@canugoanyfaster pull the slide back to where the little notch on the slide is lined up with the pivot point of the safety lever. Hold it here and you can rotate the safety lever back in the opposite direction. this should make the firing pin poke slightly out the back, if not, pull the slide back a bit until it does, then you should be able to get the slide off by pulling back and lifting upward. be careful not to lose the pin that will likely pop out (small black rod).
How do u take the dam thing apart I've tried every thing to get mine apart
canugoanyfaster 3 weeks ago
@canugoanyfaster pull the slide back to where the little notch on the slide is lined up with the pivot point of the safety lever. Hold it here and you can rotate the safety lever back in the opposite direction. this should make the firing pin poke slightly out the back, if not, pull the slide back a bit until it does, then you should be able to get the slide off by pulling back and lifting upward. be careful not to lose the pin that will likely pop out (small black rod).
cwire4 2 days ago
i have the same gun do have any idea where i can buy a clip for it.
1luis4wero 1 month ago
I will do a better review on this and my other guns later this was my first attempt and i needed 3 hands
lordbuttonial 1 year ago