The worst problem with this one isn't the one all the safety nazis are hollering about, it's the horrendously dull saw blade. Sharpen the blade properly and this would be a lot safer and a ton easier.
Looking at the comments you can see that every safety policeman on youtube jumped on this guy. For one he didnt die and his age presence of all limbs must count for something. He has personal responsibility for his safety and should he get hurt or cut in two, so what?? he is responsible. So lets cut him some slack and let him crack on. Just because what he does is not what you or the rest of the world would have done , doesn't make you right.
@ZS6JMP--- Why? why would we cut him any slack? He's a dumba55 for doing what he's doing... it doesn't matter that in spite of his stupidity he made it to that age with all five limbs... well, I don't know about the fifth limb, can't see it... but he surely has a huge set of cajones still danglin'... and yes, it DOES make the safety police right... there is absolutely no doubt that this is a terribly unsafe practice, you can't argue that, even in south Africa.
@jeffpicks You see thats just my point, liberals like yourself wont be happy about safety...ever, to the point that nothing gets done and there is so much crap and paperwork to go through that the most miniscule task becomes a health and safety pain in the arse. I see this at work every day. H&S makes us all robots that must do and think the same. I love my workshop, as its the only place I can leave H&S bullshit at the door, and guess what, I still have all my bodily functions. BTW nt from SA
@ZS6JMP -- I know what you mean about it being a pain in the arse, I have to deal with it myself... calling me a liberal because I think this guy is a nutcase is wrong! The bottom line is this; that guy is a total nutcase for his total disregard of his own safety... and someday he will hurt himself, mark my words, but we'll never know... and I'm FAR from a liberal! BTW, If you were one of those radio ham geeks, your 'nickname' would put you in SA... took a shot in the dark and failed! laterz
there's nothing wrong with the saw, per se, but that guy is an idiot. one slip and maimed or dead. every moron has his "eye bin duein this fer 37 yrs w/o uh prahblum". The next day, it's an application to the state for burial or welfare or healthcare. It would take all of 30 min. to construct a durable, safe "wood pusher" to keep you alive and whole. Think on it pardner.
good saw but the blade needs sharpened and a gaurd needs put on its not that bad as long as you don't push like that and use common sense i myself am restoring one like that but it runs on a 1 cylinder engine
My brother had been tortured during five and a half years by the German BND which is the renamed 3rd Reich GESTAPO. He was assassinated on 11.7.09 to suppress our homepage.
Check out my channel and homepage for information on human rights abuses including systematic use of rape, torture and murder by the German State,
If you look really closely, you can see a roll of duct-tape. That's to tape the two halves of his head back together long enough for him the stagger back to the cabin and call 911 with his trusty flair gun.
Hello, no doubt that can be dangerous, but its just how things were done. We had an old saw similar, fed off of a 4 hp make and break engine for cutting up slabs from the mill. Now we use chainsaws, but those are dangerous as well. its how you cut your firewood one time, dont mind the neg comments. Im sure most have better things to do then searching up peoples videos to make neg comments. Nice video.
I hope all you folks who think what he is doing is dangerous don't drive or travel on roads; I have never heard of anyone being killed by a bench saw, and although our family and most of our rural
neighbours had various versions of this type of saw, I personally never heard of
anyone losing so much as a finger ! Thousands (including children ) are killed and maimed on roads every year. What are all you negative commentators ? Lemmings ?
The reason this guy has to work so hard to feed the wood into the blade relates to
the rake angle of the teeth (often called hook). If the tooth rake is around 10 to 20 degrees positive (my best guess for a cross-cut blade like this), wood being cut near the table surface would experience a self feeding effect, however wood 12" above the table would experience a
negative rake angle and would actually be pushing against the wood making it harder to feed.
It isn't worth that risk to cut firewood, the blade can snatch so easily when cutting logs on a table saw. And with that amount of power it will just throw that lump of wood in your face.
haul that piece of shit to the scrapyard, take the money and go buy a case of beer, crack one open and just sit there and think about what a fucktard you are.
Nice big old saw tabel, but I think I will stick to my cordwoodsaw. I can push logs from the side of the blade. What was this tabel originaly used for. Were ther more parts to it. Phil
damn he can die as fast as he thinks pushing the log against that giant blade. SAFE FIRST , SAFE FIRST , SAFE FIRST... learn it before you die man, come on!!!!
dude seriously thats just dumb as hell... Invest in a STIHL. there ms 290s are light weight, save alot of energy, hell of a lot safer, and fuck its just quicker... be smart use your head before it goes through the rusty blade on your "SAW"
@barsandstars1822 --- what you said... and what happens when that log pinches that rusty blade and that blade throws it back at his head... if the blade don't get him, one day, one of those logs is gonna smash his face like gallagher smashes a watermelon.
yea i would say thats pretty stupid. there could be a soft spot halfway through the log and when you hit it you would go flying into the blade. and the thing of it is it dont even cut fast. my chainsaw can cut faster and you dont have that risk..
Rather than insult you guys I might just instead say that it would be much safer to make a rig that pulls the log through so that the force of your body is headed AWAY from the giant spinning blade of death. At least that's the way I am building mine :)
Meu ídolo!
celocustodio 1 month ago
Instant cranium gap
LEAFCUT 1 month ago
One slip and he's going to give himself a labotomy
agt155 2 months ago
to all people who think this is unsafe
as long as you are NOT a retard, it IS possible to this safely
Woodbogger13 2 months ago
@Woodbogger13 True but still... one moment of lack of attention and you could louse an are or worse! I wouldn't risk it!
samjeanb 2 months ago
The worst problem with this one isn't the one all the safety nazis are hollering about, it's the horrendously dull saw blade. Sharpen the blade properly and this would be a lot safer and a ton easier.
vburke1 4 months ago
I foresee a Darwin award in your near future
Redshift21 5 months ago
I swear I was looking for the blood to fly any second (stupid)
funovitzsgt 6 months ago
Looking at the comments you can see that every safety policeman on youtube jumped on this guy. For one he didnt die and his age presence of all limbs must count for something. He has personal responsibility for his safety and should he get hurt or cut in two, so what?? he is responsible. So lets cut him some slack and let him crack on. Just because what he does is not what you or the rest of the world would have done , doesn't make you right.
ZS6JMP 7 months ago
@ZS6JMP--- Why? why would we cut him any slack? He's a dumba55 for doing what he's doing... it doesn't matter that in spite of his stupidity he made it to that age with all five limbs... well, I don't know about the fifth limb, can't see it... but he surely has a huge set of cajones still danglin'... and yes, it DOES make the safety police right... there is absolutely no doubt that this is a terribly unsafe practice, you can't argue that, even in south Africa.
jeffpicks 6 months ago
@jeffpicks You see thats just my point, liberals like yourself wont be happy about safety...ever, to the point that nothing gets done and there is so much crap and paperwork to go through that the most miniscule task becomes a health and safety pain in the arse. I see this at work every day. H&S makes us all robots that must do and think the same. I love my workshop, as its the only place I can leave H&S bullshit at the door, and guess what, I still have all my bodily functions. BTW nt from SA
ZS6JMP 6 months ago
@ZS6JMP -- I know what you mean about it being a pain in the arse, I have to deal with it myself... calling me a liberal because I think this guy is a nutcase is wrong! The bottom line is this; that guy is a total nutcase for his total disregard of his own safety... and someday he will hurt himself, mark my words, but we'll never know... and I'm FAR from a liberal! BTW, If you were one of those radio ham geeks, your 'nickname' would put you in SA... took a shot in the dark and failed! laterz
jeffpicks 6 months ago
rewelacji niema tępa piła i za małe obroty jednym słowem chujnia;D
PolskaZaDobra 7 months ago
I hope you didnt forget sunscreen
evilintheeast 7 months ago
I think I see a shed in the background with some sharp edges. Best you cover them up before someone gets hurt
anthony9thompson 7 months ago
Sharpen the blade.
jackmiser 8 months ago
That is a Sawmill Breast bench, made for 2 person sawmilling logs into timber-NOT a docking saw.
acco1840 8 months ago
dam that sure looks safe to me.
kimbotube59 8 months ago
What a dumbass
nwhiggins 9 months ago
Dangerous as hell!!
dearmond11 10 months ago
This dude has to be duller than the frickin' blade he is using, that is a death trap.he is just waiting to feck up and die. stoopid.
LOSERLARRY 11 months ago
Comment removed
DamnStraightM35A2 11 months ago
if u have to push it like that the blad has gotta be dull!
ibow2no1 1 year ago
retard gotta be English
JINKO77 1 year ago
there's nothing wrong with the saw, per se, but that guy is an idiot. one slip and maimed or dead. every moron has his "eye bin duein this fer 37 yrs w/o uh prahblum". The next day, it's an application to the state for burial or welfare or healthcare. It would take all of 30 min. to construct a durable, safe "wood pusher" to keep you alive and whole. Think on it pardner.
kenfo0 1 year ago
good saw but the blade needs sharpened and a gaurd needs put on its not that bad as long as you don't push like that and use common sense i myself am restoring one like that but it runs on a 1 cylinder engine
ackland3 1 year ago
This has been flagged as spam show
My brother had been tortured during five and a half years by the German BND which is the renamed 3rd Reich GESTAPO. He was assassinated on 11.7.09 to suppress our homepage.
Check out my channel and homepage for information on human rights abuses including systematic use of rape, torture and murder by the German State,
Martin Bott
wwwtotalitaerde 1 year ago
Dude, come out of the stone age and get a chain saw!
icicicles 1 year ago
no wonder they decided to name all those gory movies "Saw" that thing is scary as crap
turborabbit1114 1 year ago
HEAVE!...HEAVE!......AAAAAAAAGH!!!
fannybaba 1 year ago
Not a video I want to look at twice.
mousemovies1 1 year ago
you've got to be kidding
216252lou 1 year ago
i wonder what will happen to his face if he slip..
kiolee 1 year ago
@kiolee Split lip, perhaps ??
mountfields 1 year ago
this is the most dangerous looking saw ive ever seen
emutiny 1 year ago
If you look really closely, you can see a roll of duct-tape. That's to tape the two halves of his head back together long enough for him the stagger back to the cabin and call 911 with his trusty flair gun.
LiquidTokyo 1 year ago
His name is "No Thumbs Murphy" and before this job he was a pirate. Believe it or not, he lost his thumbs in a freak bowling accident...
LiquidTokyo 1 year ago
That's too much frickin' work.
50guitar 1 year ago
chain saw would be faster
qldaxeman 1 year ago
dumb ass shit!!!
optimus122581 1 year ago
This is a bit scary to look at... but I guess he knows what he is doing.
mectechman1 1 year ago
There is not enough money in the world to pay me to do that. One slip and you've put that blade through your forehead. One slip and you lose and arm.
userunavailable3095 1 year ago
I think you should sharpen it. Then you can have a slightly less painful catastrophic accident.
MoreTimeThanYouThink 1 year ago
se scivoli ti tagli in 2 xD!!!
0007donato 1 year ago
a sharpen wouldnt go astray...
lacrossetechnology 1 year ago
that dude is crazy
usaexcellent 1 year ago
shit !!!!!!!!!!!!!!
caneyfirefighter 2 years ago
THAT IS CRAZY!
spartaeus 2 years ago
N1XVAN - LMFAO
Mate, how are you still in one piece?
king5ley 2 years ago 2
Now that's old school right there. I'll take a saw bench over a chainsaw any day of the week.
morpheusduvall 2 years ago 2
Good gravy! That blade must be dull. A good blade will pert near pull the wood into itself.
I'm surprised you didn't fall into it and kill yourself!
oldtimeway1 2 years ago
sheesh mate how many times did they sew your arms back on
N1XVAN 2 years ago
Wow.. and he still has both arms.
Davidbzm01 2 years ago 5
@Davidbzm01 I am surprised he still has his face the way he has to lean in to that
pusswhakker 1 year ago
it might have a ripping blade on it for planking wood,and hes just using it for crosscutting firewood....
claymoreman90 2 years ago
i wouldnt fancy mitring crown moulding on that beast.....lol..if i was nearby id come and give yu a hand..
claymoreman90 2 years ago
wtf are you retarded sell that bitch to a museum and go get a husky or sthill with a 20" bar!!
MrPoonasty 2 years ago
hmm whats the worst that could happen with a machine like that i would almost bet that in that machines lifetime it has killed a couple of people
wesdawg84 2 years ago
hell yeah that bitch killed johnny cash's brother!!
MrPoonasty 2 years ago
god sake man wat are u doin, watch my vid to see how to use a breast bench
tassiechamp1 2 years ago
hmm, nope, perfectly safe XD
BigBoofBoof 2 years ago
Hello, no doubt that can be dangerous, but its just how things were done. We had an old saw similar, fed off of a 4 hp make and break engine for cutting up slabs from the mill. Now we use chainsaws, but those are dangerous as well. its how you cut your firewood one time, dont mind the neg comments. Im sure most have better things to do then searching up peoples videos to make neg comments. Nice video.
gilldavj2 2 years ago
nice one clancy871 !!!
8superrocky1 2 years ago
nutter
shawniganandy 2 years ago
I hope all you folks who think what he is doing is dangerous don't drive or travel on roads; I have never heard of anyone being killed by a bench saw, and although our family and most of our rural
neighbours had various versions of this type of saw, I personally never heard of
anyone losing so much as a finger ! Thousands (including children ) are killed and maimed on roads every year. What are all you negative commentators ? Lemmings ?
CoolHandLuke43 2 years ago 3
The reason this guy has to work so hard to feed the wood into the blade relates to
the rake angle of the teeth (often called hook). If the tooth rake is around 10 to 20 degrees positive (my best guess for a cross-cut blade like this), wood being cut near the table surface would experience a self feeding effect, however wood 12" above the table would experience a
negative rake angle and would actually be pushing against the wood making it harder to feed.
CoolHandLuke43 2 years ago
One slip away from schitzophrenia,-------a split personality!!!!!
cplmaccas 2 years ago 3
Dang man, just jump in front of a train or something!
SPACECADET2U 2 years ago 2
Fuck, I am used to using saw benches and watching that makes even my toes curl!
fannybaba 2 years ago
It isn't worth that risk to cut firewood, the blade can snatch so easily when cutting logs on a table saw. And with that amount of power it will just throw that lump of wood in your face.
ColonelVandal 3 years ago
now that is a safe system, i want one for the kids to play with!!
58belvedere 3 years ago 5
mercifully, it's so blunt that if he fell onto it he'd only get a scratch
rtyees 3 years ago
haul that piece of shit to the scrapyard, take the money and go buy a case of beer, crack one open and just sit there and think about what a fucktard you are.
CLANCY871 3 years ago
even if it was a new blade instead of that rusted up relic it would make such a difference
captincaveman89 3 years ago
Hey sweetie, this is my message lets get together at 8 ,,Tell you later,,,The iron duke track marshall,,,,,,,davie
lumberboy286 3 years ago
id bet my left nut that getting ur arm reattached would cost more then a new saw ¬¬
captincaveman89 3 years ago 5
death wish !!!! look at that blade omfg.
THRUXTON1 3 years ago 5
stun osti de malade ca si i manque sa chot ses qui qui se fais scier en 2 lol
heylecave911 3 years ago
hahahahahahahahahahahahahahahahahahahahahahah
you fuckin twatlol
churd243 3 years ago 3
Nice big old saw tabel, but I think I will stick to my cordwoodsaw. I can push logs from the side of the blade. What was this tabel originaly used for. Were ther more parts to it. Phil
farmerphil 3 years ago
damn he can die as fast as he thinks pushing the log against that giant blade. SAFE FIRST , SAFE FIRST , SAFE FIRST... learn it before you die man, come on!!!!
thunderstorm868 3 years ago 21
@thunderstorm868
Haha... if I'd have tried this maneuver in woodshop I would have received a prompt smack in the chops from the teacher.
ObdurateJayhawker 1 year ago
dude seriously thats just dumb as hell... Invest in a STIHL. there ms 290s are light weight, save alot of energy, hell of a lot safer, and fuck its just quicker... be smart use your head before it goes through the rusty blade on your "SAW"
barsandstars1822 3 years ago 15
@barsandstars1822 you mean a husky right?
but seriously you couldn't pay me enough to do what this guy is doing. death wish maybe?
123456789mischief 1 year ago
@barsandstars1822 Lets slate him because what he does goes against "modern sophisticated conventional thinking" ???
ZS6JMP 7 months ago
@barsandstars1822 --- what you said... and what happens when that log pinches that rusty blade and that blade throws it back at his head... if the blade don't get him, one day, one of those logs is gonna smash his face like gallagher smashes a watermelon.
jeffpicks 6 months ago
Come on gentlemen, this is Devon, after all
donoghueandstevenson 3 years ago
you are the stupidest idiot jordan i hate you fatty
Skipper72Productions 3 years ago
yea i would say thats pretty stupid. there could be a soft spot halfway through the log and when you hit it you would go flying into the blade. and the thing of it is it dont even cut fast. my chainsaw can cut faster and you dont have that risk..
HUSQVARNA394 3 years ago
ur an iddiot doing that, you could be cutting tht log and ur at the end, and you dont relize it then bam, dead
Skipper72Productions 3 years ago 2
U realize that thats how Johnny cash's brother got killed!
Vintagesansui800 3 years ago 3
yeah how bout no :/
captincaveman89 3 years ago
Rather than insult you guys I might just instead say that it would be much safer to make a rig that pulls the log through so that the force of your body is headed AWAY from the giant spinning blade of death. At least that's the way I am building mine :)
thechurchofdave 3 years ago 2
There's a tool called a "Chainsaw". They can be dangerous - but they're not FUCKING INSANE!!
localcrew 3 years ago 4
he must be as crazy as he looks....yeha
blackthomas50 3 years ago
could end up with RED logs !!!
mountfields 3 years ago
only in England
drugaria 3 years ago
holy fucking jesus balls !
captincaveman89 3 years ago
"Mind you don't cut yourself, Mordecai" I wonder if that things cuts skulls too?
smartin684 3 years ago
no thanks i will stick with a chain saw i prefer my arms stay attached to my body
timbco475 3 years ago
Rather you than me - though its great what you can get up to when your not bound by health and safety!! I think I'll stick to my chainsaw though!!
Chopitsvids 3 years ago
You've got more balls then I do man lol
Acoustic1313 3 years ago
Looks a little blunt...I've just got a nice new 28" blade for my Bamford No.2 Saw Bench...
nwashin1 4 years ago
LMFAO oh my god! That is well dodgy!! LOL :)
mothy1978 4 years ago
jesus christ
what if he slipped into while pushing.
very crazy man
but hot
:-)
Justanotherson 4 years ago 3
haha fuk that lol
liamnmegan 4 years ago 2