ODP: What's it all called?

[kingraider7]

i seen some guy play paintball and he played when it 1st started he was telling us how he would only wear googles and stuff but no one shot him they asked him to surrender

[optical76]

hahahaha @1:02  awesome!

[pbplayer4bl999]

hey i was shooting my rail over the crono and i shot a hot one turned it the wrong way and i think i blew something up now it leaks out the back any suggestions i have the same gun as you plz help

[olddudepb]

Hopefully it's just an o-ring. Take the gun apart, check them all, replace any that look iffy. Lube it up and test it. You might want to do the same to the reg. There are Youtube videos about taking apart PMR regs. If you were shooting *really* hot, you might have blown your solenoid, in which case you'll probably want to send the gun to Dye, unless you know how to replace the 'noid yourself. Good luck.

[pbplayer4bl999]

it was over 300 so i think i blew it up i think ill send it to dye

[PaintballBros9598]

its that a proto slg??

[olddudepb]

'07 Rail SE

[nubtaker13]

i think this is the 08 SE cuz i have the same gun

[lovepaintball911]

how is that gun on hpa like how often do you have to refill it?

[olddudepb]

I haven't done a serious test, but I'd estimate I get 8 or 9 pods out of a 68/45 fill, which usually only goes to 4000.

[C0S3NZA]

I cant get the macroline off.

[olddudepb]

Pull the little metal collar part of the fitting away from the macroline. Good luck.

[codyross93]

i have that gun

[DON9R9R]

whats a good long range paintball gun

[olddudepb]

No such animal, really, physics being what it is. 68 caliber plus 300 feet per second means that every gun is going to have more or less the same range. Barrels are a different story, however. A backspin barrel, like a Flatline for Tippmann guns, or an Apex for everything else, will get you a flatter trajectory and more range. How much of that extra range is effective is a source of debate, because the balls won't break as often.

[olddudepb]

dwell = how long board sends power to the solenoid for each trigger pull

ABS = Anti Bolt Stick. Increases dwell for first shot after marker is powered up, to reduce first shop drop off.

debounce = setting that reduces the sensitivity of the board to trigger movement, to insure that the gun fires only once per trigger pull.

[bulletsponge221]

wat is dwell abs and debounce

[olddudepb]

If it's too big, sand it down. If it's too small, wedge an o-ring in there.

[p0xit]

if the hopper doesnt fit for a gun such as the slg using a eggy 3 what should i do?

[olddudepb]

If you don't have a guide screw, there's nothing to guarantee that the bolt is lined up properly with the air port in the gun's body. Make sure all of your o-rings are good, replace any that aren't, relube it all, and assemble the gun properly, with the guide screw in place. If that doesn't do it, find an airsmith or send it to Proto.

[datyoungGx27]

i reacently upgraded my bolt and i have been having ait leaks from the backcap. my guid screw was missplaced, could that be the problem to my leak??

[PhillzTV]

dude is it worth buying a gun for 130$ more that has eyes?

[olddudepb]

I don't know if it's worth it for you. Personally, I want eyes, because chopping paint in the middle of a tournament game doesn't cut it.

[PhillzTV]

ty

i don't think that i should spend an extra 130$ on something im new to

[kookamajunga]

imo eyes ARE that important. They make gamesmuch more fun because your not shooting snot out of your barrel

[PhillzTV]

lol

i can't really aford yet stilll working on magic tricks to get money

[xmwpkx94]

nice video man

[PSYClonePaintball]

I swear all pmr camo LEs come differently my one has an edge trigger gaurd and trigger and everyone ive seen has a unique feture.!?!

[olddudepb]

I think the SEs all come with the Edge trigger and guard. Mine did. I didn't like it, so I switched it out.

[TOTALSLAG]

nice one im a new owner of the matrix 09 this has helped me a bit umm does to uppbody come apart ??

and could u explain wot the button under hte on/off button does thanx

[olddudepb]

Uhhh...the bolt comes out and the body can be separated from the trigger frame. Beyond that, not so much.

The button under the on/off turns the eyes on and off.

[wgp1234]

I didn't know they were called "macroline things"... Nice one! ;)

[olddudepb]

Fittings. I said fittings. Really. My wife says I mumble.

[BrainInAVat562]

I always get confused because the thing you screw your tank into is an ASA but then also there is a small piece that the HPR screws into which I believe is also called an ASA...they seem like pretty different kinds of parts but obviously they both have something that screws into them that air goes through?

[olddudepb]

Yeah, that's right. If I need to be specific, I'll say "tank ASA" or "reg ASA," but unless someone specifies, I always assume they're talking about the tank ASA.

[Cherbert354]

Very Nice Video, hope to see your next one!

[xdgscorpion]

How do you remove the asa I have a pmr and it wont come off.

[olddudepb]

It's a pain. If you take the battery out, you'll find a hole in the bottom of the inside of the grip. Fish around in there with a 3/32 allen key (the one that fits the grip screws), and loosen the screw that holds the ASA in place.

[xdgscorpion]

oh ok.

To bad i dont think i have that allen key,because I bought my blue pmr with virtue board used,and it was missing some allen keys. and im missing the screw for the bolt and one of the screws for the trigger. :(

I will probably call dye tomorrow and they should hopefully send them to me for free.

[DevinEzell]

Great vid for those new players who haven't read any manuals yet or purchased their own marker