Hi. I've made one Tabletmod kit too, and I was wondering how you were able to attach Ergatron arm without problems.
I haven't installed it yet, but the acrylic material is very brittle, and the LCD controller kit is attached to the main case only with 4 zip ties. How is the entire build hold up 15 lbs?
ive read the spec at tablet mod kit. u use 15,4 inch lcd panel on top of 15,1in active area of intuos 4 large. is there any difficulty in calibration since there are 0,3 in differences in size?, thanks.
@erufan95 There is a bit of calibration fun. My recommendation is to just play with it till you get something that works. sometimes you have to adjust (And from my tablet in question, i tend to go a cm higher than the screen.)
Could you please go into more detail on your set up, ive yet to buy a cintiq and im still a bit fuzzy on which one to buy. My current choices are the 21UX and the 12WX, however yours looks totally different to both of those, it looks better. Also yours looks like its suspended on some sort of stand, if you could foward me a link to where i can buy that same cintig and stand ill be eternally greatful as you seem to have the perfect set up. Thanks
@jjaycallejas Sorry, I didn't notice this post or i would have replied earlyer. First, it's the game, not the book, for the PC.
The jitter isn't an issue at all. I've found no problems with my linework with it, my concern comes from the limitation on colors (Or..colours) so i've been fighting to get them to match right to my other monitor. I like my Ergatron setup, as i also have the clip on addon. The problem that comes up is being gentle with it so I don't break the enclosure.
@Raptor3k how large is the color discrepancy would you say? Is it just a slight annoyance or a glaring mismatch? It's my experience that color shift between monitors is to be expected. but if your using the tabletmod for print production, I can see the concern. Otherwise, the only way I can see you achieving true color fidelity is with a fancy photography calibrator.
Do you mean the enclosure seems brittle, or just being careful with the ergatron/enclosure connection?
@jjaycallejas Color difference only seems blaring on some colors, but i think my monitor is off from print anyway. It's close enough though for what is needed and if any fine tuning needs to be done, it can just be done on the other one. As for the enclosure, it's mostly the fact that I used straight up super glue that.... well... I think i should have tried a stronger adhesive.. tempted to mod mine further with some metal 90 degree brackets or something to keep it together.
Hi. I've made one Tabletmod kit too, and I was wondering how you were able to attach Ergatron arm without problems.
I haven't installed it yet, but the acrylic material is very brittle, and the LCD controller kit is attached to the main case only with 4 zip ties. How is the entire build hold up 15 lbs?
sinefinehabitarevolo 16 hours ago
where do you buy this ?????? please tell me kuz i need/want one :(
Randomsilly 2 months ago
@Randomsilly This maybe a frightening concept, but reading the description should be all the info you need to begin. It's below the video.
Raptor3k 2 months ago
This has been flagged as spam show
ive read the spec at tablet mod kit. u use 15,4 inch lcd panel on top of 15,1in active area of intuos 4 large. is there any difficulty in calibration since there are 0,3 in differences in size?, thanks.
erufan95 2 months ago
@erufan95 There is a bit of calibration fun. My recommendation is to just play with it till you get something that works. sometimes you have to adjust (And from my tablet in question, i tend to go a cm higher than the screen.)
Raptor3k 2 months ago
Comment removed
erufan95 2 months ago
I'm am Look Wow , this name ?
SafeyahALKaheedan 2 months ago
Is this just a regular one but it's built by you, or what is Raptor? XD very nice drawing :)
plektrum93 3 months ago
whats the diff. between this and the normal one
freakofnature1yo 4 months ago
@freakofnature1yo It's made by Raptor, for Raptor. :-P
Raptor3k 4 months ago
@Raptor3k and raptor is?
freakofnature1yo 4 months ago
Do you sell one of those, already armed?
Phenriel31 4 months ago
you wouldn't be good at shooting porn. you're covering everything with your arm.
GinoZump 7 months ago
Could you please go into more detail on your set up, ive yet to buy a cintiq and im still a bit fuzzy on which one to buy. My current choices are the 21UX and the 12WX, however yours looks totally different to both of those, it looks better. Also yours looks like its suspended on some sort of stand, if you could foward me a link to where i can buy that same cintig and stand ill be eternally greatful as you seem to have the perfect set up. Thanks
SamHain1031666 8 months ago
@SamHain1031666 Go to the website that's on the enclosure. It isn't exactly a Cintiq. It's a Intuos 4 Large with a LCD.
76Cent 6 months ago
certainly his arm can not take it. posture, lack of support
GeorgesDuarteCosta 9 months ago
@GeorgesDuarteCosta I'm actually adjusting my desk setup, so maybe that will get a touch of improvement..
Raptor3k 8 months ago
So hows your experience with the jitter dilemma? I want to build this right now but want to know about others experience with it.
cool setup you got going on there by the way. using that mass effect art book for inspiration? oh yeah, how does that ergatron feel too?
jjaycallejas 10 months ago
@jjaycallejas Sorry, I didn't notice this post or i would have replied earlyer. First, it's the game, not the book, for the PC.
The jitter isn't an issue at all. I've found no problems with my linework with it, my concern comes from the limitation on colors (Or..colours) so i've been fighting to get them to match right to my other monitor. I like my Ergatron setup, as i also have the clip on addon. The problem that comes up is being gentle with it so I don't break the enclosure.
Raptor3k 10 months ago
@Raptor3k how large is the color discrepancy would you say? Is it just a slight annoyance or a glaring mismatch? It's my experience that color shift between monitors is to be expected. but if your using the tabletmod for print production, I can see the concern. Otherwise, the only way I can see you achieving true color fidelity is with a fancy photography calibrator.
Do you mean the enclosure seems brittle, or just being careful with the ergatron/enclosure connection?
thanks by the way
jjaycallejas 10 months ago
@jjaycallejas Color difference only seems blaring on some colors, but i think my monitor is off from print anyway. It's close enough though for what is needed and if any fine tuning needs to be done, it can just be done on the other one. As for the enclosure, it's mostly the fact that I used straight up super glue that.... well... I think i should have tried a stronger adhesive.. tempted to mod mine further with some metal 90 degree brackets or something to keep it together.
Raptor3k 10 months ago