Brontosaurus Brushless Monster Truck HSP

[SweDrift1]

I have 1 myself

[06cristianoronaldo]

you dont know how to use it.

[charleygilbert1]

nice vid mate :)

[MasterBoy392]

hey bro, what battery are you using ?? lipo or NIMH ? please reply... and thanks in advance..

[foneperson]

huw much did u buy it for and where?

[normgood11]

I got one of these and now sperm always comes out of my dick

[nemimy520]

do u have stock tires???????

[Yowzer360]

I sell these things, the 7.4V LiPo makes them backflip if you are too throttle happy. The 11.1V makes it almost undrivable. Our demo model snapped the driveshaft, stripped the spur gear, bent the shock towers and absolutely destroyed the wheels.

It was a lot of fun, but didn't last long. These cars aren't strong enough to take the amount of power they put in them.

[1234thepatricks]

wank what shit wast of time you ow me 1min 4 sec of my life biatch

[hsvtrev]

@1234thepatricks Thats ok I will give that time to your mum, she is still tight from squeezing out a piece of shit like you so I might only last a min and 4 sec.

[robertksis]

@hsvtrev Hahahahahaha....you kill me man !!!

But seriously, what the f... should I do, to get this truck do a wheely?

What, only stronger battery?

I mean, I bought this thing for my 5 year old, based also on your video...

It's great fun, good quality, I also disconnected front drive...

But wheely?

[TATSHOOT]

oh and i run 35 pinon 88 spur. 48P

[TATSHOOT]

Dude i got one of these for a bit of fun, i run a EZrun 5.5T with yeah racing twin fan heatsync and a 11.1 30C 5200MAh and it dosent over heat, trick is to get those cooling fans and if you flip dont keep on the throtle.

Good vid anyways dude enjoy

[motabikeboy]

so this video is the truck completely stock but the battery?

oh and did the car last evry long?...reliablity

[weztech]

I have a hsp 1:8 brushless buggy, ditch the standard nimh and replace with 11.1V lipo and it is very fast, around 100km per hour, standard motor and esc takes the power perfectly fine, only issue I have had is driveshafts breaking because hsp cant weld properly, rewelded them myself and all good now

[Y0UCANTPARKHERE]

does any one know how many amps deans can handle

[SuperSnoozie]

that das not sound helthy

[FireStarRacing]

what is it like standard. any good?

[qrian1]

how many mah is the battery?

[Prussian84]

mah is unimportant, it influences only the time.

[TheyDontWantMusic]

of course its important, just as the C rating is on a lipo...

no point in having a 2000mah nimh that can only deliver half the current the motor needs.

[Prussian84]

thats not true. mah stands for how many elektrons can move in 1 hour. a higher value means longer time to drive. a 7,2V 2000 mah offers the same power as a 7,2V 4000 mah NiMh.

the C on a lipo is important for the maximum of ampere. the lipo CAN give more ampere but it CAN be damaged if you use more ampere than allowed. 20C in a 1000 mah lipo = 20 ampere maximum, 20C in a 5000 mah lipo = 100 ampere maximum.

[TheyDontWantMusic]

the mah rating doesn't influence only the time.

of course a 5000mah nimh will give more peak current that a 2000mah nimh.

realistically, they might both be rated a 10c?

meaning the 5000mah will give higher peak current.

a higher capacity nimh WILL give better performance than a lower one, probably slightly higher top speed, and slightly better acceleration, as well as longer run times!

but why would you wanna run crappy nimh anyway?!?!

[Prussian84]

@TheyDontWantMusic

additional:

the voltage influences the possible input

of a lipo. if you double the voltage

(imbalance between - and + ), the

amperage doubles (same resistance).

thats the reason why 11,1 V lipos

are "faster" than 7,4 V lipos.

[TheyDontWantMusic]

yes, but if you have a lower capacity battery, the voltage will drop more with load than a higher capacity battery.

I'm not talking about different voltage batteries here.

[samfox11]

@Prussian84 welll derrrr 11.1 volt is more then 7.4 volts there for more voltige more power dick head

[Prussian84]

@samfox11 dont waste my time with your basic knowledge, kiddy.

[gyrtaz]

@Prussian84 2x voltage = power 4x. problem is overheating... but result are outstanding :D

[30GB]

you need to go 11.1v and bigger pinion gear on the motor

[hsvtrev]

the ESC overheats if you do that, bigger pinion helps alot but it doesn't need more than 7.4v

[vtowndegekste]

do you drive with a LiPo or a NiMh batt

ery?

[scorpien32]

is the car like out of the box or did u anything tune like better electro motor or so ..? pls reply :P

[nmewe1]

can u put a 11.1v battery in it

[nmewe1]

hell yer

[kiriakoskakos]

how fast does it go

[alan8112]

trev is the gear will Strip eazyly if play like this

[123kw22]

what voltage battery were you using in that run??????

[hsvtrev]

7.4V

[savageandrevo]

har denne bilen lipo cutoff

[BennyCrap]

Damn! Pretty cool! You should try making some backflips on a jump

[yenkopower]

ur gonna strip ur gears in no time

but pretty good for electric

[mac16a]

great car !

[fpaelectronics]

you should not keep vigorously accelerating like that or you will strip the gears

[hsvtrev]

I broke the centre driveshaft, the gears are fine and at $2 each who cares lol

[Larsod1]

Whats the speed?

[Warthogfan]

Anyone know where I can get a metal spur gear? The plastic one is knackered fter just a few days. Thanks

[albertoz1962]

fuck that brushless version is awesome

[toolooseanddoffie]

hi do u know how much i would pay for one of these batteries at my local hobby shop..what did u pay?thanks

[mirovampiro]

Hello

the battery i have 7.4V 8000Mah 20 - 25C cost 64 US Dollars with free delievery all over the world, and i have another 7.4V 8000Mah 15C with a price of 36$ with delivery,very good price i think :)

hsvtrev,don't you think that the spur should be 68 or litle more, not 64P ?

I try to find spur more than 64P, but didn't find!

Because i think that with 68T or more the model will run even better, and even if the speed drops, it will not be so much

[mirovampiro]

Hello,thanks for the information

How many time you run with yout battery?

My time is from 40 to 60 minutes with the 7.4V 8000mah 20C battery ?

[mirovampiro]

Hello, i have the same model, only the name is HSP who make them really!

Can you tell me with what battery you are,and also what pinion and spur ?

I am with 64 spur and 14T pinion, and with

7.4V 8000Mah 20C battery , and the model run like yours :)

[hsvtrev]

Hi,

yes mine is the same ratio, the battery is a 7.4V 2200mAh 25C.

[toolooseanddoffie]

thanks for the help

[toolooseanddoffie]

ok thanks do u know when u will get some in?

[hsvtrev]

It takes about 3 days to arrive from when I order it. If you would like to order one then please contact me via my website.

[toolooseanddoffie]

hey how much do u sell the brontosaurus pro for?

[hsvtrev]

With the Current AU$ it would be about $390.

[julizq]

Que motor tiene, ESC y que baterias utilizas? Tengo uno parecido al tuyo (AMAX TORCHE-PRO)y me gustaria saber que es lo que tiene este para saber si tiene lo mismo el mio.

Un saludo

Gracias

[lummox1212]

El motor es 3300kb escobillas con un 70amp CES. Yo diría que la batería es un 8000mah 11.1v LIPO valor de $ 200!?