can anyone help me because when i turn on my gamecube i plug in my controller and the gamecube suddenly turns off and when i turn it on again it still wont turn on ,but when i take offf the controller the gamecube starts working again---i think its the controller ports because when i put my finger in there it starts to push back
Hey i got a Gc from my friend and im some probs with it. It has power and i put the disk in and do the other stuff, but it gives me a blank screen can anyone help!?
anyway i realize my comment was pretty dumb, dont actually light the pen on fire, just heat it up with a lighter, slowly, gradually, rotating it, until its melty. then jam it on and let it harden. if you light it on fire it will probably just melt away instead of gaining elasticity
HELP! Sometimes when I play GC games on the wii the screen will turn blue and say disc error. I can hear a wierd noise coming from my wii and then the disc stops running
when i turn my gamecube on it makes a loud noise--it will play the game but you hear this loud noise all the time---i think it's the fan but not sure-can anybody help me?
Hey man, great vid. I am experiencing this problem where when i turn my game cube on it makes a sound like a disc started spinning and stopped (even when there's no disc inserted, for about 2 secs) and then the power doesn't come on but the case fan spins there's no nintendo center in the country i live in.
so i seem to be having a problem with the read error, when i start the system some games will either not start at all or only a little bit after i start a game on Marieo sunshine it has the same error.
in 2003 i bought my first gamecube it was black. it never read the disk. & 2 weeks later it broke. in 2005 i bought a silver one. & i never had a problem with it
If the problem just started happening, give it 5 days without turning it on. otherwise you need to send it to Nintendo. If you didn't tell them the problem, then you really NEED to.
for the nintendo screwdriver you take the inside out of a pen, light it on fire for about 15 seconds, blow it out, and jam it ontop of the screw and wait
Parece ser un destornillador especialisado para cosas Nintendo, el loco dijo "Nintendo bit screwdriver"...no se, en una de esas lo conseguis con Nintendo?
hey. i gots a idea. why dont u just buy a new 1? it would be easier, wouldnt it? or sell it to gamestop, then go somewhere else and buy a new 1. it would be a lot easier than taking it a part, just cuz then u would need to worry about putting it back together the right way.
my gameqube has a weird problem when i turn it on at some point or mostly right after the power where you see the yellow thing when you always turn it on basically everything dies except the fan. lol. how can i fix that problem?
lol i would get like a apple clam shell laptop and the stick the gamecube guts in there and have a battery pack then just get a game controler take that part cut sum holes in left and right corners place it in have the plug plug into the first player spot then just a cut a hole for the other 3 players slot to stick out! ^_^
With the Nintendo GameCube, when you have a problem where the console says that it could not read the disc during play, that's usually a sign that the pickup has become thermal sensitive. In other words, when it warms up, it conks outs.
Replacement of the optical pickup is the only solution aside from exchanging it for a refurbed unit with Nintendo or buying a new GameCube.
watch the X-PLAY vid where Morgan Webb tries to destroy the 3 current-gen consoles. Gamecube is the only one that survives. Mine's all banged up and still works fine. However, it makes a noise unless I tilt it on it's side (I think it's something to do with the cooling fan, not sure.)
can anyone help me because when i turn on my gamecube i plug in my controller and the gamecube suddenly turns off and when i turn it on again it still wont turn on ,but when i take offf the controller the gamecube starts working again---i think its the controller ports because when i put my finger in there it starts to push back
17fierro 1 month ago
Hey i got a Gc from my friend and im some probs with it. It has power and i put the disk in and do the other stuff, but it gives me a blank screen can anyone help!?
Mario101Luigi 1 month ago
@CameraOpDean-I got it off Ebay. for 3 bucks it was a 2 pack
alex14northgate 7 months ago
Where can I buy one of them special nintendo bit tool?
CameraOpDean 7 months ago
@LoWmFrEaK6622 reply to a comment from 2 years ago ;)
anyway i realize my comment was pretty dumb, dont actually light the pen on fire, just heat it up with a lighter, slowly, gradually, rotating it, until its melty. then jam it on and let it harden. if you light it on fire it will probably just melt away instead of gaining elasticity
jian2069 8 months ago
@jian2069 Genius
MaDlibzZzv3 6 months ago
@PolarControls My gamecube wont show up on the screen when i turn it on.How do i fix this?
Cerebrectomy 10 months ago
those are definetly the cleanest hands ive ever seen!
THEMIGHTYNOOB45 11 months ago
My Gamecubes Disk Tray Won't Close Sometimes. The Button Is Pressed In All The Way Broken In. Is That An Easy Fix.
OfficialAmazing 1 year ago
how do i get the laser outta the dvd aparatis?
cartman33452 1 year ago
HELP! Sometimes when I play GC games on the wii the screen will turn blue and say disc error. I can hear a wierd noise coming from my wii and then the disc stops running
mustachio31 1 year ago
when i turn my gamecube on it makes a loud noise--it will play the game but you hear this loud noise all the time---i think it's the fan but not sure-can anybody help me?
marianewberry 1 year ago
my gamecube video input thing wont work only the audio would work
spidermanbwee 1 year ago
So many things to take out to get from the top to the bottom. It's like a 30 story building.
Haloce002 1 year ago
Hey man, great vid. I am experiencing this problem where when i turn my game cube on it makes a sound like a disc started spinning and stopped (even when there's no disc inserted, for about 2 secs) and then the power doesn't come on but the case fan spins there's no nintendo center in the country i live in.
what should i do?
bmwhsv 1 year ago
how could he do this to an innocent gamecube?
gooseandmooseforever 1 year ago
so i seem to be having a problem with the read error, when i start the system some games will either not start at all or only a little bit after i start a game on Marieo sunshine it has the same error.
spacecadet404 1 year ago
i just use the bic pen method for the gamebit screws.
mystiqueman366 2 years ago
can any1 help me when i start my gamecube the tv screen doesnt show i only can hear it and i had it for 1 1/2 years now can any1 help me? ty
thief41ife 2 years ago
have you inserted the av cables properly.
moronicron 2 years ago
its a shit load of work though
MajinVegeta997 2 years ago
gamecube = best console of all time!!!
nuff said
ResEvil9ty2 2 years ago 3
when i turn my gamecube it doesnt read the disk
igarci66 2 years ago
same but i beat the shit after that so now its a door stop =)
lookkoolforgirls 2 years ago
LOL!!!!!
justinium77 2 years ago
in 2003 i bought my first gamecube it was black. it never read the disk. & 2 weeks later it broke. in 2005 i bought a silver one. & i never had a problem with it
Bufa491us 2 years ago
SAME LOL, its wierd.
GatMan183 2 years ago
I got the purple gamecube bundled with mario sunshine and I never got problems with it
bouchandre 2 years ago
It's best to take the Gamecube apart with a game disc on it. It reduces the risk of damaging the lens.
nascar1998 2 years ago
don do this at all
bobwal4life 2 years ago
is me 454logan
Blubenz320 2 years ago
dude my gmacube wont turn on i pulg it in with a new ac adaptor and nothing i just hear the fans power on nothing else
andranik12 3 years ago 2
My gamecube has done that to me before. You should call Nintendo and tell them about it.
nascar1998 2 years ago
what did they tell you ????
did you fix it,what was the problem?
plz reply im not in the us right now
plz help
andranik12 2 years ago
If the problem just started happening, give it 5 days without turning it on. otherwise you need to send it to Nintendo. If you didn't tell them the problem, then you really NEED to.
nascar1998 2 years ago
i need help my gamecube say disc not read when i put my game in i try n try and i cant i clean it and nothing
darksamus388 3 years ago 2
for the nintendo screwdriver you take the inside out of a pen, light it on fire for about 15 seconds, blow it out, and jam it ontop of the screw and wait
then it becomes a screwdriver
jian2069 3 years ago 14
@jian2069 I'd rather spend the $2 to get a bit.
JerryTerrifying 1 year ago
ok my gamecube wont recognize my games....what wrong with it?
SouthwestFreak 3 years ago
what is that he's holding in 4:33 ?
its that big grey metal thing XD
Groobie 3 years ago
can anyone see my videos?
bmxer9410 3 years ago
My memory card will have a funirul one day
svilaro1102 3 years ago
damn,my gamecube memory card got messed up and it had so much memory :(
svilaro1102 3 years ago
gamecube rocks!
northeastrocks 3 years ago 7
game cube rocks!!!!!
driverg2g 3 years ago 2
ddmm thats what i dont like about the gamecube to much screws
rastabori 3 years ago 2
che como se llama la primera llave que utiliza?
45juan54 3 years ago
Parece ser un destornillador especialisado para cosas Nintendo, el loco dijo "Nintendo bit screwdriver"...no se, en una de esas lo conseguis con Nintendo?
TheGuruOfTime 3 years ago
Cool video...i defintly like the 90's style porno music.
jpmaguire12 3 years ago 3
lol!
canedog09 3 years ago
I wish someone would repair my Sega Game Gear
sugreev2001 3 years ago
whats the problem with it?
styber 3 years ago
It only shows a grey screen with no sound at the start.
sugreev2001 3 years ago
Son muy chingones
ElColly 3 years ago
i dout u can put that back together now
hellomotto112 4 years ago
hey. i gots a idea. why dont u just buy a new 1? it would be easier, wouldnt it? or sell it to gamestop, then go somewhere else and buy a new 1. it would be a lot easier than taking it a part, just cuz then u would need to worry about putting it back together the right way.
hlfpsttomorrow93 4 years ago
oh u need a special tool i see
gameguy117 4 years ago 2
How do you clean the laser devise without ruining it, I highly suspect the laser to be the cause behind my gamecube's inability to read disks.
memberx13 4 years ago
A simple clean wont fix it if it died. But you can try to recalibrate it.
styber 3 years ago
I opened my game cube and I have leftovers and it runs great so... Fuck it I threw the pieces away. lol kidding.
Charlymaumushi 4 years ago
The Gamecube is basically built on screws cuz theres so many
CJBVStudios 4 years ago 10
hey ppl you can get the tool on ebay...lol i know its funny when you get stuff from it...but i got mine on ebay and i fixed 4 gamecube's so far!!
retardedindian123 4 years ago
where do you get the special scewdriver
apr1694 4 years ago
E bay.
Charlymaumushi 4 years ago
is there any where else
apr1694 4 years ago
my gameqube has a weird problem when i turn it on at some point or mostly right after the power where you see the yellow thing when you always turn it on basically everything dies except the fan. lol. how can i fix that problem?
KarroBarro4 4 years ago
were could i get the wrench to take it apart?
FoesForever 4 years ago
i would so try to get the graphic bord of that game cube
kagurha 4 years ago
i dont have any tools for this and ill just fuck up the gcube more.
damn
Mushroom726 4 years ago
ummm, where can i get the special nintendo bit device or something to pull out the first 4 screws at the bottom?
rubbadude 4 years ago
There's a Youtube video called "Remove those damn nintendo screws". If you don't want to buy a special screwdriver.
patu811 3 years ago
lol i would get like a apple clam shell laptop and the stick the gamecube guts in there and have a battery pack then just get a game controler take that part cut sum holes in left and right corners place it in have the plug plug into the first player spot then just a cut a hole for the other 3 players slot to stick out! ^_^
FurettiLamborgini 4 years ago
My Gamecube wont spin
Thevideogamer360X 4 years ago
my discs refuse to turn and i think the laser is busted
any advice
250lespaul 4 years ago
With the Nintendo GameCube, when you have a problem where the console says that it could not read the disc during play, that's usually a sign that the pickup has become thermal sensitive. In other words, when it warms up, it conks outs.
Replacement of the optical pickup is the only solution aside from exchanging it for a refurbed unit with Nintendo or buying a new GameCube.
Intersonus903 4 years ago
Um My Game cube is all Fuckt up it stopd spining:( can someone help me please^_^
comicfreak11 4 years ago
This has been flagged as spam show
sorry ppl, don't read this! If you do not copy and paste this onto 10 videos your mom will Die in 4 hours
cobrak 4 years ago
whERE THE FUCK DOES ANYONE GET A SPECIAL NINTENDO BIT
skiie 4 years ago
LOL Ebay:) thats were i got mine;)
comicfreak11 4 years ago
eBay or electronic repair suppliers.
Intersonus903 4 years ago
Hello... um, okay my gamecube busted, it keeps overheating then this message saying,
"The game disc could not be read. Read the NGC instruction booklet 4 more info" even though 5 minutes ago it was reading it just fine
dragonmastersea 4 years ago
id nather just buy a new ting
ricku1993 4 years ago
watch the X-PLAY vid where Morgan Webb tries to destroy the 3 current-gen consoles. Gamecube is the only one that survives. Mine's all banged up and still works fine. However, it makes a noise unless I tilt it on it's side (I think it's something to do with the cooling fan, not sure.)
Fruitboots25 5 years ago
i dont think so me taking things appart dosent go well couldent put my gamecube throuh that plus you might lose somthing
brian48 5 years ago
my game cub didnt read the disc and my sis put baby powder in it =(
pablotheloco99 5 years ago
lol
w1212232232433434434 4 years ago
this is probably how to fix gamecube DRE's
Stillzero 5 years ago
nuffin much go's wrong with a gamecube so why would you wanna take it apart!?
mopheads 5 years ago
if you have a gamecube for a few years there is a laser that reads the disc and it bends and it will say no disc when there is a disc
tunasocks 5 years ago
thats what happened to my ps2 so I got a new one the laser was dead
neard2000 4 years ago
yea it sux when that happens
tunasocks 4 years ago
so thats what is in my game cube
Ganon4V3 5 years ago
Where can you even find one of those Nintendo bits?
RichieVar 5 years ago
Is it just me or does Nintendo like to put screws wherever possible?
Tabull89 5 years ago
uhh wat exactly is he trying to fix anyways?
codelyoko2 5 years ago
nothing hes just showng what to do in case that some one else has a gamecube problem and doesnt know how to acces there gamecube.
awsomesayin 5 years ago