www.Evike.com - Reassembly Guide for M4/M16 AEG

[coolbrandon92]

Intro song name?

[9B2PG]

240p... we meet again...

[stripedstriker1]

i kind of broke my gun does anyone know who i can pay to fix it

[stripedstriker1]

great so he sounds so confident about taking the gun apart so me a person who has had rarely any experience with dissasembleing and reassembleing a gun feels like they can do it so i take it apart with no problem (not the gearbox just the upper and lower receiver) but then i try to put it back together and well dissasembling the gun the spring that brings that charging handle back comes off well that didnt happen in the video so now i am left with to parts of a gun and a stretched out spring

[Maxilos9999]

Hey I did this and put a metal body on but now it won't fire and i did everything you said please help

[iceT820]

I just got an Matrix Tactical Systems M4 challenge kit, I put on the metal body no problem but my delta ring came apart and it wont go back together correctly. Does anyone know hoe to put it back together? If you can make a video because I've spent 2 days trying to put it back together. It's getting really annoying!

[tenggyteng]

I was wandering if I want to upgrade my rails for my M4 gun, which has the battery pack in the front, can I do so with the Matrix 7" Free Float Full Metal Rail?

[DELTAirsoft491]

@tenggyteng youll prolly have to get a peq box or wire your gun to the back

[socrazgrz]

doesnt go over bolt cover assembly i just got a new metal body and have no clue how the bolt cover plate sits with the charging lever

[JmLykins]

@socrazgrz What kind of metal body is it?

[socrazgrz]

@JmLykins G&P NSWC Crane the navy seals body

[JmLykins]

@socrazgrz What brand of metal body? I just got my Matrix USMC metal body and it was a booger to assemble.

[azodinfan]

Thanks

[azodinfan]

I was wondering how much different it is when you have a crane stock? Is it any harder when the wires are in the back?

[Korentokuulla]

@azodinfan

you just have to feed the rear wiring throught the hole in the back before you attach the buffer tube,

its not difficult if you were wondering

[ColdAssassin96]

thanks evike it couldnt be any more clear. and i finally know what to do with my m4a1

[fastback622]

can you make a video about how to change a body on a spr mod o

[TheGookstain]

how about a m4 s-sytem takedown?

[rootbeerisgoooood]

this sux i took my m4 apart cuz my warranty is up and full auto isnt working and i couldnt get my gearbox out and then my m4 wouldnt go back together and the wires ripped ur the worst person ever

[fanofCOH]

@rootbeerisgoooood still not able to get it running?

[animationcaptain]

@rootbeerisgoooood that's on you not the gun. from the way you made your comment it sounds like you ordered some of the wrong stuff to put in it, got rough with it and destroyed your gun. don't blame others for your mistake and not researching your gun before hand.

[claridude]

@rootbeerisgoooood so just because you were dumb enough to open your m4 up without experience he is the worst person ever? great logic

[flopmandude]

Actually, it looks to me like a classic army. Mine only needs that one pin too.

[gangatalishis]

would it be cheaper if i built my own

[DarkwaveSlasher]

@gangatalishis it depends on what parts, fuse, gear box, body, stock, buffer tube, motor, motor plate, pistol grip, battery, front end. all from evike your looking at about 300-320 but hey, its worth it to have a kick ass airsoft gun that one of a kind isnt it? always shop from evike. fast shipping and costumer service is great! they make me want to bake them cookies they are so bad ass. 

[GuitarTech94]

The description says this is a guide for a Mod-5, isn't that an MP5?

[duperman91]

can you make video on how to to install the fake bolt in the jg sr16

[dntcha1234]

do all BB guns have to be built because i'm getting an M4 tomorrow?

[xkuztomized]

@dntcha1234 no.. when you buy it as a whole... its built already but if you want to get a new Gearbox or other things

[4nicnic]

i have a dboys m4 with the jungle series cqb sd kit and i took out the barrel to clean it and now the barrel wont go in all the way. any suggestions?

[jasonjavelin]

will the same process work on a JG M4 CQB aeg? i am buying new internals for it soon and im not sure bcuz the battery is in the crane stock.

[CptnKnuckles492]

will the disassembling video work New Gen. Dboy Matrix Full Metal M16 DMR Airsoft Sniper Rifle AEG

or my

Dboy A&K Matrix Full Metal M16 Custom SPR MOD 0 Airsoft Sniper Rifle AEG

[mamaluigiwilldie123]

how do you reattach the two wires to the front to connect the battery? PLEASE ANSWER

[Osborn2run]

@mamaluigiwilldie123 They should just slide on, but if they don't you will have to tape it or sauder it so the metal pieces on the ends touch. To do that you might have to cut back some of the rubber material surrounding the metal pieces that need to be connected.

[DevastatedX]

what brand is this gun

[LAGUNA76229]

@DevastatedX it is probably a g&g

i say that because it only has 1 body pin holding together the receivers

g&g is the only company i know who does that

[klondikebar48]

what's the standard requirements to join evike competitions please answer

[BAYCITYAIRSOFT]

Ok I have everything good and I put my tappet plat on wrong all selectors spots are safe, so do you put the gear box tappet plat on semi and selector on semi then put it together or how do you do the selector switch and tappet plate part?

[FlyPie95]

is this the same for a JG s-system?

[codzilla12]

Is their anyway to remove the front iron sights on an M16 so you can put a sniper scope on it?

[BAYCITYAIRSOFT]

Remove the two pins at the base of the front sight.

[marchubkyle]

i have a question though why is 500 fps not allowed at the evike competitions

[fizel2]

because 500 fps can easily penetrate skin. airsoft guns are strong enough just to make u feel the bb not make u bleed

[6Human6Animal6]

let me answer a question with a question.... Ever loose any teeth?

[marchubkyle]

iahuvbp;ihuvb p;aeqiubw;oviuhnwQO;UIHNBRo;iq­ujr\;IjuwhWO;UHQ;

DOES THAT ANSWER YOUR QUESTION?

[lamesniper2]

@6Human6Animal6 I have. Not in airsoft but I have chipped a tooth. Hurt like a mother.

[Jakeskater9528]

@6Human6Animal6 I dont know if anyones ever lost a tooth but the tip of my front tooth was shoot off

[evikecom]

Airsoft gaming is not about having high power.

Some fields are just not big enough for it and thus dangerous, especially when there are CQB

More issues with guns (AEG)

Makes everyone wants to go 500 fps, then everyone might as well as do 400 fps.

[marchubkyle]

thanks captain morgan

[xkuztomized]

@evikecom how much is the max FPS for a CQB?

[LAGUNA76229]

@xkuztomized about 350 fps is good but it really depends on the place and their limit

[xkuztomized]

@LAGUNA76229 thanks

[monkeymaniac64]

@evikecom A testament to CQB dangers with 500 fps: I got shot in the arm and it bruised and bled. Got shot in the jaw and it out a hole right to the bone. And finally, I got shot in the leg from ~40yd away through loose fitting jeans and it let a nice welt and temporarily impaired my walking.

[PV48Z]

what brand of motor was that?

[nenaycruz]

Is this the same for a JG M4A1?

[xXgoROTinAsack89Xx]

not exactly, the instead of sliding on and off the upper receiver, the JG hinges like a real one.

Look up the Tokyo Marui M4 dis/assemble cause that's the same as a JG

hoped it helped : D