, and ive been running it for 5 months now.
'and the only problem i have is that i keep stripping out my spur gear so i just bought like 10 replacement gears does anyone have any ideas as to why im always stripping them
@93FORDBRONCO1 it could be your gear mesh take a peace of paper bout the sise of the spur gear and move the bell so it taking in the paper and if there holes ur gear mesh is too toght so lousin the four engine mount screws on the bottom of chasis and move it a tad away from the spur gear and if it hardly leaving any marks tighten up the gear mesh same way as lousing it but twords the spur gear the paper sould be in the mid of holes and nothing hope i helped
thats a nice buggy. it sounds mean as hell to.. is it a stock pipe and motor?... and to all you people who like to bash exceed. shut up. im tired of hearing that they are crap and yadayada.. i havent had a single problem out of mine and i beath the piss out of it.. it hasnt broke once. in the like i dunno 9months ive had it.. my uncles 600 hpi truck has broke everytime hes taking it out. so IMO hpi is garbage you pay three times the price for bullshit that breaks.ALL RC TRUCKS BREAK WHEN BEAT!!
my friend has one and i have a redcat tornado bb and my didnt break and he hit my going 5 mph and his broke in have and mine got a small dent on it and he sat there crying for hours.
lol my camera* is good actually! i've had it for 3 years and its still better than most of the new ones coming out... KodaK 7.1megapix's 10x optical zooM... ummm why are u critiquing my video shot? Just watch the video and move on if you dont like it.
i would say there are a lot of good used* nitro's on ebay... I bought 2 Traxxas Nitro Rustlers for $65 each and they smoke this car (i also had a spare TRX 3.3 engine to drop in one so... maybe thats why it smokes this buggy--- lol)
Can anyone reading this tell me wich car I should buy thats fast yet not over $200??? Please I just don't know whats good, or what will last. And does anyone know how long one will run with a full tank of gas?
obviously most buggies that cost more will be better... is a BMW 3-Series better than a Ford Focus??? You be the judge. This car is inexpensive for those who want a nitro buggy without forking over their months paycheck.
How much was ur s8bx? my car was $150. I bought it because it was cheap not because I was trying to impress. :) This was just a fun car just like my XTM X-cellerator. I have 2 rustlers that I have fun with, one with a TRX 3.3 and even those are inexpensive. I got both Rustlers for $75ea. ;)
i do know how to adjust the 2 speed, you have to take out the gear box. and open it up.. and you either loosen or tighten it with a hex wrench. it will just make it engage either sooner or later ;)
Hi again, i forgot to mention this in my previous post, but did you have any problems breaking in the engine or anything else that would worry me, now my parents have actually agreed to let me get one (yay!)
I've already did my homework on these guys and i and bugging my parents to get me one for my b-day. Of course, they're saying focus on school and doing well and all that other crap. i was just wondering how fast this twospeeder can go, and is the 1 speeder go the same speed... forgive my newieness, this would be my first nitro.
parts are easy to get... i'm currently trying to figure out how to get steel spur gear and steel clutch bell installed... i've been having a problem with the spur gear melting on me. on my other car i've put steel spur gear and clutch bell, and ive had no problems at all... i'm trying to the same for this one but i'm having trouble at the moment. God quality car, replacement parts are cheap usually less than $5.
Ive screwed up the teeth in my lower gear twice now. Parts are cheap just i really wish i didnt have to spend 7 bucks for shipping on a 2 dollar part.
alright well i have another question. awhile back my car had a huge problem and i think it got dirt in the engine. i could not run it without the glow starter in. now it runs great just it over heats after about a half tank. i used to be able to run it for 4 tanks without it heating up. help plz??
i'd watch a video of how to break apart your engine, i'd clean all the parts, oil then, then rebuild it back. Then I'd go from there... thats all i can tell yA. like i said if its a known brand it shouldnt over heat easily. If is a stock engine that is unknown i recomment you upgrade ur engine.
who makes the 18 cxp??? i'd go with an o.s. .15 its $100 its reliable. I'm putting in a Traxxas TRX 3.3 in mine but it requires more modifications that expected so i wouldnt recommend that unless you have a few extra dollars and more time on your hands.
seanjohn2525... what type of engine u use... factory? like is it a known name engine? You prolly need to re-tune your engine... now if it is a un-known name engine you prolly need to buy a new engine... the engine in the Exceed RC is unknown and overheats easily. thats why i bought a new one.
really? man ya it has been overheatin so bad. also i got some dirt in it..... by accident. i think im might mod my car to hold the new 22xp engine. they are fast.
hey can anyone help me?? i am having some problems with my exceed rc its a .16 single speed. i cannot get it up to full speed for some reason, and i have adjusted the needle valve numerous times. when it is tighter it dies when i punch it and when its way open it works somewhat better. also it is overheating alot and i need some help. plz write back. ty
ya i did the low speed one too. i think im going to reset it tho cuz it might be wrong. its kinda funny cuz i run it and it works great then loses all the power and overheats after about half a tank.
I just bought the Traxxas 3.3 Engine for Spaztik* my Exceed RC Buggy... I will post videos when i get it in the mail and installed, i also bought a steel spur gear, i was having a problem with melting spur gears... a steel one should eliminate that problem. =)
ya i am taking in my car this week to get it tuned up and hopefully they can help me with the overheating. i might just get a new engine. i was thinking about beefing it up to a .20 but it requires over 200$ so idk what to do. if ur ever in new mexico let me know tho cuz we shhould cruise our cars. u seem pretty chill. thanks for your help man!
the O.S. .15 is a possible drop in engine for $100... you may go that route. O.S. is very reliable in all fields, boats, trucks, planes. I put one in my Tower Hobbies St.15 and it runs greaT. I decided i wanted a TRX 3.3 so bad that i just bought it... now i'm finding it hard to install in the Exceed buggy because the crankshaft isn't AS long as the stock engines shaft, so i'm having to buy new parts etc. Anyway I'll put up vid's when i finall finish. Haha ya u seem cooL too.
alright i might try that. i have the .16 in it already so if anything im gonna upgrade to .18 etc. also gonna add a transmition and also might, just might rebuild the whole chasis, for the torque of the new tires i am puting on. pretty much transforming the buggy into a monster truck lol. i will put up vids of mine when im done.
How do u make it shift like that
MrProwlers 4 months ago
hey is this a good rc i have been hearing bad reviews about this car planning on getting one
aaronibarra400 9 months ago
Thats cool
TheExceed1 1 year ago
is that a 1/10 scale ?????
hazzedsailing 1 year ago
thats just like my hsp backwash good little cars for the money :)
hawkism 1 year ago
how fast does it go
cooldude7c 1 year ago
if you are a bigginer you should buy one of the warheadsbuggys they cost about $200AUD soo its fairly cheap
Icecube5285 1 year ago
Where did you get the purple sink head
bryancbau 1 year ago
wat scale is this 1/8 or 1/10 cause im about to purcase one i know the 8th scales are faster with the .28 moter but then on the other hand the 10th scales have a .18 moter with 2 gears so
jbrownlm 1 year ago
@jbrownlm That looks like a 1/10th scale.
Ktrain0218 1 year ago
now i want a 2 speed
eggplantparrot 1 year ago
hey i got a question wat engine u useing? .16 or .18?
PBmadness12 1 year ago
im looking at buying one now..... estimated wat is the top speed?
SuperKane08 1 year ago
nice is it a 2 speed
jmaster558 1 year ago
can you tell me your settings ( high and low needle ) please ??
superjeje64 1 year ago
This was my first nitro rc.
EffHaters 1 year ago
How much did u pay for it and where did you buy It please reply! did u make it nitro or upgraded it to nitro!
tkteddie 1 year ago
do you have any electric buggys or trucks 1:10 scale rcs u recommend?? under 200 bucks
roboduke1086891 1 year ago
how fast does it go
funkilishes7 1 year ago
3:11 to 3:18 is funny lol
XxMetallicaFan420xX 2 years ago
Nice legs babe...!
fedmar66 2 years ago
would this make a good first car?
Jacob4744414 2 years ago
does it have reverse
bullsjewells24 2 years ago
Ohh about the spur gear, i got an old metal gear out of an old machine in shop class and i cut the center of the plastic gear out and put in in the metal one and used JB weld (glue) to hold it in place, and ive been running it for 5 months now.
freakystylecars1 2 years ago
nice car u can get a better one now
hoopcool2 2 years ago
SUCK!!!!!!!!!!!!!!!!!!!!!!
biking022 2 years ago
Nice buggy,how fast was that thing going?
Nightmare50001 2 years ago
@Nightmare50001 50-60mph i have had a few just tune it right and baby it.
esavagestig 2 years ago
i have this same buggy (different color)
'and the only problem i have is that i keep stripping out my spur gear so i just bought like 10 replacement gears does anyone have any ideas as to why im always stripping them
93FORDBRONCO1 2 years ago
@93FORDBRONCO1 they suck i have the same problem.
esavagestig 2 years ago
@93FORDBRONCO1 it could be your gear mesh take a peace of paper bout the sise of the spur gear and move the bell so it taking in the paper and if there holes ur gear mesh is too toght so lousin the four engine mount screws on the bottom of chasis and move it a tad away from the spur gear and if it hardly leaving any marks tighten up the gear mesh same way as lousing it but twords the spur gear the paper sould be in the mid of holes and nothing hope i helped
RcMasta90 2 years ago
yo is that the beginers version? the 2.5 i just got one in the mail but im not llowed 2 use it till thursday. just wondering if its durable 4 jumps
OhManqueso 2 years ago
@OhManqueso let me know how it is cause i want one of those
massdestruction6230 2 years ago
@OhManqueso lmfao not allowed THERES NO SUCH THING, GET OUT N BURN NITRO YA FLANGE
CRAFTYCARPER84 2 years ago
Hey superjetsky , why u always blame this exceed ? they work fine on other people..maybe it;s you the problem
NAK1371 2 years ago 5
i had a wire rip out and then i sadered it in and put a new battery in and it made the esc make weird noises then it caught on fire on my bed
skatedude212 2 years ago
im probably getting this but it will be black and i already got a losi desert truck and it blew up
skatedude212 2 years ago
how did you blow your desert truck just wonder ong,losi does suck by the way got a micro dt biggest waste of money ever
austinkx09 2 years ago
This has been flagged as spam show
no u suck dick
microflyyer13 2 years ago 2
This has been flagged as spam show
exceed sucks dick buy a real rc car like a traxxas cen losi
SuperJetski1 2 years ago
thats a nice buggy. it sounds mean as hell to.. is it a stock pipe and motor?... and to all you people who like to bash exceed. shut up. im tired of hearing that they are crap and yadayada.. i havent had a single problem out of mine and i beath the piss out of it.. it hasnt broke once. in the like i dunno 9months ive had it.. my uncles 600 hpi truck has broke everytime hes taking it out. so IMO hpi is garbage you pay three times the price for bullshit that breaks.ALL RC TRUCKS BREAK WHEN BEAT!!
idaho4045 2 years ago 2
my exceed seized during break in thats how shitty they are, get a t-maxx they dont break when beat
SuperJetski1 2 years ago
I have the 1/16 exceed nitro truck it is great
krwrocks 2 years ago
the reason people buy exceed rc is because they have very good prices!
warsall716 2 years ago 11
but the price matches the quality
buttdud1122 2 years ago
lol ass
austinkx09 2 years ago
@warsall716 and they're made from China so ya.
isthektrainonyou2 1 year ago
@isthektrainonyou2 i like the 1/16 scale, its cute and fast , its only 100bucks
DarkSkysify 1 year ago
yours dont look as fast but it looks as fast as my electric exceed one
davidd15b 2 years ago
where did you buy it at
kolew394 2 years ago
is that the hyper speed
unit299 2 years ago
This has been flagged as spam show
¤ø„¸¸„ø¤º°¨¸„ø¤º°¨ post to 3 other vids
¨°º¤ø„¸ Copy „ø¤º°¨ press F5 twice
¸„ø¤º°¨Paste ``°º¤ø„¸ OK
¸„ø¤º°¨¸„ø¤º°¨¨°º look at your background
gmh34al 2 years ago
wanna race? i only do pink slips ;)
cfrecomaxcluj 2 years ago
my friend has one and i have a redcat tornado bb and my didnt break and he hit my going 5 mph and his broke in have and mine got a small dent on it and he sat there crying for hours.
esavagestig 2 years ago
haha lmao
alec246 2 years ago
why would you cry over the worst rc car ever made? exceed and redcat are garbage chinesse brands
MoRRisoNRisiN 2 years ago
This comment has received too many negative votes show
Yes i agreee, Hpi is the way to go :)
loledplane 2 years ago
damn dude this is like the 3rd time ive seen one of your comments but yeah i agree with you
Tyler28125 2 years ago
lets race
1999151 2 years ago
does nitrorcx ship to the uk
callumxp 3 years ago
yeah
gallardo20000 2 years ago
2 speed!
rudeboyspain101 3 years ago
yeah it is 2 speed:)
guitarboym12 3 years ago
is this the 1 speed
or 2 speed>?
DIPBEE 3 years ago
it sounds like a 2 speed if listen closely sounds like it shifts into a different gear, but im not totally sure.
jaredmangelson 3 years ago
Hey where can i get one of these online? I want it to be a relighable website. Thx!
HpiFirestormRacing 3 years ago
go to nitro rcx . com i bought one and its very reliable
pabloiam22 3 years ago
looks like a tornado bb
Zeke4448 3 years ago
sounds rich
guitarboym12 3 years ago
i was wondering what kind of gas u should put in here? please comment back. thanks
hockeyplayavinny 3 years ago
20%
Zeke4448 3 years ago
is it easy to break in when you get them brand new?
carlbikeman14 3 years ago
lol... if u arent an experienced driver :) also the plastic gears strip easily after while... which SUX
ohxto 3 years ago
thay are only $120
crazyjoseph144 3 years ago
is tht the begginer version?
xbmx836x 3 years ago
I guess... I mean its a 2-speed... its not very expensive so suRe this car is for beginners! :)
ohxto 3 years ago
how long does the gas last on it
xxCOASTERJUNKxx 3 years ago
depends on what you have your needles set on... i've had it last for 10-15 minutes... so i'd say about 12 minutes :)
ohxto 3 years ago
That was poor ass, get a better camra man, dont do the shoe shit!
darkthunder66 3 years ago
lol my camera* is good actually! i've had it for 3 years and its still better than most of the new ones coming out... KodaK 7.1megapix's 10x optical zooM... ummm why are u critiquing my video shot? Just watch the video and move on if you dont like it.
ohxto 3 years ago
hey im thinking of getting one of those and i was wondering if you were satisfied with the fire green?
mexme1 3 years ago
i would say there are a lot of good used* nitro's on ebay... I bought 2 Traxxas Nitro Rustlers for $65 each and they smoke this car (i also had a spare TRX 3.3 engine to drop in one so... maybe thats why it smokes this buggy--- lol)
ohxto 3 years ago
do you still have one of those? I would buy it lol
loser94541 3 years ago
wtf is with the random shoe on 1:31
stevenrocks1 3 years ago
sorry my girl and i can't video tape well... why are u so worried about the shoe shot? Just watch the video or go watch a different one.
ohxto 3 years ago
kool
DirttRidaz101 3 years ago
hi i am interested in getting one of these buggy's. where did you get yours from???
min1316 3 years ago
Can anyone reading this tell me wich car I should buy thats fast yet not over $200??? Please I just don't know whats good, or what will last. And does anyone know how long one will run with a full tank of gas?
jgroh18 3 years ago
well theres lots of em, but if u want some thing thats going to last, its proboly gona be more than 200 bucks.
papergunian 3 years ago
oh and the electric is faster
mexme1 3 years ago
NOT AT ALL!!!
loser94541 3 years ago
you are not going to get any good nitro car for under 200 dollars
RcHelp13 3 years ago
if you want a fast car under 200 get a electric(brushless)
mexme1 3 years ago
I think people like nitro better... the sound, the smell, the ability to add more nitro and continue racing instead of charginG batteries :)
ohxto 3 years ago
you buy the stack and sell all the crap in it and get a new moter and stuff
exceed4ever 3 years ago
i getting one soon but sould i get the 1/16 blur or the beginner one with the .16 engine
moffattjake 3 years ago
i bought one online friday i should get it around wednesday or thursday this week
pwnerx25 3 years ago
im thinking of getting a 1/10 scale exceed rc buggy for $120. is it worth the money?
pwnerx25 3 years ago
that 1 has an 0s 18 in it
son8god8damn 3 years ago
is the buggys that cost more better.
ShabbaMama 3 years ago
obviously most buggies that cost more will be better... is a BMW 3-Series better than a Ford Focus??? You be the judge. This car is inexpensive for those who want a nitro buggy without forking over their months paycheck.
ohxto 3 years ago
i just wanted to know if when you got the car if the servos were broken. because i hear that is the case.;
pabloiam22 3 years ago
i got an lrp s8bx. No offence my caar would flog urs. Ur brakes seems to not work properly should get it fixed or u might end up into a wall.
r1037xboxcr7 3 years ago
How much was ur s8bx? my car was $150. I bought it because it was cheap not because I was trying to impress. :) This was just a fun car just like my XTM X-cellerator. I have 2 rustlers that I have fun with, one with a TRX 3.3 and even those are inexpensive. I got both Rustlers for $75ea. ;)
ohxto 3 years ago
Also, I wouldnt end up in a wall because of bad breaks... I know how to control my RC's ;)
ohxto 3 years ago
get are real rc car
mugenracer123654 3 years ago
I have more, thanks.
ohxto 3 years ago
i herd the exceed rc truggies r not good is that tru?
masterkdrifter 3 years ago
how ffast does that car go because i have a custom made car with three motors on it
gevonte13 3 years ago
talk back to your coments u losy hoboes ur not gonna get any subscribtions (lol i cant spell) if you dont respond
Alex285627 3 years ago
nice buggie. im getting the new upgraded infinity samurai carson buggie check sum vids out.
jackmhenshall90 3 years ago
what an xplosion of power
Cachatra 3 years ago
u want nitro instead of brushless gas is way more durable
KTMracinr08 3 years ago
Is this RC car a 2 speed or 1 speed
cause im thinking of buying one of these babys!!!
usa98030 3 years ago
what do you guys have the low end set at?
1ive0rd1e 3 years ago
is the nitro one is more durable than the electric one?
plorwax 3 years ago
do it shifed
Brensta18 3 years ago
1. is that the forza?
2. are the exceed buggys reliable? i wanted to get the exceed razor but im scared cuz the only info i can find about it is in broken english.
3. do you know anything about the razor? is it decently fast/reliable?
thanks in advance.
Polskmofo 3 years ago
the razor is one of the most fast 2 speed cars that will last and comes with a year warranty,
dex
soccaskizlz 3 years ago
LMAO. wtf
jojochintoh1234 3 years ago
I got the same buggy but different color
BATISTA9023 3 years ago
my buggy can go like 60 mph
CrazyMxRider123 3 years ago
i do know how to adjust the 2 speed, you have to take out the gear box. and open it up.. and you either loosen or tighten it with a hex wrench. it will just make it engage either sooner or later ;)
ohxto 3 years ago
wait so you can adjust the engage rpm cause mine
rolls at an idle and i want to change that
1ive0rd1e 3 years ago
i have that car
it goes so fast
do u know how to adjust the 2 speed?
Durant35TX 3 years ago
i have the same rc as this man so much power in it very fast my one is yellow and blue well worth the money
gerryhedge 3 years ago
is th exceed rc durable?
blanshan1 3 years ago
Hi again, i forgot to mention this in my previous post, but did you have any problems breaking in the engine or anything else that would worry me, now my parents have actually agreed to let me get one (yay!)
thanks.
rcmaniac202 3 years ago
Hi, Great video.
I've already did my homework on these guys and i and bugging my parents to get me one for my b-day. Of course, they're saying focus on school and doing well and all that other crap. i was just wondering how fast this twospeeder can go, and is the 1 speeder go the same speed... forgive my newieness, this would be my first nitro.
thanks.
rcmaniac202 3 years ago
Are these good off road???
monkey112294 3 years ago
damn! tat thing has a take off! do you got a 2 speed in that thing? or a bigger engine?
FredFan8 3 years ago
all stock. it is 2 speed.
ohxto 3 years ago
try turning in the idle screw and the throttle screw
borvan1 3 years ago
wats difference of speed from the 1 speed buggy and 2 speed buggy
c0nnor2212 3 years ago
its the transmission you here it shifting into the gears the more speeds the better and faster
gibsoncustom1 3 years ago
hey are these exceed cars good quality? And are they easy to get parts because im thinking of getting the mutant or the batallion
censucks 3 years ago
parts are easy to get... i'm currently trying to figure out how to get steel spur gear and steel clutch bell installed... i've been having a problem with the spur gear melting on me. on my other car i've put steel spur gear and clutch bell, and ive had no problems at all... i'm trying to the same for this one but i'm having trouble at the moment. God quality car, replacement parts are cheap usually less than $5.
ohxto 3 years ago
are theese good runing cars do u have trouble starting them
dhonda200 3 years ago
Ive screwed up the teeth in my lower gear twice now. Parts are cheap just i really wish i didnt have to spend 7 bucks for shipping on a 2 dollar part.
xstell132 3 years ago
my spur gear keeps melting too,thats the only trouble i have out of it.
FredFan8 3 years ago
i agree... if you find a way to fix that problem PLEASE let me know.. this car would be great is the gears didnt melt.. i agree!
ohxto 3 years ago
yeh its good
rcdrifter10000000000 3 years ago
1/10 or 1/8
mattsax1995 3 years ago
1/10
ohxto 3 years ago
dude looks awesome. im gettin the same one today and i excited
chazz6or6die6 3 years ago
alright well i have another question. awhile back my car had a huge problem and i think it got dirt in the engine. i could not run it without the glow starter in. now it runs great just it over heats after about a half tank. i used to be able to run it for 4 tanks without it heating up. help plz??
seanjohn2525 3 years ago
i'd watch a video of how to break apart your engine, i'd clean all the parts, oil then, then rebuild it back. Then I'd go from there... thats all i can tell yA. like i said if its a known brand it shouldnt over heat easily. If is a stock engine that is unknown i recomment you upgrade ur engine.
ohxto 3 years ago
ok thanks. and could you recommend a good engine? and how much it cost? i think i might upgrade just to the 18 cxp. thanks
seanjohn2525 3 years ago
who makes the 18 cxp??? i'd go with an o.s. .15 its $100 its reliable. I'm putting in a Traxxas TRX 3.3 in mine but it requires more modifications that expected so i wouldnt recommend that unless you have a few extra dollars and more time on your hands.
ohxto 3 years ago
seanjohn2525... what type of engine u use... factory? like is it a known name engine? You prolly need to re-tune your engine... now if it is a un-known name engine you prolly need to buy a new engine... the engine in the Exceed RC is unknown and overheats easily. thats why i bought a new one.
ohxto 3 years ago
really? man ya it has been overheatin so bad. also i got some dirt in it..... by accident. i think im might mod my car to hold the new 22xp engine. they are fast.
seanjohn2525 3 years ago
in some gas rc cars and buggys do u really hav to switch gears..
mattsax1995 3 years ago
...? if your car is a 2speed it should switch on its own after it hits a certain speed ;)
ohxto 3 years ago
were did u get urs and if its internet wat site
mattsax1995 3 years ago
is it a one speed or two speed car???
hunterx4losangeles 3 years ago
i believe his car is a 2 speed. cant u hear the gear shift??
seanjohn2525 3 years ago
hey can anyone help me?? i am having some problems with my exceed rc its a .16 single speed. i cannot get it up to full speed for some reason, and i have adjusted the needle valve numerous times. when it is tighter it dies when i punch it and when its way open it works somewhat better. also it is overheating alot and i need some help. plz write back. ty
seanjohn2525 3 years ago
u did ur low speed needle?
and if its runnin too hot u might have it lean too much not enough
SHAWEAGLEBOI 3 years ago
ya i did the low speed one too. i think im going to reset it tho cuz it might be wrong. its kinda funny cuz i run it and it works great then loses all the power and overheats after about half a tank.
seanjohn2525 3 years ago
holy shit tats fast
wwwaaasssuuuuppp 3 years ago
I just bought the Traxxas 3.3 Engine for Spaztik* my Exceed RC Buggy... I will post videos when i get it in the mail and installed, i also bought a steel spur gear, i was having a problem with melting spur gears... a steel one should eliminate that problem. =)
ohxto 3 years ago
ya i am taking in my car this week to get it tuned up and hopefully they can help me with the overheating. i might just get a new engine. i was thinking about beefing it up to a .20 but it requires over 200$ so idk what to do. if ur ever in new mexico let me know tho cuz we shhould cruise our cars. u seem pretty chill. thanks for your help man!
seanjohn2525 3 years ago
the O.S. .15 is a possible drop in engine for $100... you may go that route. O.S. is very reliable in all fields, boats, trucks, planes. I put one in my Tower Hobbies St.15 and it runs greaT. I decided i wanted a TRX 3.3 so bad that i just bought it... now i'm finding it hard to install in the Exceed buggy because the crankshaft isn't AS long as the stock engines shaft, so i'm having to buy new parts etc. Anyway I'll put up vid's when i finall finish. Haha ya u seem cooL too.
ohxto 3 years ago
alright i might try that. i have the .16 in it already so if anything im gonna upgrade to .18 etc. also gonna add a transmition and also might, just might rebuild the whole chasis, for the torque of the new tires i am puting on. pretty much transforming the buggy into a monster truck lol. i will put up vids of mine when im done.
seanjohn2525 3 years ago
lol ok.
ohxto 3 years ago
I'm about to buy a Traxxas 3.3 Engine for this Exceed RC ;) I'll put up new videos when i do.
ohxto 3 years ago
i have a new car and i did everything as described in the manual.
the car starts, runs for a few seconds and stops.
do you have any idea on what the problem could be ?
thanks in advance for your help.
Chris from Holland
mjavd 3 years ago
what mix do you use
kabobee440 3 years ago
whats better this or the tornado bb?
NIKON777 3 years ago
whats the differenc from 1/8 to 1/10????
goldskater4 3 years ago
1/8 is larger than the 1/10 1/1 would be the size of a vehicle u sit ur ass in. ;)
ohxto 3 years ago
how fast does it get?
goldskater4 3 years ago
20% nitroa??????
33pjh 3 years ago
Engine VX 16 ????????
33pjh 3 years ago
no vx-18
reatard132 3 years ago
I love at :54 when it just shoots off.
soccerboy1996 3 years ago