Added: 5 years ago
From: cont7
Views: 261,787
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (697)

Sign In or Sign Up now to post a comment!
  • I like how they just kaugh about it..

  • I don't see why a bit of duck tape wouldn't help?

  • Ouch... That must have costed you a lot to repair it...

  • I don't get it. why he is laughing???? he should be crying. I would...

  • Was that the clutch slipping going into 2nd?

  • @damstachizz I think this is the drivers idea of learning to drive stick. On their own race car.

  • oh look I got the hole? say that again! lol

  • @TheSlayerKill

    First he jumped the tree secondly it took enough NOs to blow his block up in order to do it. Remember the Evo made it home that night not the Z. Now that is ROFL DSM power baby!

  • WOW that jap quality sure is something ( MPFFFFF )

  • Now me and the mad scientist gotta rip apart the block and replace the piston rings you fried...

  • aluminum block ............pst sucks

    fuel injection.........pst sucks

    if it doesn't have a carburetor it was not made for racing

  • @tonyfazt Yes, redneck. The only type of racing in the entire world is drag racing. How many carburated big blocks do you see at your local auto cross or road course?

  • @tonyfazt What is this "carburetor" you speak of?

    LOL just kidding ;p

  • Oh well!

  • u gotta learn your engine dude, if you wanna put nitrous in it much better put all stage 3 + aftermarket parts on all of your internals. In that case you'll have assurance not to blow it up. 350z stock aint good for nitrous system, Hope u may build your 350z a more powerful engine set up next time without nitrous....

  • i dont know ! BUT that rod looks stock to me , im just saying . i work at a machine shop , and BEFORE you can put a turbo an a car you most change the following : rods, crank , pistons , bore the cylinder walls and get sleeves , change cams . cars that did not come with turbo from the manufacture ,are not built for one . you most change all and some more of this parts so that this does not happens to you ! waste of money. but THIS IS ONLY MY OPPINION !!!

  • @amigos1996 thats only if you want to put a large turbo. if you put a weaker turbo its not an issue.

  • @CemetaryGatesML maybe if you are runnig it on 1.99 psi . lol

  • @amigos1996 Lmao...i got a friend who put a trubo on his old Ranger that runs like 6lbs of boost.

    and another friend that put a turbo on his 95' camaro v6 thats like 6 or so lbs. their cars are just fine.

  • @amigos1996

    I firmly agree that is why the DSM wasn't limping.

  • @amigos1996 The block is Aluminum so im pretty sure it has sleaves. Also boring the cylinder walls doesnt prepare your motor for boost from a turbo or a supercharger. Also the internals are Forged from the factory. The only think i would think to do is lower the compression before you boost to much. People run 8-11 pounds on a stock bottom end and run years on it without a blow up. Not sure how much boost this guy is running but theres always a chance of engine failure even when you prepare.

  • I put 250 HP 2 stage shot on my completely stock internals and I'm just so friggin blown away that I grenaded my motor. Typical ricer bullshit (not the car, the people)

  • was that a cast iron or forged steel connecting rod

  • is it a force induction?

  • bye bye engine

  • let that be a lesson for all you lowlife street racers who dont put perfomance pistons in your engine what to lazy to take apart an engine that intake and nos wont do shit in 20 seconds the nos will burn the stock pistons, and you guys call yourselves pro street racers please go to mechanic school you dumb fucks.

  • @Donzburnt420 bottles are for babies, real men get blown ;)

  • hahaha crappy driver, crappy car, good riddence 

  • Leave the drag to the Big Blocks.

  • Just go buy a Subaru WRX. Now that it's dead.

  • bottle feeding is for mechanically inclined retards 

  • Karma for being on a drag strip it belongs on drift track

  • is that was stock rod's ?

  • thanks mom and dad, now they can spoil him with another car.

  • well, that sucks- put an RB26 in it now

  • well at least he doesnt have gunk in his engine :) nos just blows it all out pisitons and all :) lmfao

  • Karma for the oversized Nismo decal

  • @RauL8604 nah its karma for using nitrous

  • i bet mommy and daddy bought the kid the car for him and he put a turbo on it and expected it to hold up lol

  • @EasternJaneRider haha nope, no turbo, just nos . . . a ridiculous amount of nos haha if a person doesn't do the proper modifications to a motor for it to hold up to a nos set-up, this is what will happen. I've seen this happen to a quite a few people :P it sucks if this is your daily driver haha

  • Should've let off a little more nitrous at the beginning:)

  • the nissan gt-r is a more comparable car to the zr1, and with its 3.8 liter v6, it is 17th on top gear's fastest lap times, right in front of the lamborghini lp640, the corvette zr1 is 21st, the ford gt is 26th, the mitsubishi evo V-III fq400 is 57th, the corvette c6 is 80th the 2011 camaro ss is 93rd, the dodge viper srt-10 is 102nd,

  • @austin32m You do know each car is geared towards different tracks right? Certain tracks shine over others while others(ring) like the c6, viper, and GT-R shine horribly on the others

  • wow the intake came off, who cares.

  • aluminum blocks suck...

  • @tt300zxkid dumbass

  • @halohadel um fuck you!

  • @tt300zxkid aluminum blocks are usually more stronger than iron blocks.

    look it up

  • @halohadel ok im not goin to argue with you over this i believe what you say is true... but ive known of 4 people with z's and all of them blew a whole through the block.

  • @tt300zxkid idiot!

    the connecting rods are the things that put holes in the block.

    With stronger rods, it won't do such a horrible thing

  • well thats one way to see the inside of your motor

  • gm will blow too even doing normal driveing not even hard miles. just go old check out my vid of my 08 impala...... its shit

  • should of bought a GM

  • hehehe, look at the driver b4 he takes off i just keep thinking " he dosnt know his days is going to get a lot rougher"

  • sux to be that guy!

  • it must have cracked vtec too hard

  • Lol you still pretty much ate that subaru.

  • @TheSqeeek Some asshole pointed out via my inbox that it's an evo. My bad, I was looking at the 350z. :) I need more sleep or something...

  • "Look here, it blew this off too, it exploded this!" I guess the guy who said this also built this engine?? lol

  • I love all the haters on youtube. Guess nothing makes them feel better than getting on you tube talking about shit they know nothing about and about cars they could never buy. I think it should be a rule if your talking shit on somebodys ride on youtube you have to post a vid of your own ride showing how fucking bad your ride is.If you don't have vid to prove it than shut the hell up. Im not saying my ride is better than your ride so don't waste time asking "were's your vid?".

  • GODSMACK IN THE BACKROUND!!!!!!!

  • @MrRambo420x i thought it was pearl jam

  • this is simple... Your a retard, i wouldn't give that kid a fucking plunger.

  • @auji700 LOL

  • spray some Q20 on it or Duralube..and give it a crank...worked for me...15k miles and no problems..good luck.

  • @fsacoor SURE IT DID

  • More idiots trying to live out their Fast & The Furious dream at the expense of a good cars engine. Probably just threw on a NOS kit, slicks, and stickers without first building up the engine/internals. Looks like they better go see Toretto.

  • pressed it to hard wasent even hooking up

  • Poor little rice motor. That's what happens when you try to copy American Muslce! Btw that engine looks stock. What you do buy some slicks and stickers and a 200 NX kit and try to spray it on a stock bottom end? Forged internals don't break like that... dumbass ricer!

  • @ladygodia

    My friend's little KA24DE can handle about 450RWHP before having to upgrade internals. 2JZ-GTE's can handle close to 1000HP with no work on the bottome end.

  • @ladygodia You know what else happens when the japanese build performance cars, you get a Mitsubishi Evo x with a 2.0 that can go around a track faster than a viper or corvette, but i guess you "Muscle car" fans wouldnt know any thing about a track with turns, you can have fun at the drag strip where it takes no skill :-)

  • @austin32m what track? a Hot wheels track? Those car are slow as hell. Stop comparing them to vehicles that outperform it with these xbox Forza facts.

  • @austin32m BTW, mitsu is crawling in more debt than chrysler... You'd be lucky to see future evos.

  • @austin32m hahahaha ur retarded. muscle cars cant take turns? your compairing a 1970's car to a modern car...how about you compare a old ass 70's datsun or mazda to a Muscle car like a charger R/T or a Cobra?

    no istead you compair new cars to old right? pussy. lets look at some modern american cars like a Ford GT, Mustang, Vipers, Corvettes etc... try and compaire some shit like a nissan 350z to it hahaha. and dont even say a skyline they aint legal! and will cost 40-250K to get one legit.

  • @CemetaryGatesML i bet you drive a mustang cuz you put it in there with the other REAL cars.

  • @gambrazzio6989 no actualy i dont, but a mustang actualy is a very good car. plenty of power and handles more then good enough for the street or track, especialy if you get the "ford Racing Suspention from the dealer installed for an extra 2K or so.

  • what a horrific engine bay, where is the engine its all tubes and plastic

    cant imagine why it blew up though

  • OMG that kid sounds like the freakin ShamWow guy. "The piston is supposed to be right here..." Thanks for pointing it out Columbo, I was under the impression that all Z's were supposed to do that. *facepalm*

    & he's lauging cause he knows dadyy is gonna buy him a new engine, or car. 'Hehehe, can I has more naaaws daddy? Pweaze?' Spoiled kids... never learn how to appreciate a decent car, or the money put into it. A shame really.

  • how can u be laughing while ur z just got blown

  • tune your nos timer you ricer and you will run 9's

  • now me and my mad scientists have to tear apart the block and replace the piston rings you fried

  • these guys sound rich

  • why is this dude laughing? If I blew my ride I wouldn't be happy at all.

  • just bad builders not the motors fault

  • not enough nos!

  • sucks!

  • looks like your forced induction psi was to high lol

  • I honestly don't think domestics or foreign cars have a real big advantage in reliability. Can't tell you how many vids I've seen of hondas, chevys, fords, toyotas, etc. blowing engines badly. IMO, it's really determined by the driver and owner of the car. Change your oil regularly with good oil, watch engine fluids, don't push too much boost or compression, and don't rev the shit out of it regularly.

  • fuckin pussy comments below...go big or go home bitches

  • He blew the welds on the intake

  • Cars are not for you. Go buy a bicycle. FAIL

  • If you wanna play, you gotta pay. That's racing for ya.

  • You My Friend make nissan look BAD nissans dont need nos just turbo and nice goin on spraying to much out the whole dumbass buy a honda if you want to spray nos

  • Nos kills. Don't do nos kids.

  • "iss da tappa da cannectin raad, da pistin is sapposta be right hee-uh."

    awesome.

  • hahahahahahahahaaha

  • Not one mention why they were suprised it blew.

  • with what dual port?

  • holy shuit that engine did blow up !! DAMN!

  • lol i love watchin this stuff... ricer explosions are great

  • I call it fried rice.

  • thats why you dont spray with stock internals lol.

  • and u know it's stock internals how ?

  • well if its not, then thats more to laugh at.

  • lol good point !

  • LMFAO carburetors better

  • waht.... you are retard dude....

  • @KLONIME1001 no i am not just watch the video its a rice burner i mean yea EFi is good but carburetor is better i believe in raw power i mean lets say a 350 small block with a Holley you dont have all that computer stuff making it shut down at like 92 94 mph

  • @drew9595 are you serious? carbs better? and raw power? you mean slow power? you show me any muscle car and I'll show you my Supra that will bury it and embarrass it so badly he'll sell his car and buy a Supra to feel like one of the cool kids. Only muscle car I've ever has beat me was a Supercharged Cobra with a shit ton of work done to it, and he only beat me from a dig, and he barely beat me. From a 40mph roll I ate him alive.

  • @darksniper1982 good for you. would you like a cookie? . . . please , continue to brag about your "super dupra"

  • hell yeah like my 305 in my firebird its got tbi so its electronically controlled and once i slam it to the ground it stalls after 4700 rpm i hate that shit carburetor is better without the computer running safety on it

  • Wow. This is what happens when throw a turbo on to a motor without building the bottom end. That connecting rod looks stock!

  • "Improced Cranchouse Ventilation" ICV, the newest in tuning fashion..

  • ricer as!

  • 1:43...... thats what she said

  • lol thats like perfectly in that hole... great.

  • 0:45 is that the shamwow guy?

  • they r laughing at the beggining lol. i wouldnt be

  • A real crappy way to end a day at the track.

  • fucking Nos

  • how high was the boost ???

  • exactly why ill never buy an import. i dont care how many miles they go for, or how " reliable " they are..... its all poorly designed and styled crap.

  • right, dont buy an import since you wont be able to afford one. any car would get wrecked if it gets abused...unless you got some magic imaginary car. its amazing though how much sales they make for import cars :P

  • @motorhead11345

    And how exactly are domestics superior in terms of reliabilty and design?

    Answer me that.

  • ROFL!

    Clearly not up to date with automotive news?

  • having NOS in a car tends to push the engine to limits its not desinged for.. Usually people who run Nos in their cars ends up blowing some engine part relatively soon..

  • its not called NOS goddammit! its nitrous, N2O, dinitrogen monoxide, anything but NOS! ffs man, stop gettin ur vocab from friggin Fast and Furious, everybody knows its a shit-ass ricer movie! and thats the opinion coming out of a Honda lover!

  • I'm sorry Mr Know it All but " NOS " is the appropriate acronyms for the word NITROUS its also a name brand for audio components and a popular energy drink.. so how bout you learn something..

  • Lol you said it was a ricer movie...

  • Its funny that one guys shows you a broke rod and another guy points out something blatantly obvious. "look at this. it exploded this off." You have bigger problems than an intake pipe popping off.

  • repair?

    i dont think so. go for a new engine... lol

  • It must have been expensive repair.

  • I NEED SPONSORS IN MY LIFE

  • poor z R.I.P.

  • When you spray, you pay!

    Nitrous likes to bite you in the ass

  • i can bet my life that the motor went lean before it blew. I can tell the sound of a lean motor better than i can remember my name.

  • That's what happens when you don't tune correctly haha, Morons.

  • wow they fucked that shit UP!!!

  • I don't know how they can be so content after... I would by screaming and cursing if I blew and engine. lil punks lol's.

  • It really pisses me off to see young punks with extra nice cars beating them to pieces like this. Hey, you don't care about your car? Give it to me!

  • If it makes you feel any better I'm a young punk that takes better care of my car than most adults.... lol

  • Wow, not only do you trash talk someone, but you show your greed.

  • To be honest, you couldn't pay me to drive a punked up car like that. Nothing screams "punk adolescent" more than a rice burner on steroids.

  • looks like a legit nismo... if he has the money to own one, he probably has the money to repair it.. that car was probably NOWHERE near stock.. and when you modify stuff like that, shit tends to blow up.. one of the perils of modding

  • seriously. hes does not know how to shift wow.

  • garbage ass nissan on nitrous lololololol

  • u drive a neon

  • aluminum blocks are weak unfortunately....light, but weak.

  • he rode the shit out of the clutch from first to second

  • Don't cry, mom will b uy ya another one

  • lol right dude if i blew a motor id be so pissed, not like "omg look at me i blew my shit up"

  • @roscoe85cj This was a shop car you fuck tard.

  • @roscoe85cj wish ur mom was that rich huh

  • dont u switch that things with some expinsive stuff when buliding a drag car??

  • and this boys and girls is wi u shouldnt put nitrouse on anything

  • thats a shame :(

  • LMFAO stoopid tinfoil Datsun - they're STILL Datsuns!!

  • I guess this is why you don't see many 350Z drag cars : P

  • lmao!

  • yea um thats why you dont fucking bounce it off the limiter like that.......dumb asses

  • thats what you get for putting it on steroids... no nitrous...

  • These dudes ruined a 350z and they don't even care... assholes haha

  • The launch was not good!..and whats with the shifting too early into 3rd gear?! it seemed like when he shifted into 3rd, he sprayed when the engine rpm's was already too low due to the early shifts!..

  • lawls i liked that evo

  • hahahahahaha wat a tard he should learn how to shift a damn gear corectly!!!

  • it might hav been the nitrous to gasoline ratio. too much nitrous

  • That's what my guess is.

  • Those weak rods should have been changed to some billet rods when it got the nos installation.

  • dumb ass didn't install rod bolts or what

  • lol ima big Nissan fan but damn that shit is funny

  • 0:36 kafoo

    haha

    awesome when it's not your car!!!!

  • Ok, I'm a bit confused. Everyone says the engine blew because he was running too much nitrus. What shot of nitrous was he running? All I saw were the nitrous solenoids.

  • he launched good

  • Its the Vel Satis engine

  • Well, look at the bright side. It's an opportunity to do MORE and BIGGER and BETTER. A blown engine is just an excuse to do more. What times was it capable of? Got a friend witha 13 second Sentra and it's not even on NOS or a "forced diet". Nissan does some good cars...

  • holy SHit

  • ok ok put's nice blow..

  • Expecting it not to blow apart? With that much nos im surprised the whole engine didn't blow up.

  • its called nitrous

  • Thank you for correcting me but i say nos!!!