Automobile air pollution, automobile noise pollution, day after day. Puppets of the oil / automobile / asphalt industries, free yourselves. Stop the criminal industrialist destruction of the environment and our health; protect future generations. CarFree . com -- FreePublicTransit . org -- BicycleCity . com -- PostCarbon . org -- StopTarSands . org -- TransitionVoice . com -- TransitionUS . org -- ClimateProgress . org -- Grow your own food.
Looks like he had too much downpressure and wasnt paying attention. the drill rod pushed down too hard and picked up the rig, then the weight of the rig bent the rod and it tipped over
Thank Llama for using our song on a vid that has got over 1 million views. Couldn't ask for more. If your in SoCal come to the Doll Hut April 15th for our show, contact us to let us know your coming and we'll bring something special for ya.
only a complete dope could put a rig over,.he should have know the ground he was on and know the displacement specs for that rig, Bauer give you all the spec you need for all there machines so the ground should have been compacted to the right KPA for that rig, there's no excuse for tipping any machine over only operator error.fucking doppy cunt should be made to pay for it....no i don't own rigs but i do operate them and cranes.
@docktergonzo1 that is a bauer BG25 or 28. It has a safety feature in the cab where the operator pushes a button while he tracks the machine. This self-levelling feature keeps the mast plumb so there's no way the weight of the rotary drill head can pull the machine over like it did this one. That specific drill head weighs over 5 ton but being up so high has a lot of leverage and is equivalent to more than 10 ton up there. More than one degree of the mast in the forward direction is enough.
I never heard of a piler drill but what kind of dick drives with the hammer thing elevated, first thing you learn when ofsiding let alone operating I hope this idiot learnt his lesson.
@venomn100 You obviously don't know how these machines work venomn. They have that specific rig set up in CFA (continuous flight auger configuraton. When they are set up like that the auger string hangs below the rotary drill head so no way to bring the rotary down before moving the machine to the next pile position. The only way to prevent this kind of accident is for the operator to ensure he has a piling platform certificate which guarantees that his work area is well compacted and level.
@tanishatania NO NO NO NO When moving a rig the mast has to be in the "traveling" position.
This is OBVIOSLY not a fixed mast, look at the end of the day I wish he and you and every other cockroach die a horible death. stay off of heavy machinary and die,
die die die die die die die .
I love watching these accidents becouse eventualy somone dies , dont talk just die
@tanishatania dig a hole you fall in no, wht a dick. . you stick a carrot up your bum and a donkey eats your arse no?lol, by the way only a retard falls in his own hole
@venomn100 You obviously don't know how these machines work venomn. They have that specific rig set up in CFA (continuous flight auger configuraton. When they are set up like that the auger string hangs below the rotary drill head so no way to bring the rotary down before moving the machine to the next pile position. The only way to prevent this kind of accident is for the operator to ensure he has a piling platform certificate which guarantees that his work area is well compacted and level.
Most pile hydraulic pile driving rigs I've seen turn over were not on mats. These rigs are very top heavy with the hammer and pile in the air. These rigs also need to close to level.
@highway445 huh?that doesn't make any sense.i work with drill rigs.we do piling and caisons.usually if piles are going into the ground they are driven with a crane and a vibratory,not a drill rig.maybe pre-drilled and then driven with the hammer by the crane.
@bern1417 It is called the continuous flight auger system (CFA) where a long auger with a hollow stem is drilled into the ground, Concrete is then pumped through the auger as it is withdrawn from the hole leaving the concrete in it's place. A reinforcing steel cage is then lowered into the concrete and vibrated down with a vibratory hammer if needed.
The Gulf of Mexico BP oil spill is an environmental end of day’s bomb if the oil contains substantial iron and the surface water shows an increase in acidity. The acidification of the oceans indicates that the water is capturing atmospheric carbon and produces some carbonic acid. The air interface over a strong carbon sink would even slightly burn the eyes . A elite geologist John Martin stated in a speech “give me a tanker of Iron and I will cause the next ice age”.
my husband works on a production rig in huntinton beach.. and i have a bro inlaw who works on drilling rig...ruffnecks have a dangerous job i dnt care wat ppl think..they do
The info said luckily the operator leaped from the driver. Safety would have dictated he was wearing a seatbelt. The cab looks o.k. Leaping could have been the worst. Unless the operator wasn't wearing his belt was thrown and when he wrote up his accident report he put down he was wearing it but he thought better he unbuckle and leap. Still a nono. Good old cheap immigrant labor. Si I run one in mexico. I run from one from cops and border patrols I run from everything. I run alot.
If it has a seatbelt osha requires you to wear one. That goes for forklifts etc. The weight of these can turn over so fast and predicting what will crush you that jumping out and getting out of the way is more dangerous. Get certified and see what you think you know. And if you notice the cab is fine.
It's one of the most dangerous jobs there is. Things DO break, and even if it doesn't roll over, the parts fly off at great velocity. Hard hats are a necessity and sometimes that is not enough.
These are the easiest machines to fall as extremely top heavy, seems to me he had the boom to far forward at the top as he was travelling & when he stopped the weight took over pulling him forward.
No acttully i agree with dibby59 .. the derick is very top heavy because of the blocks, and the tongs, and they go down super fast, and back up super fast,(not like super speed, but you get my point.) and when they come back up it rocks the entire machine, and my guess of what caused the accident was he was sitting ontop of a large object, such as a rock
Its a drill rig rigged up to do cfa piles. There very tippy and its apparent this guy made a hugh error. I've run these machines up in canada for about 5 years
correct term would be "boring rig" i think. and if you think that is bad, look up the Shand incident where a crane building a power plant fell over and landed on an occupied crew shack!
Same thing happened to my crew a few years ago with a Bauer BG 9: Dry silty soil, you could easily walk on it. But a meter beneath the surface there was one mud cavity left. We hit it while heading to our first pile, towered up with casing and auger, the track punched through and that was it. Fortunately the rotary drive fell on a bunch of old tyres and the tower itself came down just beside an occupied mobile toilet...
that's actually a telescopic leader rig called a Bauer RTG. Not sure which one this is, but they can drill and switch "heads" and vibrate pipe and sheet piles in, too. Judging by the pics of it laying on its side, that's CFA drilling. (deepdriller100 is right).
Hey Motors69, it's NOT a water well rig. Repeat: NOT a water well rig. Don't flame unless you know the facts.
would need a better look at the mast but saying that it looks like a pile driver how ever i do note it has a 300 diameter CFA attached to the side of the mast most probable to pre drill for the pile to be driven into.another i noticed how at the start of the video the cat head was lifting as he was driving the hammer this should not have happened and if this was the case it most probably caused the acc as with the hammer there is no foot at the end of the mast to support it.
Typical MALCOLM DRILLING CO. METH INDUCED MISHAP......at least they didn't kill anyone THIS TIME. I f Malcolm Drilling shows up on your jobsite ............RUN LIKE HELL !
@snedie69er it is hard to say it looks like he tracked foward as he was drawing up the hammer and with the weight of the hammer rising so fast the foward motion would be enough to send it over,but its hard to say.that is the best ans i can come up with from watching it over and over again.regards niall
Thanks for the response. I actually saw one of these drilling rigs a few days ago in my city, and when it was travelling forwards the dill does seem to sway forwards and backwards quite a lot.
As you said, if the hammer was in motion it would no doubt add to this affect and topple the whole rig.
The filmer had the intelegence to set up his camera because he could sense that there was something wrong with the picture he was seeing. It was obviously too windy to operate that crain on that day
Its feed from a security camera you dolt, thats why it always lists the time and date in the corner, and is looking almost completely at a parking lot.
"Luckily the operator was able to leap from the falling drill rig and no one was seriously injured"
Talk about 'luck' leaping from equipment when it tips is the worst thing you can do. The cabs are designed to keep the operator safe and leaping you take the risk of being crushed to death. Even equipment as little as warehouse forklifts can crush and kill a operator.
Forget about jumping from the cab.... the whole accident could have been avoided if he hadn't crawled the rig with the boom fully extended like that. I don't know how they do things in Huntington Beach, but in New York City there would have been a crew working with him and that tip could have killed all of them. The operator clearly shouldn't be running a drill rig.
Play Poker around the globe! Thousands of Poker players are thrilled to play at Fulltiltpoker com! Beginners use the interactive tutorial and the English support is second to none. Register now and double your money up to 600$ with the Referral Code JUSTMORE! Americans welcome!!
Ha! Ha! I think he tried to go down that incline you mention at 1.00 but he should have been towered down. You can get away with driving towered up on flat ground...but its still dangerous. If you go on an incline towered up, you are just asking fall over.
This is spooky. I live in Hong Kong, and one day I walking along throught the living room and there was a massive explosion from outside. Scared the shit out of me. Apparently, an enormous construction crane dropped one of its concrete balancing blocks down about twenty stories, blowing up a chemical truck. (no it's not BS).
its a pilling rig kruizinby. i have been working with one for the last 4 months in brisbane. no idea how he tipped, the ground looks flat enough. couple of million down the drain!!
Yeah right thanks - not worked around those or seen one b4. Yeah it's weird how he went over but I bet he shiiiiit himself lol! Just seems strange that even walking the rig it was counter weighted, or seems like it wasn't.
Something like this rig is very stable especially on flat ground! Looks like the driller tried to tram (walk) with the rear out rigger still in place!
well it looks like the drill hit some sort of gas pocket under the soil and that cause a sudden upward force followed by a huge vacuum so it sucked the rig back into the ground and so on its like having a super bounce ball attached to a rubber band.
and no i dont give a shit if that what really happened! but that is what i want to thinkhappened so thats the way it is :) please correct your records acordingly lmfao ;)
This has been flagged as spam show
Alliance SEAA POY Entry HDV
With two inch clearances massive bridge is lifted
youtube.com/watch?v=s4fDDzrRL0w
RDIGlobal 1 month ago
wooo.. he's lucky..
lovelplants 1 month ago
it wanted to play dead.
GayBoyRunning 2 months ago
Accident Operator Almost Kills Rig.
MrCriticOfAll 4 months ago
This has been flagged as spam show
Automobile air pollution, automobile noise pollution, day after day. Puppets of the oil / automobile / asphalt industries, free yourselves. Stop the criminal industrialist destruction of the environment and our health; protect future generations. CarFree . com -- FreePublicTransit . org -- BicycleCity . com -- PostCarbon . org -- StopTarSands . org -- TransitionVoice . com -- TransitionUS . org -- ClimateProgress . org -- Grow your own food.
gregjalbert 4 months ago
huh, there's your problem, if you zoom in it says "made in china" underneath it.
FlyingSpartan 4 months ago
Must've worked for Halliburton
bigET1988 5 months ago
This has been flagged as spam show
looks like it was a complete accident that nothing to do with pressure you dumba sses....it was simply california dumb asses
kirstenlaplante 5 months ago in playlist land rig
looks like it was a comlete accident that nothing to do with pressure you dumbasses....it was si ply california dumbasses
kirstenlaplante 5 months ago in playlist land rig
Looks like he had too much downpressure and wasnt paying attention. the drill rod pushed down too hard and picked up the rig, then the weight of the rig bent the rod and it tipped over
altrock182182 5 months ago
that was a rad clip love the shot a day style until the crash nice work
011001er 7 months ago
Thats a carton.lol
JUSTICESEEKR 9 months ago
Thank Llama for using our song on a vid that has got over 1 million views. Couldn't ask for more. If your in SoCal come to the Doll Hut April 15th for our show, contact us to let us know your coming and we'll bring something special for ya.
Thanks
Bass Whore Sean
WhoresOfTijuana 10 months ago
This has been flagged as spam show
405 people don't like to pee in a cup..
jdm199 10 months ago
405 people don't like to piss in a cup..
jdm199 10 months ago
only a complete dope could put a rig over,.he should have know the ground he was on and know the displacement specs for that rig, Bauer give you all the spec you need for all there machines so the ground should have been compacted to the right KPA for that rig, there's no excuse for tipping any machine over only operator error.fucking doppy cunt should be made to pay for it....no i don't own rigs but i do operate them and cranes.
MrBonkers96 10 months ago
How do you topple a drill rig on flat ground??
docktergonzo1 1 year ago
@docktergonzo1 that is a bauer BG25 or 28. It has a safety feature in the cab where the operator pushes a button while he tracks the machine. This self-levelling feature keeps the mast plumb so there's no way the weight of the rotary drill head can pull the machine over like it did this one. That specific drill head weighs over 5 ton but being up so high has a lot of leverage and is equivalent to more than 10 ton up there. More than one degree of the mast in the forward direction is enough.
tanishatania 11 months ago
I never heard of a piler drill but what kind of dick drives with the hammer thing elevated, first thing you learn when ofsiding let alone operating I hope this idiot learnt his lesson.
venomn100 1 year ago
@venomn100 You obviously don't know how these machines work venomn. They have that specific rig set up in CFA (continuous flight auger configuraton. When they are set up like that the auger string hangs below the rotary drill head so no way to bring the rotary down before moving the machine to the next pile position. The only way to prevent this kind of accident is for the operator to ensure he has a piling platform certificate which guarantees that his work area is well compacted and level.
tanishatania 11 months ago
@tanishatania NO NO NO NO When moving a rig the mast has to be in the "traveling" position.
This is OBVIOSLY not a fixed mast, look at the end of the day I wish he and you and every other cockroach die a horible death. stay off of heavy machinary and die,
die die die die die die die .
I love watching these accidents becouse eventualy somone dies , dont talk just die
venomn100 11 months ago
@venomn100 you dig a hole you fall in it yourself no?
tanishatania 11 months ago
@venomn100 you dig a hole you fall in it yourself no? Point a finger at me you have three pointed at yourself
tanishatania 11 months ago
@tanishatania dig a hole you fall in no, wht a dick. . you stick a carrot up your bum and a donkey eats your arse no?lol, by the way only a retard falls in his own hole
venomn100 11 months ago
This has been flagged as spam show
@venomn100 You obviously don't know how these machines work venomn. They have that specific rig set up in CFA (continuous flight auger configuraton. When they are set up like that the auger string hangs below the rotary drill head so no way to bring the rotary down before moving the machine to the next pile position. The only way to prevent this kind of accident is for the operator to ensure he has a piling platform certificate which guarantees that his work area is well compacted and level.
tanishatania 11 months ago
underground parking structure. what a dumbass super or egineer who decided to not look at whats underneath first.
hotTOAST078 1 year ago
gosh....these machines must be so damn expensive!!!beads of sweat of your forhead if this is your fault. :D
GIwillo 1 year ago
thats what happens when you jack off mother earth
eman20083421 1 year ago
this is why you always tram boomed down.unless you aren't travelling far and the terrain isn't crazy uneven.
bern1417 1 year ago
haha the whores of tijuana?
DodoooDilysss 1 year ago
transformer =P haha
qwerty4569 1 year ago
Most pile hydraulic pile driving rigs I've seen turn over were not on mats. These rigs are very top heavy with the hammer and pile in the air. These rigs also need to close to level.
highway445 1 year ago
@highway445 huh?that doesn't make any sense.i work with drill rigs.we do piling and caisons.usually if piles are going into the ground they are driven with a crane and a vibratory,not a drill rig.maybe pre-drilled and then driven with the hammer by the crane.
bern1417 1 year ago
@bern1417 It is called the continuous flight auger system (CFA) where a long auger with a hollow stem is drilled into the ground, Concrete is then pumped through the auger as it is withdrawn from the hole leaving the concrete in it's place. A reinforcing steel cage is then lowered into the concrete and vibrated down with a vibratory hammer if needed.
tanishatania 11 months ago
@tanishatania i'm aware of what it is,like i said i work with drill rigs.what does that have anything too do with what i said?
bern1417 11 months ago
it's so boring!
DrDedoVerde01 1 year ago
so the guy just started the engine and started driving off?
XeanoProductions 1 year ago
This has been flagged as spam show
The Gulf of Mexico BP oil spill is an environmental end of day’s bomb if the oil contains substantial iron and the surface water shows an increase in acidity. The acidification of the oceans indicates that the water is capturing atmospheric carbon and produces some carbonic acid. The air interface over a strong carbon sink would even slightly burn the eyes . A elite geologist John Martin stated in a speech “give me a tanker of Iron and I will cause the next ice age”.
H2onE2 1 year ago
my husband works on a production rig in huntinton beach.. and i have a bro inlaw who works on drilling rig...ruffnecks have a dangerous job i dnt care wat ppl think..they do
101esther 1 year ago
Alrighty. Next video, a dog sleeping. Stayed tuned for more action...
LocalDogRescue 1 year ago 2
@LocalDogRescue cant wait
jrbehrje 1 year ago
is this a john n puder/ moretrench rig ratoutfit lol fl
twisterapp 1 year ago
ni tos
sergioalv62 1 year ago
This has been flagged as spam show
IowaArmen 1 year ago
sucks !
anonymouswriter22 1 year ago
Isn't this Manhattan Beach CA. ????
jeramieboo74 1 year ago
@jeramieboo74 Huntington
skevo9 1 year ago
Thanks for introducing me to a cool song!
HalfLifeAMD 1 year ago
Thats a Bauer RG rig with Vibrator and pre-drill...
SP2333 1 year ago
@SP2333 That's what your mama said !
HAHAHAHAHAHAHAHAHAHAHAHAHAHA.
hunter69denys 1 year ago
Comment removed
SP2333 1 year ago
jakij ja TUPIJ!!!!
gromozeldin 1 year ago
WTF, pictures is sooo 90's..... :)
freddyah 1 year ago 2
@freddyah Honestly... it's like a Powerpoint.
namesarenteverytube 1 year ago
The info said luckily the operator leaped from the driver. Safety would have dictated he was wearing a seatbelt. The cab looks o.k. Leaping could have been the worst. Unless the operator wasn't wearing his belt was thrown and when he wrote up his accident report he put down he was wearing it but he thought better he unbuckle and leap. Still a nono. Good old cheap immigrant labor. Si I run one in mexico. I run from one from cops and border patrols I run from everything. I run alot.
krrrruptidsoless 1 year ago
@krrrruptidsoless i find it unlikely that the operator would be required to wear a seat belt while operating the machine,
macchesney 1 year ago
@macchesney
If it has a seatbelt osha requires you to wear one. That goes for forklifts etc. The weight of these can turn over so fast and predicting what will crush you that jumping out and getting out of the way is more dangerous. Get certified and see what you think you know. And if you notice the cab is fine.
krrrruptidsoless 1 year ago
@krrrruptidsoless not only OSHA but it's an ASME standard as well.
natosuperman 1 year ago
You have to. OSHA
krrrruptidsoless 1 year ago
nice slide show!
lol vid FAILS!
brandon052695 1 year ago
It's one of the most dangerous jobs there is. Things DO break, and even if it doesn't roll over, the parts fly off at great velocity. Hard hats are a necessity and sometimes that is not enough.
zippywebgenie 1 year ago
gay
vinesboyseventysix 1 year ago
ground 1 pile driver 0
braposo23 1 year ago
its a timelapse not laggy
youta32 1 year ago
really laggy video
xxdannyr 1 year ago
it is a camera, set to take a photo every 2 minutes. you really thought the clouds could move that fast?
OzzyPowers 1 year ago
you got to be kidding me?
ihor69 1 year ago
HB surf city usa
answercalls 2 years ago
These are the easiest machines to fall as extremely top heavy, seems to me he had the boom to far forward at the top as he was travelling & when he stopped the weight took over pulling him forward.
Dibby59 2 years ago
@Dibby59 ..right on....just lower your boom when you move....or lower it half way......he learned the hard way....learning curve...lol
ozziairlegger 1 year ago
a rig doesnt just turn over on flat ground like that i dont care whose runing it somethin must have broke
rangerman2237 2 years ago
No acttully i agree with dibby59 .. the derick is very top heavy because of the blocks, and the tongs, and they go down super fast, and back up super fast,(not like super speed, but you get my point.) and when they come back up it rocks the entire machine, and my guess of what caused the accident was he was sitting ontop of a large object, such as a rock
NickelbackPWNS 1 year ago
Look how easy it will be to change the oil now!
accurateblaster 2 years ago 2
I hope you dont mean drill a oilwell,
NickelbackPWNS 1 year ago
thats a pile driver u dorks
souce666 2 years ago 3
This has been flagged as spam show
Watch today and Accept Jesus to be saved by him from hell watch?v=yhX7m3rF20c
watch?v=kaIidqTqtjM
watch?v=cSe_QQytorM
watch?v=Lsjk97Q57YU
watch?v=OldhHZT8FKk
watch?v=_d5HbddjrTU
\†/\†/\†/\†/\†/\†/\†/ thank you Jesus
2009ForJesus 2 years ago
Thats just the way i see it....whats the music ?
bvsgnova 2 years ago
It's on credits dude :D Whores of Tijuana - Trip
Thunderbolt1911 2 years ago
well if use saw a big drill thingy fallover ud put it on youtube so shut the fuck up
bvsgnova 2 years ago
@bvsgnova hahaha so true
raceinsnake 2 years ago
ha ha ahahah but its a fake...
jacknivedoesdemo 2 years ago
lmao where is canada it wont matter to you caus you obviously live under a rock lmao
69MrFrIeNdLy69 2 years ago
man get another fkn hobby ay
mickpunx 2 years ago
Crap
Fuel500 2 years ago
the music is like what the ppl in france and germany think is rock.
wd1000 2 years ago 2
LOL
AfroSchmuck 2 years ago
Bad music
abagoff 2 years ago
absolute shit video
colby26X 2 years ago
Good to hear he's okay, but this video was absolutely pointless.
Metzae 2 years ago
nice to know that no one died
sheepball 2 years ago 3
Its a drill rig rigged up to do cfa piles. There very tippy and its apparent this guy made a hugh error. I've run these machines up in canada for about 5 years
deepdriller100 2 years ago 2
where in canada bro?
zmackk 2 years ago
at the start of the vid i had no idea wtf i was suppose to be watching
jamariogoon 2 years ago 57
@jamariogoon I still don't.
jigglesnap 1 year ago
@jamariogoon Me neither... After the 253.658.973rd repeat i understand what was happened...
djfthecypriot 9 months ago
This has been flagged as spam show
@jamariogoon Me neither... After the 253.658.973rd repeat i understand what was happened...
djfthecypriot 9 months ago
This has been flagged as spam show
@jamariogoon Me neither... After the 253.658.973rd repeat i understand what was happened...
djfthecypriot 9 months ago
correct term would be "boring rig" i think. and if you think that is bad, look up the Shand incident where a crane building a power plant fell over and landed on an occupied crew shack!
thestuffz 2 years ago
Same thing happened to my crew a few years ago with a Bauer BG 9: Dry silty soil, you could easily walk on it. But a meter beneath the surface there was one mud cavity left. We hit it while heading to our first pile, towered up with casing and auger, the track punched through and that was it. Fortunately the rotary drive fell on a bunch of old tyres and the tower itself came down just beside an occupied mobile toilet...
Smalbop 2 years ago
This comment has received too many negative votes show
thats not a drilling rig dumbasses.. thats a fucking water well rig at most hahaha posers!!!!!!!!!!!!!!!
motors69 2 years ago
that's actually a telescopic leader rig called a Bauer RTG. Not sure which one this is, but they can drill and switch "heads" and vibrate pipe and sheet piles in, too. Judging by the pics of it laying on its side, that's CFA drilling. (deepdriller100 is right).
Hey Motors69, it's NOT a water well rig. Repeat: NOT a water well rig. Don't flame unless you know the facts.
papastryfe 2 years ago
This has been flagged as spam show
Patricia Petite anal delight - VIDEOPORNTEEN[.]COM
BEKKIGibbs6670 2 years ago
you kiss your mom with that mouth
darryldelay 2 years ago 7
@darryldelay i kiss his mother with my mouth
BrandonD1202 9 months ago
I used to live in Huntington Beach but it was like one big high school clique. I decided to move on, grow up...
plus Punk Rock is annoying
GomerDose 2 years ago
Pile Driver
timofmya 2 years ago
oh crap man, that audio preview on the right is funny xD
GTAnikoliberty 2 years ago
as a piling rig driver myself i think its a good video and high lights not every one can drive them thank god thats not me trying explane that.
niallluxie 2 years ago 17
Is this a pile rig or a drill rig?
gordo783 2 years ago
would need a better look at the mast but saying that it looks like a pile driver how ever i do note it has a 300 diameter CFA attached to the side of the mast most probable to pre drill for the pile to be driven into.another i noticed how at the start of the video the cat head was lifting as he was driving the hammer this should not have happened and if this was the case it most probably caused the acc as with the hammer there is no foot at the end of the mast to support it.
niallluxie 2 years ago
Its a Bauer pile driver with auger attached.. The TWEEKER at the controls is optional.
tubeyouermr 2 years ago 3
Typical MALCOLM DRILLING CO. METH INDUCED MISHAP......at least they didn't kill anyone THIS TIME. I f Malcolm Drilling shows up on your jobsite ............RUN LIKE HELL !
tubeyouermr 2 years ago 3
lol.
constructioncartoons 2 years ago
@niallluxie
So any insights in to what actually made this happen?
snedie69er 1 year ago
@snedie69er it is hard to say it looks like he tracked foward as he was drawing up the hammer and with the weight of the hammer rising so fast the foward motion would be enough to send it over,but its hard to say.that is the best ans i can come up with from watching it over and over again.regards niall
niallluxie 1 year ago
@niallluxie
Thanks for the response. I actually saw one of these drilling rigs a few days ago in my city, and when it was travelling forwards the dill does seem to sway forwards and backwards quite a lot.
As you said, if the hammer was in motion it would no doubt add to this affect and topple the whole rig.
snedie69er 1 year ago
Comment removed
datzfast 10 months ago
This has been flagged as spam show
stupid ass video. what a waste of 2 minutes of my life!!
wytmyk86 2 years ago
HAHA, took my 10 seconds to know it's rubbish :D
heavyaxe2 2 years ago
Huntington Beach! YAAAAAY!!!
calster31 2 years ago
This has been flagged as spam show
hey thanks you fucking jackass it aint worse than uk
cooperleeee 2 years ago
Comment removed
ianb1967 2 years ago
This has been flagged as spam show
and I say atleast its NOT TYPICAL EUROPEAN TECHNO SHIT, and I'm Canadian
Twitchy380Magnum 2 years ago
shit video
buban5 2 years ago
GAY
billykash9 3 years ago
GOOD
memix007 2 years ago
I agree with you, its absolutely not funny, its fucking hillarious.
jimoffy 3 years ago
i don't even remember posting that. i must have been drunk.
ghostmonkeyrape 3 years ago
LAWL FUNNY SHIT!!
wei00007 3 years ago
7 seconds is about the amount of time i give to a gay video of nothing happening if i don't seen some shit going dow in the first 10 im out
ghostmonkeyrape 3 years ago
Wtf are you talking about ghostmonkeyrape?? You stayed, you watched 2 times and left a thoughtful comment on this stupid shit, ya dumb cracker. :P
Seaartist 3 years ago
Go to 0:30 and you will see it fall. Most peoples attention span is 7 secs I believe so yeah just go straight to 0:30 people.
yenseca 3 years ago
WHATS THE NAME OF THIS SONG
LakeBlueStreak1 3 years ago
Thug Life - TuPac
jimoffy 3 years ago
Some people are just sick.
Or need attention.
Or both.
flyingmagiccarpet 3 years ago
wtf happened? was he retarted or something??loks like he took too sharp of a turn and fell on his side!
UsLuluandBee 3 years ago
You can't even see what happens
DetroitShadows 3 years ago
I really dig the music on this...anybody have any info?
kboy20 3 years ago
The Whores of Tijuana. read info first
mcwk1992 3 years ago
errrr what?
LarsPeter50 3 years ago
What a name of this song?
feniksgordonfreeman 3 years ago
Can you read at all?
evilelmofreak 3 years ago
The Whores of Tijuana.
mcwk1992 3 years ago
Thats a Bauer RTG rig with a Vibrator, Actually its easy to do. Believe me ive been there......
SP2333 3 years ago
This has been flagged as spam show
god bless americunts
1unitman1 3 years ago
god bless the world
DoffyElfunk 3 years ago 4
This comment has received too many negative votes show
Too bad the rig operator didn't die from the fall. That would have been funny!
clayman26777 3 years ago
fuck head i am a driller and its not fucking funny u try doing it fuckhead then see if u laugh loser
dano2727 3 years ago
oh c'mon thats just wrong
teamlawless17 3 years ago
i think i speak for all drillers out there when i say fuck off and u die!!
SeanyBloodCock 3 years ago
The filmer had the intelegence to set up his camera because he could sense that there was something wrong with the picture he was seeing. It was obviously too windy to operate that crain on that day
austpom333 3 years ago
What the hell does wind have to do with a small pile driver? Yeah it's called a pile driver not a crane you moron.
hfxdjco 3 years ago
Small pile driver... RTG25 is 80+ tons...
SP2333 3 years ago
Its feed from a security camera you dolt, thats why it always lists the time and date in the corner, and is looking almost completely at a parking lot.
Paragon19 3 years ago
it wasnt laggy its cause its not a video its loads of pictures
iffymjankowski 3 years ago
well at least the operator is still around [cant garante hell be around for any more drillin] lol
amrepmike33 3 years ago
"Luckily the operator was able to leap from the falling drill rig and no one was seriously injured"
Talk about 'luck' leaping from equipment when it tips is the worst thing you can do. The cabs are designed to keep the operator safe and leaping you take the risk of being crushed to death. Even equipment as little as warehouse forklifts can crush and kill a operator.
Ramathorn1985 3 years ago 2
Agreed,the cab is not even damaged,pretty stupid move,jumping from the reinforced cab out into a wreck in progress.
I'd bet he did not jump,I bet he did not have the door closed,or the seatbelt on.
rotundrooster 3 years ago
maybe he jumped because he didnt have time to close the door or pt not the seat belt? :0
ciupa911 3 years ago
Forget about jumping from the cab.... the whole accident could have been avoided if he hadn't crawled the rig with the boom fully extended like that. I don't know how they do things in Huntington Beach, but in New York City there would have been a crew working with him and that tip could have killed all of them. The operator clearly shouldn't be running a drill rig.
vilesmile 3 years ago
This has been flagged as spam show
Play Poker around the globe! Thousands of Poker players are thrilled to play at Fulltiltpoker com! Beginners use the interactive tutorial and the English support is second to none. Register now and double your money up to 600$ with the Referral Code JUSTMORE! Americans welcome!!
Generalkonferenzf15 3 years ago
Ha! Ha! I think he tried to go down that incline you mention at 1.00 but he should have been towered down. You can get away with driving towered up on flat ground...but its still dangerous. If you go on an incline towered up, you are just asking fall over.
Thanks for the analysis.
llama3000 3 years ago
This is spooky. I live in Hong Kong, and one day I walking along throught the living room and there was a massive explosion from outside. Scared the shit out of me. Apparently, an enormous construction crane dropped one of its concrete balancing blocks down about twenty stories, blowing up a chemical truck. (no it's not BS).
EddieTheFishReturns 3 years ago
**it happens...sometimes
llama3000 3 years ago
its a pilling rig kruizinby. i have been working with one for the last 4 months in brisbane. no idea how he tipped, the ground looks flat enough. couple of million down the drain!!
80aussiepride08 4 years ago
look at sec. 1.0... you can see a slight incline. At my company we have to tower down even if we want to move a foot.
llama3000 3 years ago
Yeah right thanks - not worked around those or seen one b4. Yeah it's weird how he went over but I bet he shiiiiit himself lol! Just seems strange that even walking the rig it was counter weighted, or seems like it wasn't.
Thanks mate.
Kruizinby 3 years ago
hm i never saw or heard about that.
BLfTy93 4 years ago
wow i didnt even new that happened and i live right next to there
cpbishurr 4 years ago
Something like this rig is very stable especially on flat ground! Looks like the driller tried to tram (walk) with the rear out rigger still in place!
I tell you he waon't be doing this again.
uni000ver000sal 4 years ago
music is cool
jdawgsworld 4 years ago
Yah, the music is by a friend of mine's band called The Whores of Tijuana. The song is called Trip Manhattan.
llama3000 3 years ago
IT fell into a rabbit hole & fell over!! So simple.
kloudzak 4 years ago 2
why did it fall over?
Nmemonicus 4 years ago 2
I think because they tried to move it while towered up.
llama3000 4 years ago
well it looks like the drill hit some sort of gas pocket under the soil and that cause a sudden upward force followed by a huge vacuum so it sucked the rig back into the ground and so on its like having a super bounce ball attached to a rubber band.
lostorfound19 4 years ago
and no i dont give a shit if that what really happened! but that is what i want to thinkhappened so thats the way it is :) please correct your records acordingly lmfao ;)
lostorfound19 4 years ago
Only in HB lol... well, I've seen worse down in south county... HB is notable for North County though lol
SentinelSoul 4 years ago
I don't understand what's happen here...
RainyCloudOfFire 4 years ago
the crane tipped over frontward right where the operator would be...
....this was just some amped up bullshit