E8400 400x9 3600MHz BIOS Settings P5K-E

[MrNeowarrior]

can u help me with bios update for p5k se? i really need a guide.. i had install a new processor. E8400.. but i need to update the bios to unleash full power.

[woodman991]

I have the same processor as you, and the same motherboard, can I use the same settings as you, or do I have have the same ram too?

[RickArter]

@woodman991 You can try same settings but all hardware is diff so might not work. If your RAM can do same speed/timings should work.

[butolina]

i have this motherboard and a q6660 GO and i cant pass throw 3.0GHZ without my pc crashing in assassins creed 2 for example.. -.-

[RickArter]

@butolina Q6600 is way different then this chip. Might need more vcore or bit more NB volts.

[zappload]

southbridge 1.05 volt ??????? wtf the minimum is 1.50 voltage =)) how did you do that ? :))

[RickArter]

@zappload This board had min at 1.05 some have it higher iirc.

[whitestripe66]

Thx very much. Works very fine :)

[MaCzzang]

no need to change nothing with the voltage??

[Vaculiklukas]

thx

[SirOMFGlich]

do you have it on a "steckdosenleiste"? dont know the word in english. My pc does it, too, because there is a steckdosenleiste.

[djangelo1991]

nice.. i have this TOO !!! but my computer when i started comes this: ON OFF ON and bootet  !!

why comes on off on ?? -.- strap problem ? i have no idee -.- please help me

[timmy9632]

@djangelo1991 dw it's normal.

[Galaxytwix]

@djangelo1991 I have same from asus

[DeltaForceSFODD]

So how fast did you end up getting this to go?

[RickArter]

Check my vids/channel: stable 24/7 got to 4.05ghz on p5k-e and bench was at 4.41ghz

[NubHubGaming]

I have this CPU, 3.6 is barely a overclock. All you have to change normally is FSB.

[fitimshaqiri]

hi  i have cpu core 2 duo 2.4 + 9600 gso + 2gb ram + motherbord p5k how can i ovecloked

[CrackersBest]

i whant to buy a e8400:D but for overcloking to 3.6mhz !..what cooler u have? ore the source of energy..! can give me details need to making a strong pc:D

[krainsyafiq95]

sunbeam core contact freezer

[notToast]

cool i have the same OC 400x9

[BATE1293]

you asking me?

[neo8183899]

what voltage you need in a e8400 to reach 400x9= 3600mhz with stock air cooling ? voltage stock is 1.2v right ?

[WakeupFFS]

stock is 1.3

i run my E8400 at 4.41 and its 1.350 v

[BATE1293]

Hello Can i overclock my E8400 to 3.6 Ghz with a stock intel cooler? Right now the temp is 36C with 3Ghz

btw. i have a raidmaxx Smilodon (very good cooling)

[bigjon518]

Nice stuff dude, you gonna try and aim for 4ghz on air?

[RickArter]

Sure are stressing at 3737mhz 415x9 at 1.224v with 53c temps now.

[bob333336]

wait wait wait! U CANT ENTER UR OWN FSB NUMBER?????? wtf.... get a new mobo man

[RickArter]

That was for the strap not FSB that is 1mhz increments like others.

[bob333336]

come on can do 4ghz safly

[sushiboy805]

5/5 too as always

[smiledgamingfreakz]

Nice mate 5/5 as always

[sushiboy805]

hey wat processor do u have

[smiledgamingfreakz]

u asking me?. i have a E4500 c2d

[RickArter]

I have a E8400? and had a E4500 and a 2180.