Most likely going to get this AEP. Quite a nice sidearm. Where did you get the hi capacity magazine from? I can't seem to find one that is not discontinued.
hey i just have one question... could you make a vid on where you got your new spring for this and how to install it? it would be greatly apprietiated~ hockey
The extended mag for the Tokyo marui g18c aep will fit in both the Marui, and Cyma g18c aep. Those are the only 2 brands that make them (as far as I know)
oh well the only thing i can think of is if you call airsoftgi they might be able to contact Cyma and get a new motor but idk 909-869-0671 is airsoftgi's number
I have guns that shoot aorund 200fps with a .2g and all .12gs do to them is jam them. They are low quality and if you are stupid enough to use thm in an upgraded gun like this then you must be preety damn stupid, and most likely give up airsoft....
how is hell is the cyma glock 18c a upgraded gun.. and it depends on the brand of .12 so maybe you should shut up.. your not an expert at airsoft and until you are you dont have proof
.12 are made with terrible quality because no airsoft BB retailer in their right mind would waste money on .12BBs. They have a huge air pocket in the middle and have terrible consistency/shape which makes them inaccurate and jams guns easily. Low weight BBs also are useless due to a law of momentum and energy loss that you prob. wouldn't understand.
I bought it off a guy who got it from the HK.. They can be found at WGC, ebay, and other Major HK shops.. This CANNOT be found in US shops other than here in Hawaii..
If you want the exact one above let me know,I am trying to sell all of my Upgrade parts..
Srsly, $130 shipped for a Whole Lot of upgrade parts..
go to point act, only $8.50 same price as the regular so you might as well just get the 10 round (and btw the regular mags for this gun are kinda annoying, like if the bb touches the inside of the gun it will burst and bb's will scatter around you and its kinda lame
i am thinking about purchasing this..... can i attach a pistol suppressor on this.....wats the fps with that new spring on it?? and culd u post a vid showing us how to install a new spring?
I got the new verion when they didnt even hit the States yet for $60 shipped. Now you can get them for about $40 if you look but I have heard they are not as good.
Ay, can u help me out.Uhm. I have been having problems witht the standard mags and it seems that the screws get lose. After lightly tightening it, the mags do not feed at all. I have to play with it. It works off and on. Another issue is that full auto does not work. is it because of the feeding or another problem? thanks
Haha, Well, just about every upgrade part and every Teflon mod possible.. I have most of the parts so far to bring it to 265 FPS that costed me $100+ from the HK.. Most of the parts are hard to find too..
oh yeah, i forgot that this uses a small gearbox, for some reason i thought it would look like one of those cheapo ebb's with the slide removed, thanks
Did you buy the spring from overseas? I can't find it anywhere here. If so, how long did it take and how much was it for all the upgrades you did to this gun?
and how many meters far can go more or less? because im from spain and i dont know how meters are 1 fps, do you think that's suficient for have fun playing with my friends??
yea but its low in power gas could cost only 4 bucks and it non blowback and just not really realistic. i got my gbb pistol for $60 and that aep cost around 55? so yea no piont of getting a aep..(:
Uh, well it will last for atleast 1,000rd. I am not sure. I am trying to find a way to use an external battery like the TM Pro-light. Please be sure to check out my other videos in my old profile. =]
Ah thanks. I think you will be happy if you get one. If you can though, get the TM version. The TM Ver. hold 101rds were the cheaper CYMA Ver. only holds 88rds.
Ok, well I didnt have enough time for another shooting test video because it was about 6:46 PM. Another video will be addded with more fireing vids. I hope to shred a can very soon...
did you put the spring in yourself or did you have an airsoft dealer upgrade it for you?
JerFish12 2 months ago
after i shot it ONCE on fully auto, it jammed and. It still doesn't work (and yes i removed the jammed ball from the barrel)...
hellgast69 1 year ago
It doesent have blowback!!!
freak81990 1 year ago
dose the slide still move if there are no BBs in it? i nead this for a movie
MrCheespuff 1 year ago
ill trade anyone my 66 powermaster (rifle with metal barrel) for their glock if you want to trade the message me on my channel
barneysgonnafindyou 1 year ago
gay 18 noob ;)
heerbee91 1 year ago
the hicap makes me horney :3333
thedarkinhell 1 year ago
that full auto was embarrassing gas ones are way better
heyycrabtree 1 year ago
i have the high cap magazine but in works like a shit
rixicon 1 year ago
how much fps this gun shoots with that new spring?
SgtMcCullin 1 year ago
were can i get spring and TM Pro-light
thenameisjulio 2 years ago
now thats how the g 18 should look like
4thwingchun 2 years ago
Most likely going to get this AEP. Quite a nice sidearm. Where did you get the hi capacity magazine from? I can't seem to find one that is not discontinued.
Jackdarabbit12 2 years ago
This gun is cool and awsome gas blow backs are not that good because my one broke because of gas I payed so much off
casey101100 2 years ago
how much did you pay for it?!?!
400adidas 2 years ago
hey i just have one question... could you make a vid on where you got your new spring for this and how to install it? it would be greatly apprietiated~ hockey
hockeyinca 2 years ago
I'm getting this gun
ndrdylan 2 years ago
I'm getting this gun
ndrdylan 2 years ago
hi i will buy this gun... is there a railseemed?
McUlim456 2 years ago
hw many fps does it do with the new spring, is it easy 2 fit and how much does it cost?
LeeIsBoobs 2 years ago
do u know where to get new gears for this gun because mine stripped
Papakolea464 2 years ago
do u need to wind the mag or do u need a speed loader
Papakolea464 2 years ago
You just need a speed loader, like a midcap.
AirsoftHawaii09 2 years ago
@Papakolea464 ther comes a speed loader with the gun and yes you need a speed loader or you can load it by hand
coolgey1000 1 year ago
Do you have to do any other upgrades to put in the nine ball spring
Wh137D3v1l 2 years ago
I <3 your mag.
Raurik 2 years ago
The extended mag for the Tokyo marui g18c aep will fit in both the Marui, and Cyma g18c aep. Those are the only 2 brands that make them (as far as I know)
rocknrollcows 2 years ago
do u think it is ok without the high cap...i plan on getting this one
jaystew2 2 years ago
pwned! WHERE DID HE/U GET THE HI-CAP?
thatlooksprettyfine1 2 years ago
is i metal?
bamibalboy 2 years ago
dude i have this gun but the thing i dont like about the mag on both hi tops i have sometimes the bbs will fly out its so annoying
sharkboy95 2 years ago
hey astrotard jones its a high cap not a high top you noob dumb ass
puckcreep 2 years ago 4
I love this gun. I play with people with SAWs and junk and I can murder them with this gun!!!
EYEAmMrBrightside 2 years ago
no their compleatly different
83scarface 2 years ago
box owner
airs0ftMARIZON 2 years ago
what is the best thing to do to get this to shoot harder?
im guessing a stronger spring but im not sure what spring to get.
Help anyone?
jackapotomus26 3 years ago
the bb's .20's r good makes it shoot harder and farther
ViETxSOULJAx 2 years ago
doesn't make it shoot harder, the overall power is the same between BBs but it does make it shoot farther
xkakashix12 2 years ago
Comment removed
ThankYouSniper 2 years ago
eh? nineball makes upgrades that allow the g18 and other aeps to reach 250fps mainly by the spring and battery but the rest are just better parts.
ThankYouSniper 2 years ago
Where would you get this nineball spring and would i be able to install it myself??? someone give me some info please.
justnguyen228 3 years ago
will i screw my gun if i had a 12 volt battery in?
jer3myz 3 years ago
your gun would be completely fucked no chances
OSU5312 3 years ago
aight...i'm a newbie..=]...Any Good WEbistes to get the motor??
jer3myz 3 years ago
the motor for this gun?????i dont think there are any you might just have buy another
OSU5312 3 years ago
the place where i live in in illegal to get airsoft guns...so its kinda hard
jer3myz 3 years ago
oh well the only thing i can think of is if you call airsoftgi they might be able to contact Cyma and get a new motor but idk 909-869-0671 is airsoftgi's number
OSU5312 3 years ago
wow...gonna be super expensive..lol...i live in m'sia...suckish country
jer3myz 3 years ago
use .12 on this gun dude.. .20 are for aegs..
l33tcompany 3 years ago
no just stop posting
pyxiefrog124 3 years ago 2
what..
l33tcompany 3 years ago
no no jus just stop just stop
pyxiefrog124 3 years ago
With .12s the accuracy will make the gun almost usless. .12g bbs are for WALMART guns.
AirsoftWhity65 3 years ago 2
dude no they arent..
l33tcompany 3 years ago
I have guns that shoot aorund 200fps with a .2g and all .12gs do to them is jam them. They are low quality and if you are stupid enough to use thm in an upgraded gun like this then you must be preety damn stupid, and most likely give up airsoft....
AirsoftWhity65 3 years ago 2
how is hell is the cyma glock 18c a upgraded gun.. and it depends on the brand of .12 so maybe you should shut up.. your not an expert at airsoft and until you are you dont have proof
l33tcompany 3 years ago
.12 are made with terrible quality because no airsoft BB retailer in their right mind would waste money on .12BBs. They have a huge air pocket in the middle and have terrible consistency/shape which makes them inaccurate and jams guns easily. Low weight BBs also are useless due to a law of momentum and energy loss that you prob. wouldn't understand.
HungAzn 3 years ago 2
your point?
l33tcompany 3 years ago
...That .12s suck?
boredom1000 2 years ago
yeah, where'd you get the spring?
cPDES 3 years ago
Jesus christ guys, Use GOOGLE..
I bought it off a guy who got it from the HK.. They can be found at WGC, ebay, and other Major HK shops.. This CANNOT be found in US shops other than here in Hawaii..
If you want the exact one above let me know,I am trying to sell all of my Upgrade parts..
Srsly, $130 shipped for a Whole Lot of upgrade parts..
AirsoftHawaii09 3 years ago 2
where can u get a spring upgrade?
wwscsoccer5 3 years ago
can any one tell me where to find a hundred round clip for this gun
hatdomfratdom 3 years ago
go to point act, only $8.50 same price as the regular so you might as well just get the 10 round (and btw the regular mags for this gun are kinda annoying, like if the bb touches the inside of the gun it will burst and bb's will scatter around you and its kinda lame
l33tcompany 3 years ago
To anyone who wants to buy the Spring, Or any other AEP Upgrade part, Message me.. I am trying to sell my AEP stuff..
AirsoftHawaii09 3 years ago
ill buy your stuff for this gun i am looking for this gun how much for thr gun spring and clip.
zagsniper 3 years ago
yow im looking for a 100rd highcap but i cant find 1 in holland maybe u know where i can let is send to my house?
LittleEmi3m 3 years ago
Sorry, Try WGC. com
AirsoftHawaii09 3 years ago
i am thinking about purchasing this..... can i attach a pistol suppressor on this.....wats the fps with that new spring on it?? and culd u post a vid showing us how to install a new spring?
billythefreewilly81 3 years ago
what is the fps if you put a nine ball spring in the gun
zD2x 3 years ago
how long does the battery last?
ProtoPaintBallz 3 years ago
how much did the mag cost? i might get one
tommie314101 3 years ago
im getting one of those but it only has a 22 round mag. can anybody tell me if one of those extended 90 round mags would fit in it?
11Tuber11 3 years ago
yes and its a 100 round mag
paradise278 3 years ago
So much FPS is it now??
rainbowsixairsoft 3 years ago
fps? how much was the spring?
JMSrox19 3 years ago
yeh im gettin that wit a spare regular cip and a 100 round clip its awsome!!!!!!!!!!
CaveMan1308 3 years ago
i really need to know how to attatch the nine ball spring please tell me/ show me how. video perhaps!!! wirte back
harrydabest 3 years ago
where'd you get the sring???
cPDES 3 years ago
Im thinking of buying tht gun...Where did u get the 100 round mag pleaseeeeeeeeeee write back
kookler22 3 years ago
i think i saw one at kapowwe
SoManyNamesUsed 3 years ago
i am from hawaii too... i wanted that same gun howd you get it cause shipping sucks ass
cynsux1 3 years ago
does the cm 030 come with the nineball spring already? or you can buy it somewhere for upgrade?
is there any upgrade for this gun?
carlmpr4 3 years ago
Its a sepate upgrade that you can install If you find one..
AirsoftHawaii09 3 years ago
also is the gun going to break after a while?
masicurr 3 years ago
It all depends on how you handle it
Terinigan 3 years ago
well, useing it 2 times a week in a fast pace war?
will it last there?
masicurr 3 years ago
how many bb's can you shoot before the battery dies?
masicurr 3 years ago
wheree did you get teh spring?
Dafrog235 3 years ago
where can u buy the bigger mag?
themafiya 3 years ago
thats a fake tokyo marui
themafiya 3 years ago
Yeah, thats because its NOT..
Its CYMA, but upgraded and a TM mag..
AirsoftHawaii09 3 years ago
DAyuum son thats a crazy glock
wtfasiankid8o8 3 years ago
how much was the gun itself?
kalebbosl 3 years ago
I got the new verion when they didnt even hit the States yet for $60 shipped. Now you can get them for about $40 if you look but I have heard they are not as good.
AirsoftHawaii09 3 years ago
Ay, can u help me out.Uhm. I have been having problems witht the standard mags and it seems that the screws get lose. After lightly tightening it, the mags do not feed at all. I have to play with it. It works off and on. Another issue is that full auto does not work. is it because of the feeding or another problem? thanks
gundom93 3 years ago
Well, I have never heard about that kind of problems with Standards.. Does it still hold the bbs in place, or do they all come out?
AirsoftHawaii09 3 years ago
Most of the time it keeps the bbs in there after i have tightened it. But it does not feed.
gundom93 3 years ago
Holy BALLS. This is awesome.
Agendaman2 3 years ago
Can you upgrade this with an M100 or an M120 spring?
DaJuggernauL 3 years ago
no.
Is not possible, I already told you on ASR..
AirsoftHawaii09 3 years ago
oh shit really?! haha sry i didnt check it at the time. btw way what do you gotta do in order to boost it to 260?
DaJuggernauL 3 years ago
like what kind of parts are needed.
DaJuggernauL 3 years ago
Haha, well thats also impossible unless your willing to do all of the tweaks and buy all of the parts needed to get even close to that high..
AirsoftHawaii09 3 years ago
yeah i'm actually willing to do it.
so do you know what parts i'm gonna need to do it?
DaJuggernauL 3 years ago
Haha, Well, just about every upgrade part and every Teflon mod possible.. I have most of the parts so far to bring it to 265 FPS that costed me $100+ from the HK.. Most of the parts are hard to find too..
AirsoftHawaii09 3 years ago
Cool vid man, im thinking about getting this gun for my bro as his first airsoft gun.
Any idea what the fps is with the nineball spring in there?
also..
Is it easy to install a new spring?
( Like is the spring visible when you remove the slide )
Thanks
SomebodyOO7 3 years ago
There are 2 spring I think your mixing up, The one closest to were you remove the slide doesnt give the gun its power, Its just a Nozzle spring.
The ninball spring goes into the comple gearbox inside of the hand grip.
Yes, I would recommend it, And I am guessing FPS would be around 220-230 if done right. With other upgrades for compression, it could be at 260FPS.
AirsoftHawaii09 3 years ago
oh yeah, i forgot that this uses a small gearbox, for some reason i thought it would look like one of those cheapo ebb's with the slide removed, thanks
SomebodyOO7 3 years ago
hey airsoft hawaii wut website did u get the tokyo marui 100 rd clip
i can only find the cyma 88 rd orund one i want the tokyo marui
21to19 3 years ago
Um, I got it from a friend used, so I am not sure.. I know Kappowe has some?..
AirsoftHawaii09 3 years ago
Did you buy the spring from overseas? I can't find it anywhere here. If so, how long did it take and how much was it for all the upgrades you did to this gun?
EliteSniper554 3 years ago
hey sup is this gun mostly metal or plastic?
please reply thanks
Kenster168 3 years ago
Externals Plastic, Internals all metal..
AirsoftHawaii09 3 years ago
how fast does it shoot with the nineball spring?
oquin18 3 years ago
Thats w/ the Nineball ^
AirsoftHawaii09 3 years ago
where is the cheapest place to buy this gun
dcos510 3 years ago
im not gonna tell u because u'll probably take the last one....lol
mtvCopyright 3 years ago 2
cooooooooooooooooooooooolllllllllllllllllll man
blastojake 3 years ago
where did you get that gun its awesome oh and great videos
airsoftmaniac402 3 years ago
Where'd you get the nineball spring at? I'm just wandering because I want to upgrade my CYMA G18c.
RealDyl214 3 years ago
how long does the battery charge for and how long does it last?
sesti21 4 years ago
2 hours to charge
wussupmonkey 3 years ago
hey niice review i was wondering where can you find a upgrade kit for this glock
please reply
Kenster168 4 years ago
its a good gun tell me the truth because i want to buy it
GerardRC11 4 years ago
Its no Primary but its a good side arm. Dont exspect High FPS.
AirsoftHawaii09 4 years ago
and how many meters far can go more or less? because im from spain and i dont know how meters are 1 fps, do you think that's suficient for have fun playing with my friends??
GerardRC11 4 years ago
i think its around 75 meters per seconds...
you can correct me if im wrong...
250 fps in to meters is around 76 mps...
masicurr 3 years ago
320 with 9ball and 80-120 depending on battery life!
4527richie 3 years ago
cool, im getting it for a sidearm because i HATE gas pistols.
waddleg 3 years ago
i cant find those TM highcaps anywhere, does anyone know where to find them?
Longshot182 4 years ago
Uh, I have seen them on Kapowwe?
AirsoftHawaii09 4 years ago
EbaY
sumoman25 4 years ago
they still suck ok? geez give it a rest
mikefil992 4 years ago
yea but its low in power gas could cost only 4 bucks and it non blowback and just not really realistic. i got my gbb pistol for $60 and that aep cost around 55? so yea no piont of getting a aep..(:
mikefil992 4 years ago
You can get one of these for $30 shipped now and you dont need to buy gas? Plus, There upgradeable.
AirsoftHawaii09 4 years ago
whats the point of getting an aep
mikefil992 4 years ago
Don't need to spend money for gas, Cheaper gun, I like it better.
david0789456 4 years ago
where did you get that "nineball spring" cant find one anywhere cus i would like to make it atleast more stornger.
DaJuggernauL 4 years ago
Do the bbs in the high cap rattle?
Godawfull 4 years ago
where did you get the hi cap
noob4ever62 4 years ago
I got it from a Good friend that I have ordered from before.
AirsoftHawaii09 4 years ago
is that blow back? and i never figured out what the numbers on the back of the mag mean. do u know?
Pych0ticPr0ductions 4 years ago
Its non blowback, theres not enough room for a blowback system due to the gearbox.
The numbers are fake, I think on the real thing, they would have holes showing how many rounds you have left.
AirsoftHawaii09 4 years ago
how long does it take to charge the battery?
iamspecial101 4 years ago
About 4 hours max.
AirsoftHawaii09 4 years ago
ok tanks i was thinkin about gettin this gun
iamspecial101 4 years ago
Where did you get the spring?
How much?
spymaster777 4 years ago
HOOOOOT GUN! Im gettin that.
maxie355a 4 years ago
wut is ur old account
mdew92 4 years ago
On the right there are some other videos like "CM.030 disassembly guide (2 of 2)", those are my videos
AirsoftHawaii09 4 years ago
The videos have been very helpful! How has the battery life changed since the Nineball spring upgrade?
phucq 4 years ago
Uh, well it will last for atleast 1,000rd. I am not sure. I am trying to find a way to use an external battery like the TM Pro-light. Please be sure to check out my other videos in my old profile. =]
AirsoftHawaii09 4 years ago
how much lol
Lordnihilus357 4 years ago
stock it only bust's out 200-220 fps. how many fps. with the nineball spring?
deluxeskater 4 years ago
I would say around 235 max FPS. I know its not much but It would be better with a new piston head for a better seal.
AirsoftHawaii09 4 years ago
damn you destroyed it!!! Might get a hi-cap for mine too!
theboynotfromcanada 4 years ago
Ah thanks. I think you will be happy if you get one. If you can though, get the TM version. The TM Ver. hold 101rds were the cheaper CYMA Ver. only holds 88rds.
AirsoftHawaii09 4 years ago
Ah.. Didn't know that...sweet thx!
theboynotfromcanada 4 years ago
HOW MUCH IS THE TM 100 ROUND MAGAZINE?
gunsareforever 4 years ago
I got it used from a good friend, Sorry.
AirsoftHawaii09 4 years ago
nice
Arandomguy77 4 years ago
Thanks! I think it was really worth it...
AirsoftHawaii09 4 years ago
Ok, well I didnt have enough time for another shooting test video because it was about 6:46 PM. Another video will be addded with more fireing vids. I hope to shred a can very soon...
AirsoftHawaii09 4 years ago