My father tried a Snap On impact once,nothing but a pile of junk.Was sent in for repairs most of the time.Told the dealer he had give him his IR231 back.So,quit being an a-hole and you are making a very much jaskass of yourself.No more,you go it ?
@wafrederick once again your father why not try one for yourself you fucking jackass here say means nothing its not even admisbile in the court ot law for obvious reasons. Not only that you just proved my point your talking out your ass you are baseing your opinion on what your daddy said after he sucked off the matco dealer now robby really get over yourself.
someday when you grow up and actually have some tools get back to me.
My father is not full of shit,you are!Snap On dealer he had told him anything worn out is not covered under warranty.I even seen one Snap On impact with a bad hammer mechanism,anvil would not turn and it was a trade in my Matco dealer took.My father is a smart 56 year old that served this country,4 years in the Marine Corps.IR still makes Matco's impacts since IR has a good name.IR also makes Cornwell's and Mac's air tools.
@wafrederick Robby why make so many troll accounts really its not funny and just makes you look like more of a jackass. Oh so the matco guy took in a broke impact that did not work and your comparing that to matcos? really pathetic if you ask me.
I dont care if your daddy had sex with osama it doesnt make him smart he is a dipshit if he does not know the difference between a working impact and a defective one.
I am not lying and this is true.My father has ran his own shop since 1981 and started working at a Chrysler dealership.My father knows his stuff and i get this from him.i did go to school for this.I am no kid,I am a 31 year with 9 years experiance.
@wafrederick Well maybe daddy is full of shit why not get your own information and make your own judgement. Not surpriseing tho since your father is obviousley the same way since he just believes any bullshit matco feeds him. Tool dealers and I mean all of them try and bullshit people to make a sale. That is one thing all my tool dealers know better than to do with me. I want proof and matcos bullshit about thin hammers is just that bullshit.
The new Mg325,you will have sent in repairs due to the Hammer mechanisms breaking which is a huge problem.No one will get me to use Snap On Impacts,Have been using IRs all my life and always will.My Matco dealer still takes Snap On impacts on trade and sells them dirt cheap.One needed to be sent in,anvil seized right up.
@wafrederick Once again your a stupid lying dipshit. First off you fucking idiot it has the very same hammer mechanism as the mg31 its the same gun except they upgraded the motor to 8 vain and tappered the front of the houseing to get in tighter places. I had my mg31 for 8 years and it still worked perfect I sent it in because the front seal started leaking.
Now go suck matcos dick some more you fucking idiot!
@wafrederick Also you stated your daddy has a shop so that means your just a little boy and have not used shit. I have been wrenching for over 20 years for a living jackass so give up your bullshit.
You better watch it or I wil report you!The MG31 that was taken on trade had no power and another person on my Matco dealer's route did this.Plus some Snap On dealers can be really pricks,treat their customers like shit.
@wafrederick Report me all you wish your full of shit I have put my mg31 up against matcos shit impacts and it smoked them I also have put my mg725 up against them same results. I now have the mg325 so go blow smoke up someone elses ass.
My father is no moron,you are disrespecting a US Marine veteran.My father is no backyard mechanic and has done this for a long time knowing he has done this for a long time.One more thing,I did see my Matco dealer did take a MG31 on trade on Friday for a Matco impact.Put my IR2115TI vs the MG31,My IR2115TI will win.
@wafrederick you mean your daddy sucks the matco dealers dick and therefore you like them also. I know for a fact your full of shit since I have put the mg31 and now my mg325 up against matcos impacts and they won hands down. Now go run along little robby and get your ass on that short bus.
I am not full of it.My father does not need vendors coming in late,this is the way he takes care of it.Called Snap On on this dealer and would not do a thing,their service sucks.The transmission jack never gets used anymore,have two autoparts store cheapies that have put this Snap On to shame.This dealer my father kicked out even got drunk one night and smashed the shit out a Matco toolbox in great shape on trade with a few customers.My Matco dealer received this info from a customer of his
@wafrederick your father is a moron he is a back yard mechanic nothing but a moron nothing more needs to be said you proved my point. Thanks for playing!!!!!!
This dealer still comes around and my father kicked this dealer out for bad service,came by after working hours.My father owns his own shop and most of his snap on stuff is junk.Has a transmission jack this way made by Lincoln which are POS jacks known for leaking,this one leaks.My father is telling the truth and hates vendors coming in late.Snap On takes too long on things.Have a torque wrench in for calibration sent in by another dealer down the road.
@wafrederick robby no need to talk out your ass any more just admit your a fuckiing idiot! Tell your daddy real techs can take care of those things we deal with it all the time and most important your full of shit now get over it!
My father has,dealer he kicked out would not warranty anything worn out.This dealer still does this,Guys on his route have drawers full of worn out tools this dealer will not warranty.This dealer told my father anything worn out is not covered under warranty.Some dealers can be real pricks.A dealer would not go into two area in the Ludington and Manistee,Mi area.Even in the White Cloud,Mi area,Snap On dealer down the road in my area decided to take it.
@wafrederick My guess is nobody buys anything from him ever so he says the hell with that shop. My mg31 front seal started leaking after 8 years I sent it in twice for repair cost me $118 and it still leaked so my dealer called the district manager and they gave me a brand new in the box mg325. So I paid $118 for a brand new $400 impact so I guess snap on does stand behind their products. Your father is not telling you the whole story.
@wafrederick One more thing just to be fair I have never had any problem getting anything warrantied from any dealer this includes matco, snap on, mac and cornwell. The problem with matco, mac and cornwell is they are hit and miss I have went years with out those dealers yet I have never worked at any shop that did not have a snap on dealer.
@wafrederick Never in my life over 20 years in the biz have I every had a problem getting anything snap on warrantied........Try again. Snap ons 1/2' impact is lithuim ion same as matcos.
I have put my mg31 and mg 725 up against matcos and it smoked them you cant bullshit me I do it for a living remember.
I am talking about the air tools,not cordless tools.I seen another Snap On impact on trade todaywhichn my matco dealer took on trade.Matco has the bettert batteries over the Snap On for the cordless,do not use Ni Cad batteries anymore.
It is true,Snap On's newer impacts have very thin mechanisms.My Matco dealer took on one trade seized up.With a Snap On you swear by them or swear at them.It is a common problem.IR is a well known name and Nascar pit crews use IR impacts due to reliability
@wafrederick robby give it up already its getting old! I do it for a living and your bullshit wont work I know from experience. IR makes good air tools back in the day nobody could touch them however snap on has taken over and they are on top.
IR still makes Matcos impact wrenches to Matco's strict specs.My father tried a Snap On impact wrench once,nothing but a huge POS.Sent in for repairs most of the time.Told the dealer he had to give his IR231 back.I will only use IR impacts,been reliable,can't kill them and easy to rebuild.
7 vain motor really how the fuck do you balance an odd numbered vain motor? I will put my mg31 against that over priced matco shit any day of the week not to mention 7 vain LMFAO.
Matco must be desperate to put a stupid bimbo in their videos why not let us techs say what we think?
@HunterCO1 your mg31 will lose.Matco's impacts are made by IR which are the best impacts out there.Snap On can't keep up with IR for power,SO's impacts known for breaking hammer mechanisms because they are way too thin.I have seen snap on impacts that my Matco dealer took on trade
@wafrederick Hate to break it to you but I did put it up head to head and it won. I then listened to the matco guy tell me there 3/8" cordless has more power than snap-ons so once again I told him if it beat the 4410 I would buy it. Matco advertises theirs has more ft ilbs of torque and guess what on the matco truck the ct4410 smoked matcos. Also your full of shit IR does not make matco's air tools anymore.
@wafrederick One more thing your bullshit posts all over youtube about snap-on haveing thin hammers is bullshit also had my mg31 for over 8 years use it everyday all day long and the front seal finally started leaking they could not repair it so they gave me a mg325 for the price of what they charged to repair my mg31 $118. You must be robby's twin brother.
Who cares what she said even if it is outta sync. I mean she is a really sharp looking gal.. I enjoyed watching her lips move in any speed.
FredFlintStoneRox 6 months ago
The audio is all out of sync like watching an old cung foo movie LOL
fatboyfester 8 months ago
ONLY FFAGGOTS USE THAT GAYY ASS GUN! it is weak
OGstrope 1 year ago
@OGstrope
They use it on their nuts.
scalabration 5 months ago
and yes I bought this gun I have both 3/8 and 1/2 matco and they are the shit!!!!!
samuelxrc 1 year ago
hahahaha you guys suck ass!!!!!!! They are just fucking tools!!!! oh and @wafrederick buy your own tools and stop borrowing daddys
samuelxrc 1 year ago
My father tried a Snap On impact once,nothing but a pile of junk.Was sent in for repairs most of the time.Told the dealer he had give him his IR231 back.So,quit being an a-hole and you are making a very much jaskass of yourself.No more,you go it ?
wafrederick 1 year ago
@wafrederick once again your father why not try one for yourself you fucking jackass here say means nothing its not even admisbile in the court ot law for obvious reasons. Not only that you just proved my point your talking out your ass you are baseing your opinion on what your daddy said after he sucked off the matco dealer now robby really get over yourself.
someday when you grow up and actually have some tools get back to me.
HunterCO1 1 year ago
My father is not full of shit,you are!Snap On dealer he had told him anything worn out is not covered under warranty.I even seen one Snap On impact with a bad hammer mechanism,anvil would not turn and it was a trade in my Matco dealer took.My father is a smart 56 year old that served this country,4 years in the Marine Corps.IR still makes Matco's impacts since IR has a good name.IR also makes Cornwell's and Mac's air tools.
wafrederick 1 year ago
@wafrederick Robby why make so many troll accounts really its not funny and just makes you look like more of a jackass. Oh so the matco guy took in a broke impact that did not work and your comparing that to matcos? really pathetic if you ask me.
I dont care if your daddy had sex with osama it doesnt make him smart he is a dipshit if he does not know the difference between a working impact and a defective one.
HunterCO1 1 year ago
I am not lying and this is true.My father has ran his own shop since 1981 and started working at a Chrysler dealership.My father knows his stuff and i get this from him.i did go to school for this.I am no kid,I am a 31 year with 9 years experiance.
wafrederick 1 year ago
@wafrederick Well maybe daddy is full of shit why not get your own information and make your own judgement. Not surpriseing tho since your father is obviousley the same way since he just believes any bullshit matco feeds him. Tool dealers and I mean all of them try and bullshit people to make a sale. That is one thing all my tool dealers know better than to do with me. I want proof and matcos bullshit about thin hammers is just that bullshit.
HunterCO1 1 year ago
The new Mg325,you will have sent in repairs due to the Hammer mechanisms breaking which is a huge problem.No one will get me to use Snap On Impacts,Have been using IRs all my life and always will.My Matco dealer still takes Snap On impacts on trade and sells them dirt cheap.One needed to be sent in,anvil seized right up.
wafrederick 1 year ago
@wafrederick Once again your a stupid lying dipshit. First off you fucking idiot it has the very same hammer mechanism as the mg31 its the same gun except they upgraded the motor to 8 vain and tappered the front of the houseing to get in tighter places. I had my mg31 for 8 years and it still worked perfect I sent it in because the front seal started leaking.
Now go suck matcos dick some more you fucking idiot!
HunterCO1 1 year ago
@wafrederick Also you stated your daddy has a shop so that means your just a little boy and have not used shit. I have been wrenching for over 20 years for a living jackass so give up your bullshit.
HunterCO1 1 year ago
You better watch it or I wil report you!The MG31 that was taken on trade had no power and another person on my Matco dealer's route did this.Plus some Snap On dealers can be really pricks,treat their customers like shit.
wafrederick 1 year ago
@wafrederick Report me all you wish your full of shit I have put my mg31 up against matcos shit impacts and it smoked them I also have put my mg725 up against them same results. I now have the mg325 so go blow smoke up someone elses ass.
HunterCO1 1 year ago
My father is no moron,you are disrespecting a US Marine veteran.My father is no backyard mechanic and has done this for a long time knowing he has done this for a long time.One more thing,I did see my Matco dealer did take a MG31 on trade on Friday for a Matco impact.Put my IR2115TI vs the MG31,My IR2115TI will win.
wafrederick 1 year ago
@wafrederick you mean your daddy sucks the matco dealers dick and therefore you like them also. I know for a fact your full of shit since I have put the mg31 and now my mg325 up against matcos impacts and they won hands down. Now go run along little robby and get your ass on that short bus.
HunterCO1 1 year ago
I am not full of it.My father does not need vendors coming in late,this is the way he takes care of it.Called Snap On on this dealer and would not do a thing,their service sucks.The transmission jack never gets used anymore,have two autoparts store cheapies that have put this Snap On to shame.This dealer my father kicked out even got drunk one night and smashed the shit out a Matco toolbox in great shape on trade with a few customers.My Matco dealer received this info from a customer of his
wafrederick 1 year ago
@wafrederick your father is a moron he is a back yard mechanic nothing but a moron nothing more needs to be said you proved my point. Thanks for playing!!!!!!
HunterCO1 1 year ago
This dealer still comes around and my father kicked this dealer out for bad service,came by after working hours.My father owns his own shop and most of his snap on stuff is junk.Has a transmission jack this way made by Lincoln which are POS jacks known for leaking,this one leaks.My father is telling the truth and hates vendors coming in late.Snap On takes too long on things.Have a torque wrench in for calibration sent in by another dealer down the road.
wafrederick 1 year ago
@wafrederick robby no need to talk out your ass any more just admit your a fuckiing idiot! Tell your daddy real techs can take care of those things we deal with it all the time and most important your full of shit now get over it!
HunterCO1 1 year ago
My father has,dealer he kicked out would not warranty anything worn out.This dealer still does this,Guys on his route have drawers full of worn out tools this dealer will not warranty.This dealer told my father anything worn out is not covered under warranty.Some dealers can be real pricks.A dealer would not go into two area in the Ludington and Manistee,Mi area.Even in the White Cloud,Mi area,Snap On dealer down the road in my area decided to take it.
wafrederick 1 year ago
@wafrederick My guess is nobody buys anything from him ever so he says the hell with that shop. My mg31 front seal started leaking after 8 years I sent it in twice for repair cost me $118 and it still leaked so my dealer called the district manager and they gave me a brand new in the box mg325. So I paid $118 for a brand new $400 impact so I guess snap on does stand behind their products. Your father is not telling you the whole story.
HunterCO1 1 year ago
@wafrederick One more thing just to be fair I have never had any problem getting anything warrantied from any dealer this includes matco, snap on, mac and cornwell. The problem with matco, mac and cornwell is they are hit and miss I have went years with out those dealers yet I have never worked at any shop that did not have a snap on dealer.
HunterCO1 1 year ago
Snap On is having warranty problems galore.There are dealers not wanting to warranty anything broken with this excuse: Not purchased from me.
wafrederick 1 year ago
@wafrederick Never in my life over 20 years in the biz have I every had a problem getting anything snap on warrantied........Try again. Snap ons 1/2' impact is lithuim ion same as matcos.
I have put my mg31 and mg 725 up against matcos and it smoked them you cant bullshit me I do it for a living remember.
HunterCO1 1 year ago
I am talking about the air tools,not cordless tools.I seen another Snap On impact on trade todaywhichn my matco dealer took on trade.Matco has the bettert batteries over the Snap On for the cordless,do not use Ni Cad batteries anymore.
wafrederick 1 year ago
It is true,Snap On's newer impacts have very thin mechanisms.My Matco dealer took on one trade seized up.With a Snap On you swear by them or swear at them.It is a common problem.IR is a well known name and Nascar pit crews use IR impacts due to reliability
wafrederick 1 year ago
@wafrederick robby give it up already its getting old! I do it for a living and your bullshit wont work I know from experience. IR makes good air tools back in the day nobody could touch them however snap on has taken over and they are on top.
HunterCO1 1 year ago
@wafrederick Why dont you ask your matco dealer to put their cordless impact against snap-ons then get back to me.
HunterCO1 1 year ago
IR still makes Matcos impact wrenches to Matco's strict specs.My father tried a Snap On impact wrench once,nothing but a huge POS.Sent in for repairs most of the time.Told the dealer he had to give his IR231 back.I will only use IR impacts,been reliable,can't kill them and easy to rebuild.
wafrederick 1 year ago
7 vain motor really how the fuck do you balance an odd numbered vain motor? I will put my mg31 against that over priced matco shit any day of the week not to mention 7 vain LMFAO.
Matco must be desperate to put a stupid bimbo in their videos why not let us techs say what we think?
HunterCO1 1 year ago
@HunterCO1 your mg31 will lose.Matco's impacts are made by IR which are the best impacts out there.Snap On can't keep up with IR for power,SO's impacts known for breaking hammer mechanisms because they are way too thin.I have seen snap on impacts that my Matco dealer took on trade
wafrederick 1 year ago
@wafrederick Hate to break it to you but I did put it up head to head and it won. I then listened to the matco guy tell me there 3/8" cordless has more power than snap-ons so once again I told him if it beat the 4410 I would buy it. Matco advertises theirs has more ft ilbs of torque and guess what on the matco truck the ct4410 smoked matcos. Also your full of shit IR does not make matco's air tools anymore.
HunterCO1 1 year ago
@wafrederick One more thing your bullshit posts all over youtube about snap-on haveing thin hammers is bullshit also had my mg31 for over 8 years use it everyday all day long and the front seal finally started leaking they could not repair it so they gave me a mg325 for the price of what they charged to repair my mg31 $118. You must be robby's twin brother.
HunterCO1 1 year ago