M112 4.2L V6 drive-by

[nine3cobra]

that thing sounds weird but awesome

[edwardsm2009]

I want to do the exact same thing with my v6 f150

[MPRdrummer]

what kind of exhaust do you have on that it sounds sick?

[Indybird]

I'm absolutely lovin the sound man, that is almost exactly what I'm looking for down the road with my sixer.

[Matze080706]

sounds like a fucking chainsaw masacre

[ohsnapimadude]

that sounds so bad....

[03sixbanger]

thank you. ricers usually push 500ft lbs of tq

[greekooo3]

hey how much did that cost u ..cus im planning on stroking the 3.8 into a 4.2......just the 4.2..how much would that run me

[86734]

morana racing has a 4.2 stroker kit for $2,000. im also looking into stroking my 3.8 into a 4.2

[workensmart]

that sounds like an eaton supercharger is it? If it is than I didn't know they made an M112 I wonder if that would fit my SSEI?.

[lurch1489]

@workensmart kinda. the best thing for 3800s is to find an adapter plate for the M112 snout and rotors and put them in the M90. thats about it...

[MPRdrummer]

@03sixbanger lol ricers push 50 ft lb of torque haha my friends honda only has 102 hp

[joescivic]

@MPRdrummer it must be the fuel efficient honda then. there are some that make low power, and are only for gas mileage. but usually, they have close to the same torque as horsepower. there are boosted 700+hp 600+tq honda 4 cylinders as well. there are also 1000+hp civics. i forget the torque, but not all of them are that far behind. i like all cars, domestic/foreign, so dont get me wrong when i say this. i know for a fact my 200hp 142tq civic, full interior coupe, would rape that f150 with a 4.2

[MPRdrummer]

@joescivic im smoked my buddys supra mkiv twin turbo with my chipped 4.2l

infact 3 times i whooped him off the line

my buddys got a turbo ek4 with a k20 and of course i beat him as well

idk but my chipped 4.2l f150 seems to be doin work

[joescivic]

@MPRdrummer i dont know then. i havent lost to a truck yet with this k20a2 motor. not even lightnings, or some modded duramax's or powerstrokes. i actually have to wait for a clearing to cross over to the next lane to pass those trucks just mentioned. those races, i always start as the car behind them, just letting off the gas so i dont hit them. id like to see how yours actually pulls though if you beat a turbo k20 swapped hatch. unless you're saying you beat him off the line only.

[MPRdrummer]

@joescivic I whooped him through the 1/4mile

off the line and right down through

and the funny part is I kept the AC on the whole time which reduces the HP by 15hp and still beat him.

my buddys a full on tuner who only settles for the best and hes got a 240sx with a skyline gtr r34 engine swap in it, hes got twin hks turbos and its sitting on tien suspension

funny thing is he beat me off the line but my truck pulled through at the 1/8 mile mark and beat him on the 1/4 mile mark

[joescivic]

@MPRdrummer what are you, a 9-10 sec truck then? alot of all motor k20 hatches are running high 12's with just I/H/E and a tune and around 230hp all motor. one ran 12.8 in a full weight hatch, with I/H/E base tune with 214whp 151tq on street legal drag radials. turboed, i can imagine these things can be pretty quick if it catches traction. 1/4 might not get the best of it, but in a real long stretch, im sure it should pull far ahead. just curious. not hating.

[MPRdrummer]

@03sixbanger if even that

[Outlander11]

Put a mac exhaust system on it, or at least mac mufflers, sounds like a ricer as is.

[greekooo3]

honestly the v6 stang may sound a bit ricey but thats the unique sound its comes with itss not as high piched as ricers and its not roumbling like a v8...just in between. to me thats why i love the mustang 's 3.8 engine....a fully done 4.2 when crusing makes u think is that a v6 or an 8...at least my 3.8 ppl mistake it ...

[MPRdrummer]

@greekooo3 it gives it a sporty tone to tell the truth, personally I prefer v6's because everybody is getting v8s no just to put exhaust on them, they dont do anything else to enhance the performance.

I get ripped on for having a 1999 ford f150 ex cab with a 4.2l

but with flowmasters and a tuner im runing close to 280 hp

infact I whooped a GMC 6.0L with little 4.2l v6

people just get v8s to sound cool but they cant do anyhting , infact I bet they paid to have the exhaust installed

[csgtfaught]

@Outlander11 that just comes from the v6 no matter what you put on it it never quite sounds like a v8.

[Outlander11]

@csgtfaught

not true, mine sounds far better than most V8's I've heard.

[csgtfaught]

@Outlander11 did not mean to sound like it was bad, i just mean the v6 never sounds like a v8, as for yours, yes it sounds as good and in some cases better than some v8 stangs.

[greekooo3]

this what id wish my six to be a 4.2 with a whine..wat a speed ride dude ur sooo lucky to drive her...maby on my next v6 id do somthing like this

[03sixbanger]

thanks. its in hibernation right now....going to return about twice as bad i hope

[MPRdrummer]

@greekooo3 just by some bad bearings for your axles, thatll do the trick for the whine haha I saw a mexican in a astro van whos shocks were shot and his bearings were long gone, his whole van would move back and forth lol so I knew for a fact he couldnt of had a supercharger because his van was a piece of shit and it was slow as shit hahaha

[greekooo3]

@MPRdrummer ...i would when i get another v6...i have a gt for now

[KJBPj]

SOUNDS LIKE A JET AIRLINER!

[Bret03Cobra]

Automatic? Come onnnnnnn haha

PS you're welcome for that blower lol. Hows it working out on the V6 end? You have any dyno numbers? I've always been interested in a built V6.

[mysteed]

Derrick's making around 330rwhp and 417rwtq last time I checked.

[Bret03Cobra]

Nice nice mine's bringing me 545rwhp. Forgot the torque... I just bought the car and I have to pick up the paperwork tomorrow which includes a dyno slip, window sticker, receipts, etc.

[PURvennom]

love the whine ... just needs exhaust! lol

[leadfoot210]

sick whine i love that sound. how much rwhp?

[demonalistic]

What did this thing put down at the rear wheels? I have a '97 Cobra, but want to buy a V6 for a daily driver... don't know much about power on the M90 and M112 swaps. Nice ride by the way.

[03sixbanger]

ill try to get a better video soon...i just added a 3000 pi stall

[obdnanr]

sweet, make a longer vid!

[jnlstyle]

How may psi are you running? Whats you times?

[mysteed]

His best run was a 12.9 and he's still tweaking the car. If he'd just listen to me and buy a few things he'd be in the low 12's or high 11's.

[LshizzleJ]

nice, i like to hear it coming.

[mysteed]

SICK blower whine. :drool: