Added: 3 years ago
From: Geco180
Views: 186,304
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (170)

Sign In or Sign Up now to post a comment!
  • I did not get any of the things you did in step 3. Can you please sub back and give a clear explanation? thanks

  • mine is solved!!!

    

  • just watch dan browns version

  • Solved! Thank-you.

  • alright, I am now stuck on the last step, right when im about to finish, i fuck up.........I hate u erno Rubrik.........so much

  • I'm still wondering how you don't mess up the bottom. Still confused about the inverted part too.

  • ok, i seem to fuck up, on the third step, what should I do if the corner is in the right place but the colors are not (blue is in on the red side and red on the blue) seriously im about to throw this thing out my window.........

  • I know you have tried your best to make this vid so congratz of how great this is, although the Rubik's cube is very hard after all.

  • Aaaaaargh that music is dire!

    It's the sort of music you would get in a waiting room, before doing an interview for a job at a Corporate Company.

    Great helpful video though.

  • this is so ******* frustrating. Im going to play counter strike

  • wat do you mean the line has to be "oriented"

  • what about a "T" for the final layer?

  • sum shit video

  • you don't fucking get how many fucking videos i went through god sent me here like Jesus disciples! thank you god!

  • i dont know what U FI R L UI or any of that! so make a video with our the alphabet on every page

  • @kyledminer I explain it within the first 30 seconds of the video!!

  • Comment removed

  • Lucatn's method is far easier and he explains everything for you, and even does the "what if" situations... this version has no vocal guidance whatsoever... just a bare one or two turns and he does it... he doesn't do the algorithms either... this was a crappy video... sorry, no guidance, no alternative scenarios, no nothing... this is basically RESTATING the INSTRUCTION MANUAL that comes with the cube...

  • What's the music being played right now?

  • @noobsauce Howard Green: Secrets & Sighs

  • @Geco180 thanks!

  • i give up since 1:07

  • Great video. Only thing that annoyed the crap out of me was the damn classical music!! So I hate to mute it while watching it haha

  • @MonDog07 Yeah I've been meaning to change it. Thanks for watching!!

  • @MonDog07 What genre of music do you think would best fit?

  • @Geco180 This music is much better! And thanks to this vid I can now solve it! Thanks again :D

  • Well, i just keep ending throwing the damn thing against the wall.

  • Bad video!!!

    

  • @NikD7 your just mad u couldnt solve it i solved it on the first try ha

  • u really helped me even though i watched it like 50 times it still helped

  • @StevenP409 Cool man! Thanks for the comment!

    

  • YES!!!

  • Guys if you want to show off to your friends who DO know how to solve the cube then learn the Petrus method its alot cooler than this method

    But its kinda hard to understand if your a beginner

  • im getting to the last algorythm but its not work ing what do i do

  • @thatperson231 are you making sure to turn the top layer to start a new corner?

  • its hard

    

  • @oinkoink767 ikr! i still cant solve it!

  • this is an okay tutorial, but it doesnt explain everything

  • Watch @pogobat s tutorial, its the best

  • @ColdweekAH if you watch pogobats vid, write down the algorithms, & then watch this vid, its the same exact method. I agree that the pogobat tutorial vid is the best, that's how I learned to "beginner solve". I did get my hands on the dvd that comes with the actual rubiks cube & the speed record holder teaches some advanced moves. i incorporated those advanced moves into pogobat's method and i can solve in just under 2 minutes. still not as fast as i want but its def. worth checking out.

  • @kaijustorm Yeah I orginally learned from Dan Brown (Pogobat) and then made this vid. In the next few weeks I will be posting a new vid with a different, faster, method of solving the cube.

  • WHAT IS ALL THAT ******* UI L1 Di things?!?!

    I DON'T UNDERSTAND

  • @Filibastis Watch the video

  • @Geco180 i did that several times but i still don't understand

  • @Filibastis No problem, sorry if it wasn't clear. The "i" associated with any side means that it is counterclockwise (Assuming that you were looking at the side in question)

  • @Filibastis Were you able to figure it out? I'd be happy to explain if you need

  • Name of the music please

  • when i finish 1 layer of the cube eg:- yellow.the 2 opposite corners will be left

    how to fix this problem. i even get the cross properly

  • @TheTejas104 The problem you're having means that the remaining two corners need to be flipped. At this point your cross should be correct so your good in that regard but the only thing you need to do to fix your remaining to corners is move one of the corners to the bottom layer, then put it in its proper place. See 2:25

  • fuck this man, ima have 2 come back 2 it a dif time, you confused me at step3, you kept turnin tha cube while twistin it and idont feel like learnin what symbols mean what haha, but shyt ibeen on this for a hr (not on this same vid tha whole time tho)

  • wat dis Di D etc notation mean??

  • @MrSmithdawda you're retarded. it says in the beginning of the video. Di is the down face turned counter clock wise. D is the down face turned clockwise. learn how to read instructions

  • wat dis Di D etc notation mean

  • the Li should be L .. i wasnt able to do that step w/o messing up with the Li..

  • on the step where you place the corners in the correct place but not match the colors yet

  • thanks

  • I've learned it from a friend :D I won't understand this video if I didn't knew how to solve it.. but I'm not english so... ;D Well good luck everyone who tries :P

  • Of Course I Get To The Last step And Fuck Up. Now I Got To Start All Over Again.

  • what do they mean by "not assembled correctly"??? I do it all up to the top corners and then it gets really messed up... please help!!!!

  • with the solved face of top, this will also get you the F2L

    (left) D,L,D,Li,Di,Fi,Di,F

    {Right}Di,Ri,Di,R,D,F,D,Fi

  • The 2 steps to solve the Rubik's Cube:

    1. Go to shop

    2. Buy new cube.

    Yea! U R AWESOME!!

  • Lkkkkk

  • Okay, but dude what does it mean by corresponding how do u do it?

  • I cant do it. No matter how hard i try I JUST CANT! Im going to go to sleep now...

  • I can't get the step 3 :/ dont know what you mean with right and left sequences

  • so... i can get the two layers done, but once i get to the last part there is no cross, dot, or line, or L

  • oooooooooooooooooooooooooooooo­ooo idiottttt

  • What does ui fi di mean

  • well i dont FUCKING believe it!!! i FINALLY SOLVED THIS MOTHER FUCKING THING!!! FUCK YES! ABOUT FUCKING TIME!! IM GONNA GET SO FUCKING DRUNK RIGHT NOW!!!!!!!!!!!!!!!! FUCK!

  • @8bjs Nice dude!

  • @Geco180 LOL

  • @8bjs that is some funny shit!

  • @8bjs FUCK YOU!!!!!! :-)

  • @8bjs 0_0 u high bro?

  • i hate posers, btw dans vid was better than this 

  • please add me on facebook Derek san joaquin

  • Friderich method uses 4 steps

    Cross

    F2L- solve first 2 layers at the same time

    OLL- orient entire top layer ( make top face yellow)

    PLL -permute entire top layer (makes it so pieces around the top layer match)

  • See I never get ANY of these videos cuz A. They use big words I can't understand B. They don't explain things very well and C. I'm one of them ppl who need to be shown what to do many times cuz my mind blanks easily

  • i just took the stickers out n replace them ..dumb proff

  • @lavaling sure, if you did that, you wouldnt be able to put them back on

  • @Skitzo520 umm. yes i can. why you ask? becuz i just did..n beside i can always use glue

  • ..dude thanks for the help..

    it's been a nice tutorial...!!!!!!!!!

  • O.o

  • Thnx i knew how to do it but then i forgot now i remember

  • i downloaded this video..!!!

    WOW U R MY RUBIK's CUBE TEACHER NOW!!!!

    :D

    i still hav a problem for the last stage T_T

  • rosamunde overture background music.

    funny i should bump into it as im playing it in school now

  • i wud rly like it if you made a vid for your intermediate method. i can use the beginners method easily so plz plz plz :D

  • this is fucking bull fucking shit, the ri, ui, di, and li, thats just the opposite of the r,u,d, and l it fucking contradicts each other, if you move the r clockwise and it tells you to do an ri, you will just move the rfucking right back to where it was ITS FUCKING STUPID

  • And it's comments like this that just goes to show how logistically and intellectually people fail....

  • You are incredibly, amazingly STUPID, now go back to sucking your own tiny penis.

  • can you make a note pad doc and put dow in just words what to do at what point?

  • my best time has been minute and twelve seconds.

  • mine's a minute and 21 nicenice

  • I still can't figure out how to do this! I need help! Lol!

  • mee tooo i can solve on face but from their i just cant

  • omg this is the only video that actually helped me and i finally remembered how to solve the cube!! all the little hints and tips definately helped =] thanks so much!!!

  • I simply cheated...

  • I just take the stickers off

  • lol

  • it's easy to solve a rubex cube

  • I think a video on an intermediate method would be great. I currently use the beginner method and average around 1 min 5 sec. Right now I'm looking for a way to cut that down.

  • i keep doin the 7th step but keep getting the top layer mixed up

  • OMG! I thought I would NEVER solve my rubiks cube. Once i got the whole notation thing it was EASY! Thanks so much. It took a little while, but i eventually got it.

    Thanks again! xD

  • I can't solve it with a solved corner on the last step

  • Are you making sure to do ALL of the turns in the algorithm (sequence)? and then turn the top layer?

  • Haha, it turns out my cube wasn't assembled correctly. I took it apart, reassembled it and, BAM!, it worked!

    Thanks!

  • cool!

  • lol. look you idiots even if he is "copying" its helping us out more for the people who havent watched Dan Brown. So quit being five years old and be considerate.

  • U JUST COPIED DAN BROWN

  • I used the same method as him BUT the way in which I made my video and conveyed the strategy to solving it was different. So in essence I only used the method he used but I did not "copy" him.

  • Isn't it cheating if you come up with a predetermined plan on how to solve it?

  • actually it isn't because you have to solve it the same way every single time

  • not true you can sight spot it like the guys who do it in a few seconds

  • minchia mi stavo addormentando, però bello...

  • good explanation i dont have the patience or focus never did i like the sticker trick my self but the damn stickers were cheat proof and would stick wrong or bend and break etc love this song though

  • You can take the cube apart by turning the first layer 45 degrees and then taking out the middle piece. I would do this opposed to trying to take off the stickers. Just let me know if you want or need some help on the cube if you do find some time and want to learn the technique.

    Joe~

  • music is great, what is it?

  • It's one of the metamorphosis songs by Philip Glass.

  • i cant do step 2. its too confusing.

  • Comment removed

  • or take the stickers off and put them back on so all the colours match x

  • good job man i have a video of solving the rubiks cube too. If u want chek it out.......

  • one i am not a guy i am a girl and i said nothing about that that was my friend

  • Ok then, sorry for yelling at you

  • too confusing:(

    i don't know how to do it.

  • I can help if you want

  • no dude u r stupid no 1 wants ur help

  • This coming from the guy that only has videos of horses on his page, dumbass. And by the way how does being able to solve the Rubik's cube make you stupid?

  • do u r alsome thank u for doing it nice and slow peace out

  • read the discreption ;)

  • hey wats the piano song called

  • they're in the info

  • wat the hell? so confusing T.T

  • when it say's high quality it say's i have to download the video.dang my computer or you you tube i know ur watchin

  • despressing music?

  • I have tried for months now to do this darn thing, and failed. Now that i watched this movie, I have already done many times, thanks very much for this video.

  • Comment removed

  • Comment removed

  • Comment removed

  • Assuming that you are solving the white side first, make sure that each of your white face pieces has a correct corresponding side color.

  • yea.. im stuck on step 2 lol

  • That's a tricky step, lemme know if you have a specific question so I can help you out

  • Yaaaaaaaaaaaaay, I got it!! =D

    Thank you very much!!

    I love the music. =D

  • Lol! I've only just completed it!! I'm well happy!!

    I was stuck on the last step though...I didn't realise that you was rotating the top piece to correct each of the corners. I thought you actually turned the whole cube, but I got there on the third attempt....

    Thanks a lot for this video, I wouldn't have been able to do it without it!

    Cheers.

  • Cool I'm glad to hear that you figured it out! Enjoy!

  • Hi,

    Great video so far...but I'm a bit stuck on getting the remaining four pieces in order to complete the second layer.

    You show how to get them (the four pieces) in the right places if they are positioned at the top middle only, but what if they're not in that position?

    Any help would be really appreciated.

    Cheers.

  • Don't worry, I got it....well that part anyway.

  • Are you stuck at the next part or did you get it already?

  • SOLVED! THANK YOU THANK YOU THANK YOU! Great video. Music soothed me and inspired me. Been working on this cube since winter of 2007! Got it today @ 8:57pm. 5 stars bro! Tried a bunch of other methods and videos,but this one did the trick! Thanks again. 5stars, favorited and subscribed! Bravo!

  • Cool!! I'm glad to hear that you figured it out! Enjoy!

  • nice video, but i can't really get step 6, do you just do it any way?????please help!!!!

  • What do you mean do you just do it anyway?

  • thanks that help a lot it made a lot of sence i can do the rubik's cube a lot easier now

  • Cool! I'm glad I could help be sure to subscribe and friend me if you would like!

  • finally a video that makes sence, chears buddy

    all other videos are pointless unless your a nerd

  • slow, do the tutorial on rubiks website ;)

    how fast can you solve it like this?

  • Using this method, i can only get about 1:15-1:20 but with the method that I use currently I consistently get 1:05-1:08

  • oh cool whats that method?

  • I solve 1 & 2 layers with basic method, and then I solve the 3rd layer by solving all the top color and then correct the corners, and then move the middles around (H & Z perm).

  • when doing r' d' r d you can't skip the Down move even if the piece on top is solved

  • You can only skip the down move if you are solving the corners(step 2)

  • i like vid why not talk

  • I guess I could have, it may have made it easier to understand

  • I think i figured out whats wrong.. once you fix the first corner, you rotate the upper layer to the right, once youve got that corner you dont switch the layer you move the cube so that the two fixed corners are in the back and the unfixed ones are facing you. and do the sequence again, for the third corner, once that is solves turn the upper layer to the right and solve the 4th corner..

    i probably sound so confusing, but i think what im trying to say is correct :)

  • No actually what you are saying makes a lot of sense, at least to me it does. The corner that you are changing the orientation of always needs to be in the bottom right(assuming you were looking at the cube from the top.)

  • this is awesome, great instrutions. one thing thogh.. the last step never works for me. I always make sure the corner pieces are in the correct position and i do the step slowly to make sure iam doing it right... but when i finish all my other pieces are messed up.. any ideas why??

  • This is where everyone messes up, I would suggest double and triple checking both 1st and 2nd layer pieces, as well as the 3rd layer middle pieces. Then after doing this I would very carefully do the Ri Di R D algorithm NOTE:When doing this algorithm make sure that you are actually doing Ri(towards you), Di(to left), R(away from you), D(right)until that corner is correct.

  • good vid! But i fuckin´ can´t position the last layers corners right !?!?! please help me.

  • i get caught on the underside step help me?

  • Sure, what do you mean by the underside step?

  • I average 40 secs...hehe =p...but i started out solving the cube with some help and this was one of the videos i watched

  • Cool! Thanks for the comment!

  • Mine is 2:17

    But it was with a different method..

    I think this one is quicker