Test run Tamiya Mini4WD Pro at Shanghai Science and Technology Museum

[TheSasukecurse]

trycycle vs tamiya 56 km/h!you got owned tricycle!

[kurbiezy1]

@LuvsMadel hey do you know how to build a mini 4wd motors? can u send me a link where i can learn how? i want to build one myself. thanks in advance.

[ho33es]

very smooth, but why limit yourself to the ms chassis if you're not going to use a standard tamiya motor? You could go much faster with a trike.

[vanquish008]

@babymaureen386 There are many ways to make your 4wd goes fast. Having a fast motor is one, but I believe having a great appreciation of the set up of the car is far more important. I have seen many people trying to get their cars to go fast by installing outrages motors, but only see their cars flying off the track. If you want a fast motor, get the Audley V1 motor for starter. The problem with custom motor is that there is no right or wrong, it depends on many factors... no one size fit all..

[TMPG2009]

Tamiya brands make motors with stable torque and stable top speed, if you want to go faster use AC and Kyosho brands and use pure silver for the winding, crazy top speed crazy torque but is pretty unstable

[vanquish008]

@TMPG2009 Agree. But I don't think the wire is made of silver, as silver is not a good conductor as copper. I think the wire insulated with a substance in silver colour.

[kurbiezy1]

@vanquish008 can u guys tell me where i can buy the fastest motor? willing to pay, i need to kick my couz butt.. lol need the websites and some tracks. thanks in advance

[TheSasukecurse]

@vanquish008 what kind of motor are you using I'm new at Tamiya!I have 1 tamiya with plasma dash already!

[MetallicBlack86]

I use a hyper dash 2 motor and a gp rechargable batteries...any advice on how i can make the car run faster?...cause i'm also concertrating on the stability as well..

[vanquish008]

@MetallicBlack86 What gear ratio are you using? What type of tyres and their sizes? What kind of rollers and where do you put them?

[MetallicBlack86]

@vanquish008 I'm running on a 4:1 i think gear ratio, i'm using rubber wide tyres but not sire wat's the measurement... i run on plastic rollers and their fixed on the sides of both front and back bumbers.....

[vanquish008]

@MetallicBlack86 Is it a Pro chassis? You can get some inspirations from the Tamiya monthly journal on Tamiya's japanese website. I am happy to ping you the link if you are interested. Did you notice the upgrade example on the box too? I would suggest you get some more parts, get a track (or go to a nearby track) and start experimenting. You might want to bring a stopwatch too :)

[MetallicBlack86]

lol.....batteries is also a major issue with speed...stong motor and low quality bats sure dun make upfor the speed...

[vanquish008]

@MetallicBlack86 Absolutely!! :D

[nobumatsu1853]

ああー、少し早送りした映像ですね。

[Nightrapture]

without change bridge is obvious make a so fast car

[vanquish008]

@Nightrapture You meant the standard Tamiya lane change bridge?

[Nightrapture]

@Nightrapture yep

[skr101274]

yes i am from USA . and thanks for the info. @vanquish008

[skr101274]

yes i am from USA . and thank for the info.

[skr101274]

I would like to get into this sport of racing these cars where can i purchase them and a starter track Please.

[vanquish008]

@skr101274 Are you based in US? You should be able to get some information on tamiyausa(dot)com.

[GojidSSJ2]

How long had you seasoned the motor?

[vanquish008]

About a few weeks I think. It's a matter of learning how others did it, applying it and experimenting with it. Give it a try, it's fun! :)

[vanquish008]

@GojidSSJ2 It was based on the Audley V1 motor parts, so it didn't really take long to get it up to this speed. However trying to make it go even faster was a much harder step to take. Any tips?

[alphamone]

O.O

wow. That is quite impressive.

[vanquish008]

It was based on the Audley V1 wires and magnet.

[vanquish008]

I think it is more than 0.45mm in diameter...

[firmansyah0496]

The fastest Car Bro....

[vanquish008]

@firmansyah0496 Thanks Bro. But I have seen faster still!

[ashcat9999]

what is this motor is it a rewind motor or not mind is a plasma with a strong magnet the silver magnet

[vanquish008]

It was a modified tamiya hyper dash pro motor with Audley V1 motor parts.

[ashcat9999]

because see that on the curves on the top have a loss in to is power and hear the sound

[vanquish008]

@ashcat9999 Well spotted. It was running with standard 9mm ball race rollers with 105mm total width front (Tamiya standard), so too much side movement and rolling resistance. Swapping the rollers to wider rollers with a 105+mm width will help (not Tamiya standard).

[PeirCElibaba]

erm is plasma dash faster or still your modified hyperdash?

[vanquish008]

the modified hyperdash is faster, but only if it is in good shape and paired with good batteries.

[ashcat9999]

this set up is good in tech straights but not in cornering and curves but it so good becuase its fast

[vanquish008]

Would you please explain why?

[mirzahaqim]

ultra dash yes..plasma nt yet..

[vanquish008]

Have you tried Plasma Dash or Ultra Dash?

[mirzahaqim]

my sprint dash is nt so fast lyke tt

[mirzahaqim]

why isit so fast?!

[vanquish008]

It is a modified hyper dash pro motor :)

[ho33es]

what motor is that? Seems too quick to be hyper dash pro, but i could be wrong.