@jensleeuw you need to manually adjust servo connecting rods to make the swash plate totally level. Make sure to set the trims to center before doing that
hi ali..i hve crash my belt cp v2 1st time..i hve replace the feathering shaft,main shaft,flybar,ring link push rod and main blade...but after i repair my belt cp didn't stable when i'm hover it..could u help me how to seting my belt cp to make it back stable...could u give me some video n tip how to setup my heli after my 1st crash..
hello alishanmao i was wandering why is it that when i turn on my tx and then try to plug in the heli, it does not connect?! it seems like if i turn on the tx the little red light only flashes for less then 3 seconds.. does this mean it only allows me 3 seconds to connect the heli??
I good thing is to use a voltmetter (digital) and not discharge the battery more than, 11.5 volts because they get bad if you discharge them lower than that.
Take the main rotor blades off. inside the holder there are nuts at both sides. that means both main blade holders are tightened with one bar inside its a two way screw and both sides have one nut. Take those nuts out, and pull the holders out. replace the holders or see if that bar is bent. straight it out, put everything back in. you need special tool to get those nuts inside holders out ;)
Just got the metal upgrade for king 3. damn it handles a great deal better now. And i'm flying with tail carbon blades from the t-rex 450 as i was told to do from a friend. Great response on the tail and almost no trimming needed. i will post a video soon of the upgraded king. Ps artech shark 2 carbon edition flies with the same parts as T-rex 450 perhaps it's a better choice compare to the price. 305 dollars with 2.4 ghz stick.. i'm gonna have way to much heli's at the end hehehe
:) well said. But Hold on till I introduce a new 3D Heli to all viewers. that thing beats TREX on stock RTF Setup. I am gonna get metal version. Cheaper than ArtTech Shark and comes with 2.4G and a full metal case for both heli and radio ;)
Hi: I have a belt cp and started loosing control of the tail. changed my gyro for a locked one and now does not seem to recognice any radio, can you help me? by the way, nice videos.
How come mine dosen't fly like that ;-) Seriously, that's some great flying. Are you using the stock woodies? I tried to do 3D with mine (a backflip from very high), put it in acro idle up, and went for it. However, it seemed like i was on really low control throws. It complete the flip, but hit hard on its gear. Anyhow, is there anything i need to do from stock to get this to 3D? (other than a new brain lol) Thanks!
this one is total stock, nothing modified. yes I agree negative pitch on this heli sucks, even positive and negative are not much. So doing flips or other 3D requires you to push the throttle up and down to its limits then you get a response. as there is no radio setup for Pitch Curves increase or decrease. So yes its a slow bird, I'm loving Honey bee king 3. its very agile when doing flips n stuff. I am not a good heli pilot man, still learning. My skills suck :D LOL. thanks
Great flying!! Wondering if you're gonna get the EFlite Blade mSR?? I have one and it screams with agility and blazing speed. I would like to see what you can do with that 8 inch heli.... Please post a video if you get one. Also, check out my mSR if you get a chance..... Just search erwin15erwin & you'll see my mSR videos.........
well i have a belt cp v2 and i am scared to fly it because the first time i did it went skidding to the right and the rotors got chipped and so now im wondering weather i should try and find a proffesional or just tryb again my self plus i am also scared the system needs adjusting or something and i might not know till to late
I do have some items: can you give some explain about the controls. On the vids, we only see the heli during flights, not the radio.
I faced that the sticks are not comparable with cars. If I release the cars dir.stick, the car wil go back to "drive straight".
But If I release the elevator and aileron stick. the heli wil continue flying in that direction. If I start a flight, I (beginner) have trouble to get the heli back in hoover situation: trouble with landing.
Yup, and back in closet in pieces LOL crashed it badly yesterday LOL. It flew well, then gone crazy. When I came to inverted Hover, it started spinning like a god damned fan LOL i controlled it that way inverted spinning fan for 30 seconds then tried to bring it back to normal hover to land but bird just loved to kiss the ground lol. Will have to repair it again. thats life ain't it :D
Loving the videos Ali - one question - what is better, the CP V2 or the King 3? I have been flying an Esky Hunter to learn and now want to upgrade. Anythoughts would be appreciated!
well it happens. things give up sometime :) thing is it wasn't my fault at all. I actually kept that spinning inverted hover for 30 seconds trying to get it back to normal hover LOL but damn you should hear that sound when it hits the ground LOL
Very nice to see you flying heli Ali. Well hope this time you can keep it in good condition and not crash LOL. Well nice video and can't wait to see more take it easy man peace.
LOL Crashed it badly today. Gyro simple gave up during inverted flight Heli was just spinning like hell for a while in the air then Crassssssssshhhhhhhhhhhh. Repairing it again.
Hi i just got a quick question, How do you fly the helicopter uppside down what is it called and how do you do it?:)
mjfanforever89 1 year ago
thx, you always help me very good.
greetings from the netherlands!
jensleeuw 1 year ago
hi, nice job.
I got a question about my belt cp v2.
When I trim it all to the right front, it still goes left back. Do I have to ajust the bars or servo's in the heli?
thx,
J.Woestenburg
jensleeuw 1 year ago
@jensleeuw you need to manually adjust servo connecting rods to make the swash plate totally level. Make sure to set the trims to center before doing that
alishanmao 1 year ago
I have this heli too. Very nice.
MrRCgamer 1 year ago
hi ali..i hve crash my belt cp v2 1st time..i hve replace the feathering shaft,main shaft,flybar,ring link push rod and main blade...but after i repair my belt cp didn't stable when i'm hover it..could u help me how to seting my belt cp to make it back stable...could u give me some video n tip how to setup my heli after my 1st crash..
nuwaNur 1 year ago
@nuwaNur PM me with details of what is going wrong at the moment and I can guide you
alishanmao 1 year ago
hi could you tell me what battery this heli takes and if i was to get an upgraded battery would one should it be.
SHAKESPEARE10 1 year ago
@SHAKESPEARE10 max, 11.1v 2200mAh
25C :) fits in
alishanmao 1 year ago
hello alishanmao i was wandering why is it that when i turn on my tx and then try to plug in the heli, it does not connect?! it seems like if i turn on the tx the little red light only flashes for less then 3 seconds.. does this mean it only allows me 3 seconds to connect the heli??
HCRcloud 1 year ago
@HCRcloud maybe you need to rebind the radio to receiver
alishanmao 1 year ago
This has been flagged as spam show
Hi, alishanmao, i watched one of your another video there you said i love esky gyro helis etc, and here you said
if its not ESKY, its better heli my man :)
Didn't understand, as i already order one for me ;)
thengalele 2 years ago
@thengalele that time i loved it, but now I found better helis. ESKY helis are still good for their price range :)
alishanmao 1 year ago
my batt keep on going puffy. i just buy 1 yesterday charge it and fly for about 10 min take the bat out and it puffy why?
seahunt1980 2 years ago
Use 11.1v 2200mAh 25C battery and do not fly more than 6 minutes ;)
alishanmao 2 years ago
thanks my bad
seahunt1980 2 years ago
batt spec is same but over play ok thanks
seahunt1980 2 years ago
I good thing is to use a voltmetter (digital) and not discharge the battery more than, 11.5 volts because they get bad if you discharge them lower than that.
3frvill 2 years ago
I got the carbon Belt v2... great heli:)
Ourparkour 2 years ago
Anyone know how to remove the part that holds one of the main rotor cause mine is bent and i am definetaly not gonna fly it that way
blackhawk438 2 years ago
Take the main rotor blades off. inside the holder there are nuts at both sides. that means both main blade holders are tightened with one bar inside its a two way screw and both sides have one nut. Take those nuts out, and pull the holders out. replace the holders or see if that bar is bent. straight it out, put everything back in. you need special tool to get those nuts inside holders out ;)
alishanmao 2 years ago
yeah thats now a problem( do you know the name of the tool because i dont see how
blackhawk438 2 years ago
i think they are called socket ranches
alishanmao 2 years ago
I think they are called Socket wrenches
alishanmao 2 years ago
I bought myself a socket wrench 3.5 mm. that ' ll do good.
3frvill 2 years ago
Just got the metal upgrade for king 3. damn it handles a great deal better now. And i'm flying with tail carbon blades from the t-rex 450 as i was told to do from a friend. Great response on the tail and almost no trimming needed. i will post a video soon of the upgraded king. Ps artech shark 2 carbon edition flies with the same parts as T-rex 450 perhaps it's a better choice compare to the price. 305 dollars with 2.4 ghz stick.. i'm gonna have way to much heli's at the end hehehe
kochanje 2 years ago
:) well said. But Hold on till I introduce a new 3D Heli to all viewers. that thing beats TREX on stock RTF Setup. I am gonna get metal version. Cheaper than ArtTech Shark and comes with 2.4G and a full metal case for both heli and radio ;)
alishanmao 2 years ago
Be sure to send me an mail. when you do cause i want one.....
kochanje 2 years ago
drop me an email on my ali at redcatracing com
alishanmao 2 years ago
Talking about better helicopters, what do you think about the storm 450 heli
blackhawk438 2 years ago
if its not ESKY, its better heli my man :)
alishanmao 2 years ago
Hi: I have a belt cp and started loosing control of the tail. changed my gyro for a locked one and now does not seem to recognice any radio, can you help me? by the way, nice videos.
3frvill 2 years ago
check the connections :)
alishanmao 2 years ago
How come mine dosen't fly like that ;-) Seriously, that's some great flying. Are you using the stock woodies? I tried to do 3D with mine (a backflip from very high), put it in acro idle up, and went for it. However, it seemed like i was on really low control throws. It complete the flip, but hit hard on its gear. Anyhow, is there anything i need to do from stock to get this to 3D? (other than a new brain lol) Thanks!
parkfly27 2 years ago
this one is total stock, nothing modified. yes I agree negative pitch on this heli sucks, even positive and negative are not much. So doing flips or other 3D requires you to push the throttle up and down to its limits then you get a response. as there is no radio setup for Pitch Curves increase or decrease. So yes its a slow bird, I'm loving Honey bee king 3. its very agile when doing flips n stuff. I am not a good heli pilot man, still learning. My skills suck :D LOL. thanks
alishanmao 2 years ago
Great flying!! Wondering if you're gonna get the EFlite Blade mSR?? I have one and it screams with agility and blazing speed. I would like to see what you can do with that 8 inch heli.... Please post a video if you get one. Also, check out my mSR if you get a chance..... Just search erwin15erwin & you'll see my mSR videos.........
erwin15erwin 2 years ago
So i should stick to my king 3.. i've gonna order a T-rex 500 esp but still love the king 3
kochanje 2 years ago
TREX are the best my man. That thing will kill ESKY in seconds
alishanmao 2 years ago
Is the Belt cp v2 better than King3? i know they come with almost all the same parts. The engine is smaller on the Cp. what do you think
kochanje 2 years ago
Belt CP V2 = big = more stable = easier to control = slow in aerobatics
King 3 = Small = Fast = Agile in aerobatics = still easy to fly
alishanmao 2 years ago
well i have a belt cp v2 and i am scared to fly it because the first time i did it went skidding to the right and the rotors got chipped and so now im wondering weather i should try and find a proffesional or just tryb again my self plus i am also scared the system needs adjusting or something and i might not know till to late
blackhawk438 2 years ago
You will need a simulator to practice first. :)
alishanmao 2 years ago
Hi Ali,
Great flights!
I do have some items: can you give some explain about the controls. On the vids, we only see the heli during flights, not the radio.
I faced that the sticks are not comparable with cars. If I release the cars dir.stick, the car wil go back to "drive straight".
But If I release the elevator and aileron stick. the heli wil continue flying in that direction. If I start a flight, I (beginner) have trouble to get the heli back in hoover situation: trouble with landing.
thanx
basiser 2 years ago
email me with your questions
alishanmao 2 years ago
when I got my belt cp v2 u told me the battery ran for 5 minutes what battry can i buy to get longer flight time if any?
blackhawk438 2 years ago
11.1v 3200mAh 25C or 30C from any other brand but ESKY
alishanmao 2 years ago
Nice one mate and it's great to see the heli's back in the air ;-) 5*
startazz 2 years ago
Yup, and back in closet in pieces LOL crashed it badly yesterday LOL. It flew well, then gone crazy. When I came to inverted Hover, it started spinning like a god damned fan LOL i controlled it that way inverted spinning fan for 30 seconds then tried to bring it back to normal hover to land but bird just loved to kiss the ground lol. Will have to repair it again. thats life ain't it :D
alishanmao 2 years ago
Loving the videos Ali - one question - what is better, the CP V2 or the King 3? I have been flying an Esky Hunter to learn and now want to upgrade. Anythoughts would be appreciated!
eddfsf 2 years ago
Both are good Helis. CP V2 is bigger so its easier to control. But King 3 is like fast and more agile to do 3D :)
alishanmao 2 years ago
i really prefer playing gas powered RC stuff. Cars or planes.
they give you a better feeling
and motor powered stuff gives you this crappy feeling
Naturepheonix 2 years ago
agree :) but crashes on gas powered are fatal and fatal for pilots too cuz pilots get heart attack seeing that much money going away LOL
alishanmao 2 years ago
i mean fueled engines not electric powered.
:)
i agree that nitro planes are faster.
Naturepheonix 2 years ago
Man thats sad to hear but I know you will get it fixed cuz your Ali and your the man with a plan LOL. Peace out.
bobdude2360 2 years ago
well it happens. things give up sometime :) thing is it wasn't my fault at all. I actually kept that spinning inverted hover for 30 seconds trying to get it back to normal hover LOL but damn you should hear that sound when it hits the ground LOL
alishanmao 2 years ago
Very nice to see you flying heli Ali. Well hope this time you can keep it in good condition and not crash LOL. Well nice video and can't wait to see more take it easy man peace.
bobdude2360 2 years ago
LOL Crashed it badly today. Gyro simple gave up during inverted flight Heli was just spinning like hell for a while in the air then Crassssssssshhhhhhhhhhhh. Repairing it again.
alishanmao 2 years ago
hahah aw man that sucks good luck fixing it
RcUniverseGuy 2 years ago
cool beans! now you have to hover under a jump and have someone jump over it with a redcat truck
mxf7010g8k 2 years ago
thats what is my plan. problem is, I m the drive i m the pilot :)
alishanmao 2 years ago