Borg-Tech: custom marker case

[Rubst3r21]

Hey that exact case you're using, where did u get it? Cuz I have an a5 with a stock too and the cyclone feed on side so I needed a decent length and width

[Snakebiteloo]

a drywall saw works pretty good on most types of foam too

[pitchjr77]

rip borg :(



[guns4life1000]

thanks

[TheAdjectiveman]

you can cut the foam with a hot knife, but you must be in a open ventilated are with a respirator. also as a side note the foam will "shrink" around were you cut it so cut inside the lines

[itsover80]

Dude how did u get so nig on youtube for a paintballer and how can i?

[44Tapout]

if you make me one like yours, i pay you. :) dead serious tho. i love it.

[ThatsNoMo0n]

what kind of paintballs do you use?

[franklinflyers28]

where are you from?

[paintborg]

@franklinflyers28 Croatia, Europe

[paintborg]

@paintballer123100 i don't use that case any more, so i don't know...

but you don't need the dimensions, you just find the case that is big enough, to hold your marker in...

[dietwaffles]

amazing videos Borg

[SensHockey101]

@paintballer123100

i believe the flatline is 8.5" or 10"

[kogeny]

exaclty at 0:16 is the thing below it a loader and how do you make it?

[paintborg]

@kogeny it's a Q-loader, you can buy it, look for Q-loader vids..

[zer0243]

If it the roll-mat can be found any hikers bag, do you reccomend stalking hikers and when they least expect snatch their mat?

[seattlepaul11]

@zer0243 i think he dose wait... yes now i have a good reason to stalk them lol

[apieceomeat]

you should make a video on how to make your own RED DOT SIGHT. that would help many ppl and save them cash

[Talroth]

Personally I would use something other than the white beaded foam, either a close cell foam (like blue/pink insulation board), or a rubber foam more like the camping mats.

The white stuff is just nasty to work with, and it gets in everything. And be careful with vacuums, it is a great way to melt a motor.

A tip for cutting flexible foam is to take your template and then compress the foam under it. Then use a sharp razor to cut cleanly through it.

[SuperBoarman]

wow..dude nice vid..great idea...so gonna do that..thanks so much

[YorkshiresYoungGunz]

dude you should sell these i would buy one and can you make a vid about your marker what you bought to make it the way it is etc

[paintborg]

sorry, i don't sell the stuff that i make...

and one day maybe i'll make a vid of my marker upgrades...

[IrishJimmyB]

can you bring paintball markers on the plane with you?

[dkdavid721]

i dont think so... u have to put them in in the checked baggage and even then u have to tell them that u have paintball equipment in the bag and also... u cant bring an air tank.. not even in the checked bags

[IrishJimmyB]

damn. any tips on how i would get my gear from CA to NY? lol

[dkdavid721]

u can bring everything except ur air tank.. and once u get to NY u'll have to buy a new 1... hey its a good excuse to upgrade if ur moving permanently...or u could drive.... that would take a while though

[IrishJimmyB]

k ty i was planning on gettin a new tank anyways

[13dogman13]

whatch the tchpb video

[jrcfoxtrot13]

@IrishJimmyB yah but it just has to go in the under docks and YOU CAN NOT TAKE A TANK WITH YOU

[IrishJimmyB]

yeah you can, i scuba, and when i go on a plane with my gear all i have to do is take the reg off the top

[jrcfoxtrot13]

yah i already knew that but that kid probaly wouldnt do that and end up getting in trouble so i just told him no

[IrishJimmyB]

lol that "kid" was me, i asked earlyer if you can take your markers on, i didnt know if you could take the acual gun on, if it was a threat or something

[jrcfoxtrot13]

no the marker they wont care YOU MAY HAVE ABIT MORE OF TROUBLE WITH A TIPPMAN THAT LOOKS JUST LIKE A REAL GUN but like speedball guns noo

[joker12187]

i mean stirafoam

[joker12187]

wat could u use if u aint got no bubble wrap and cant get some?

[Dman42911]

borg i got a question. im thinking of starting to make videos and i would like to know how do you get the camer above the gun like that? I've been trying to find out and i can't get it

[wazerzeke]

Use a camera mounted on your rail?

[gintaf]

where could i get a case that size?

[Penchek76]

Hey man do u know where I could find a case that will fit my alpha black? Then do you know I could get the stuffing. It would be great if u could help me out. Peace out. Its penchek76.!!!!!!!!!!!

[paintborg]

dude, i'm from Croatia,Europe, how the fck would i know....

[Tofher3]

LOL

[skiierboy01]

woah! i've nvr seen u swear before.

[zero0928]

haha

[locknesspb]

how about u look your self dude u r lazy.

[SychoAirsoftSquad]

dude it has ur username above ur comment u dumb fuck

[Penchek76]

I know r tard. U such a maget sack

[UhomieU]

hey borg, great videos! after watching all these inventions, ive gotten the inspiration to like my 98 custom again... im subscribing!

Any way you could make a stock?

And even for the 98C?

[xXxtwizkidxXx]

i can't get no sleep ...

god i love this song and im glad to know i'm not the only paintballer to listen to techno/electronica xD

[Sn0manX]

dude i love techno!!!

[Pownage24]

Borg awsome video one can only imagine what goes on in your head. Bye the way one of my friends has an invert mini and is trying to figure out a way to make a sling so when he is running he can easily connect it to his mole vest without it wobaling around. The only thing is all of the ideas he has tryde either have it swinging around as he runs or there are just to many straps and it takes to long hopefully you could help him out if you have any spare time on your hands. Keep up the good work =)

[DrunkPaintball]

Hey Borg what is the name of the song that starts at 2:48?

[paintborg]

all of this is just one song,

Faithless:Insomnia

[DrunkPaintball]

thanks i found the remix on itunes so im happy. ;D

[sn1p3f0rv1ct0ry]

dude im so tired i almost fell asleep watching this but nice finishing project

[Joao1241]

good job borg

[OnlyInhuman666]

nicely done Borg

[max93b]

were did u gett the pading from under the marker?

[Stj035]

sweet i rated 2 by mistake sorry

[DumbLuckPaintball]

I love this design. So easy, cheap, and effective. I'm in the process of making one of these for my PMR. I'll let you know when I finish.

[pyrostuff]

i have that pack its the best

[westpyroairsoftboy]

how do you make the one you have

[chrissearle]

borg - you are actually a genius

[uruguay704]

hey man i admire your vids ..there great i wanted to know ... i have a bravo one do you know where i can get an e grip?

[paintborg]

you have internet, do some research..

[polaris6191]

at the beginning of this video what is the thing around c02 canister?

[paintborg]

my custom tank cover...

[polaris6191]

o ok just wondering if it was something awesome like all ur other inventions

[paintborg]

no, it's just some stuff i found in a dumpster at work...

[watafak4]

how's music name?  sry my english

[paintborg]

Faithless:insomnia

[Lastesina]

You're really smart man, thanks :)

[fighter199212]

i will make one for my mepop im a lan-partyfan have oe weekly so it will be well used

[knifeinthedark6]

i deff would not take that to the airport ur logo would look like a terrorist cell insignia to me if i dodnt know wut it was

[uneedballstopaintbal]

how long did it take you to make your tippmann one?? how much would it all cost all together?

[paintborg]

it cost's me only $6 for styrofoam, i found the case in the dumpster...

[dubhummer75]

u should paint the case and put ur logo on it

[saucy2727]

how much does this all cost in the end?

[paintborg]

it cost's me only $6 for styrofoam, i found the case in the dumpster...

[saucy2727]

nice i found a case in my basement so im going to make one :)

my timmy will love you after its all done

[waerta]

IT LIKE HITMAN MUSIC

[irishkreem]

did you have to cut the styrofoam for the gun section too?

[paintborg]

no, you just put your marker in an oven, heat it up, till it becomes red, and put it on the styrofoem, and it will melt the styrofoam in marker shape...

the other method is to put your marker on the styrofoam, and run a car over it, few times, till marker is fully pressed in the styrofoam...

just kidding, yes, you have to cut the styrofoam for gun section...

[captace15]

LMFAO i bet he believe u for the oven part

[GIlfinater69]

borg you should make a video of all your paintball guns ive always wondered what all you have

[scottishconnor14]

he has 2 tippmanns and 3 spyders =]

[chewydude4]

ummmmm you said u can find it on the back of any hiker's backpack, not hiking backpack, so if u stole it off some hikers i applaude you

[EagleofTorment]

Wow, awesome vid, man. Inspired me, i'll probably make my own case now for my X7 :) Thanks :D

[madrespex]

what song is that? :)

[paintborg]

FAITHLESS:insomnia

[NadeCandy]

Thanks,I`m still looking a marker to buy,when I get mine I will make a vid and send it to you,let me l know what you think!That is when I get my marker

[paintborg]

ok, just send me the link, when you upload the vid

[NadeCandy]

How long did it take to make this?And how much did you spend on supplies to make it?

(If you don`t have all of that stuff)

[paintborg]

the case i found in garbage! try at yard/garage sale..

$5 for roll mat and $5 for Styrofoam

it took me about 3-4 hours to make it, because it has so many holes, and i had to make so many templates..

[buttbuster99]

that would be sweet dude. i mean even if u found a labor job over here you would pull in 10-14 an hour and could live good of that.

[buttbuster99]

well save up for a bit and try dude it wouldnt hurt. you dont want to spend the rest of your life hating where you live thats for sure. and like i said i would bet that you could find a job fairly fast, expecially since u know how to do aluminum work. shit i could find u a job right now probably starting u out at 15-19 us dollars an hour.

[paintborg]

thank you, for wanting to help...

i'll see...

[buttbuster99]

do you like it in croatia man? you made it sound like your stuck and dont realy like it. i mean i know for a fact that you could move over around where i live and find a good paying job and get a nice apartment for cheep. then you could realy start up a buisness and sell to all of your subscribers. haha just an idea that and i would get to play ball with the legend. nice case btw

[paintborg]

yes, i don't like it, but it would be expensive and impossible to move to the States, and i don't think i can get a Green card....

i have shitty job, that pay the bills, i'm not hungry, and if i save on food and clothes, i can afford to buy paintball stuff....

[Jdclarke117]

1. How did you trace the gun without the pen hitting it? 2.How long did it take you? 3.what if you dont have on of those hacksaw things? how would you cut the styrofoam then? Yes.....Ino i ask alot of questions. Thx

[paintborg]

1. the same way i traced the 50rnd hopper in the vid

2.4-5 hours, i can't remember..

3.click on the link at the end of the vid, and see...

[Vekk33]

Hey I would so buy a marker case off, you but I think it would be hard for you to make one if you don't have my gun lol anyway I got a Tippman alpha black. Your a very nice craftsman! Keep up the work...

[tbs419]

This is tight but it almost seems like it isnt worthe the time and effort unless you dont have acess to any paintball store

[paintball311211]

dear borg i found a case that i really like and i have all the stuff to make the case but my barrel is to long even if i turn different ways it still wont fit is there some way it can fit or could u make a vid on how to add extra packs on the outside of the case  Nick

p.s. i made bipod

[paintborg]

remove the barrel from the marker, and store it in the case like that.....

[pabl2224]

dude. just store ur barrel somewhere else and when ur going to the feild carry it seperatly. jeez

[paintball311211]

but i want it in the case

[paintballboy97]

i like all of your videos! can you please show us how to make a home-made scope?

[paintborg]

thanks!

i tried to make scope, it didn't work....

[paintball311211]

i did that and it still wont fit

[paintborg]

so get a bigger case...

[Thuundar911]

*Subscribing"

[Thuundar911]

dude this stuff is wicked... but will it cost more than buying a simple gun case?

AND do they make those 50 round hoppers and stuff for a 98c

[paintborg]

get a used case from garage sale or 2nd hand shop...

50rnd hopper fits any cyclone feed, so if you have cyclone feed on your 98c, it will fits...

[PatPaintball]

wow u are way to fn smart. Im subscribed

[paintborg]

thank you for subscribing! make shure to tell your friends about my videos...

[PatPaintball]

I will. Im also thinking about making some vids myself so ill def recomend you there.

[paintborg]

thank you! and be sure to send me a link to your vids when you're done...

[neon4901]

Oh thats a real smart idea again. and its too bad you cant pay off all that stuff. But still if you have a chance give it a try man. And if you have time please make a video showing us how you make ur fiber glass design.

[neon4901]

Yo Borg iv'e just seen some of your videos today, but i believe you can make this go farther. You thought of idea noone else can i think with some money you can make a company named "Borg-Tech" and make things and sell them.

[paintborg]

that would be cool, but i'm stuck in Croatia and i don't even have the money to patent some of my my stuff, and sell the patent...

to start my own company? maybe if i win the lottery....

[fischerskidude]

well if u start small like on a website people in croatia and america will buy your stuff. If u made a business i would buy your shroud because it looks awesome and is probably cheaper than the $100 Shrouds in america. So I think u could start a small company for a low price if you can set up a website.

[paintborg]

i don't have money to start my own company,

i don't have enough money to buy a car!

yes, i'm 32 and i don't have a car... :(

[neon4901]

How did you make your symbol and how did you think of it?

[paintborg]

the simbol is from PC game:Quake2, i liked it, and i make it from fiberglas...

[BadIdeas101]

uh, srry, meant to say where did you get the fine saw thing?

[paintborg]

i had mine for long time, here, you can buy it in shops that sels model airplanes,ships, cars...

[BadIdeas101]

what do you use to cut the foam?

[paintborg]

fine saw taht i also used to cut styrofoam...

[unvolution333]

what are the measurements for the case you used by the way

[Logan04]

great vid. going to be makeing myself a custom case now too. one question though did u have andy problems with the tape and styrofoam because i know that glue and styrafoam dont mix well? other then that great job and keep it up.

[Paintballer1015]

nice vid im goin to do that

[csskiller]

I love your vids!

Making stuff is always better than buying it.  (Much more fun, not mentioning the money saved)

=D

[paintborg]

and feeling proud when someone ask you where did you get it from...

I MADE IT!

[sniping]

Great tutorial! Keep up the good work

[paintballsp1]

Thats great and awsome.....i want to try to make that. Nice invention or creation.

[paintborg]

i used 3 layers of styrofoam for the case, "hole" for the marker is cuted through 2 layers of styrofoam, and where the cyclone feed is, i also cuted through the 3rd layer, for the barrels, i just cut through one layer

[uncooltaquitos]

you are really cool

[TehShame]

I would be cool if you spray painted the outside black...Lol!

[paintborg]

good point, i will do that.

[TehShame]

Cool!

[kill811]

im definantly making one i just need a role mat and some stiraphome

[harrowlax28]

makin this too

[paintborg]

can't wait to see..

[robvanengeland]

this is great like all the other mods keep them coming :p

[DivxRipPimp]

Whoever gave it less than 5 stars is lame...

Awesome video, PERFECT explanation of EVERYTHING... Awesome as usual!

I know its annoying, but ANY sorta explanation on your cover/strapping system for the top of the case would be badass :-D

[Killacide911]

wow. amazing. very detailed. good job.

[TheChosenNoobling]

yo this is great thank now ineed to top that it not going to be easy

[lovr3]

whatś the last song

[paintborg]

Faithless: Insomnia(mix)

[marceloutsch]

Very good!

Nice and easy explanation!

Isn't easy to make, but compensate by the all around protection!