Motionboardshop.com - Fullbag Topmount - How to pick a longboard

[evhguitarstv43608]

hey motion, i was just wondering what bushings you think would be right for me out of the venom bushings. i am a very light kid, 80 pounds, and im righding bear stalk bushings on my 852 bear grizzlies. i was thinking of geting a barel and cone shr cuz i want a turnier settup. also i was thinking of getting a harder boardside bushing for stability and the cone bushing softer. the only problem is, i dont know what durometer is right for me. any suggestions? btw, ive never bought bushings before.

[theLEMONsquad112]

do you guys have free shipping internationaly?

[NewmanNugget]

39 inches long*

[MotionBoardshop]

@NewmanNugget

This video is is about 10 months old, it is possible that Fullbag changed the design of this board recently.

[cmwells55]

how are mini logo bearings? i used to ride swiss 6 bearing and absolutely loved them. never heard of mini logo but my board got stolen so i'll be replacing it with you guys soon haha

[MotionBoardshop]

@cmwells55

Mini Logo bearing are made my the same exact people as Swiss 6 are. They are a very good and cheap alternative!

[6cmh3]

if the purple bushings are eliminators that would be weird because i would have the exact bushing setup as this video.

[Longboard914]

What size wheels would be the maximum diameter for this deck? (Centrax?)

[Fortune2point0]

@Longboard914 Depends on the trucks.

[MrLetsskatenow]

Warp

[rex8642]

would you get bite with randal 42* with 77mm centrax?

[NelsonLongboarding]

@rex8642 yep

[MrDamodalamo]

hey guys, i have a wolf shark and i dont really like it, i was wondering what i should get, i was thinking like tm 37, fullbag elise, or kill switch ? all opinions would be great, also a recomended setup would be nice thanks :DD

[rh1gnarceros]

@MrDamodalamo get some steeze, the wolf shark should be great then

[Spoonclan]

please do a reveiw on the tm 37

[Jraks656]

would this work with some monster hawgs 76mm 78a

[snowandskiwinter]

as u can see its 40 inches..... your right my eyes do instantly work as rulers

[LosMarinerosPR]

what are you guys located

[yiengerbombs61]

@LosMarinerosPR seattle

[MrBruceyJuicey]

what are your views on the longboard make: Bustin Boards?

[ENVlongboards]

@MotionBoardshop

Avenger or the Elise??? plzz answer

[PaintBalla701]

"as you can see it's 40 inches long" -lolz

[rockthecot]

ok 2 questions: would the deck fit 83mm wheels? and also i weigh 150 what duro bushings would you recommend for wicked stable dh?

[Poonsafe]

Would the setup be similar for the 37 model?

[WolfSharkk]

some ones got the sniffles.

[BlueXorcist17]

would randal 180mm be good on this beast ? :D

[MrJoey2miles]

WHICH BOARD WOULD BE BETTER FOR TECH DOWNHILL AND FREERIDING? THE FIVE MILE A-10 WARTHOG OR THE FULLBAG SPEEDSTYLER???

[COSxIMxAxBAWSS]

@woolerymasst probably go for a bit shorter topmount (37ish) and tinker with the setup to your liking

[woolerymasst]

is this nice for freeriding as well as dh

[VanHalenlvr2012]

Okay, can somebody please help? I'm looking for a good top mount speed board and i was seeing the Fullbag top mount and the comet voodoo, does anybody have experience with both of these. Any input would be greatly appreciated.

[Itakazookie]

you guys need to carry jati boards. DO IT

[VanHalenlvr2012]

@Itakazookie they do

[Itakazookie]

@VanHalenlvr2012 oh well theyre not on the website so I just thought they didnt

[VanHalenlvr2012]

@Itakazookie Yeah, that's my mistake. I mixed up jati and blackdog, they both look the same in my mind because of the natural wood. haha

[denzuchiha]

Please do a review of the Elise!

[NanaimoLongboard]

do you guys have any nelson boards in stock??

[MotionBoardshop]

@NanaimoLongboard

We do not, not yet at least

[adrher1]

can u kik flip with these?

[mattroberts96]

have you got a review and setup tutorial on the full bag elise and longboard larry manatee?

[bodyboard2444]

how much for just the deck

i found one for 228 is that good or what??

[WhosGotBigDicks]

would it be a good carving/cruising board if put on randal trucks at 50 degrees?

[diegelin123]

will otang 4pres work on this board?

[MotionBoardshop]

@diegelin123

you bet!

[watchandlearnLboard]

@MotionBoardshop hey guys! what would be the best topmount symetrical freeride board that i could run my trucks loose as helll? thanks

[MotionBoardshop]

@watchandlearnLboard

look into the eastside rocky bomber mang

[monkieboi88]

@willm995 better bushing seat and more precise axels. I still like randals tho

[willm995]

Why would you put on paris hangers instead of keeping the randal hangers?

[phonedogfan]

hey would paris 180 work on a sector9 carbonite?



[TorinGlasenapp]

"Always wear your helm..."

[EpikCupcake]

a lot of people tell me that those Mini Monsters aren't good for sliding....is this true???

[narfamillion]

Verryy Verryy gooood,= paris truck bushings are shitty and crack, and ASIAN!

[thenewguy11111]

hey can you guys do a video on bushings? i dont understand them. . .

[DHland]

what do you mean when you call them "sugary thane" is that opposed to like slick? perhaps something to do with the particle size?

[TheWhitestSnow]

Do you think this board would be good with surf-rodz 200mm? :)

[EpikCupcake]

can this board freeride well

[GreenDayRocks0000]

I have a question:

I am 13 and want a longboard BAD!

What do you Think i should get?

Greetings from Israel!

[MetalHeartsOfSteel]

do you ship to sweden?

[mcjimmy3333]

"catchin a wheelbite and goin down at 50" hahaha awesome

[monkieboi88]

can you guys do an episode on the comet voodoo?

[CarveCraver]

I have an Earthwing Myster Model currently set up with Randal 42s. If I put Paris 195s hangars on the 42 baseplate, would I avoid wheelbite with 70mm wheels? Could I go up to 75mm?

Also, what duro are the Divine bushings in the Paris 195s?

[doum188]

The guy look like FUCKING gay

[ConedWheels]

Think this deck would be good with some 200mm trucks?

[MotionBoardshop]

@ConedWheels

for sure!

[francehillbombing]

@MotionBoardshop

i have a pasris hanger and randaol 42s but it doesnt work

can you help me?

[BoardsJamsLeaves]

@francehillbombing push really hard

[itsryderbetch]

i have paris 180 trucks can i put the randal 42 base plate on them

[MotionBoardshop]

@itsryderbetch yes it will work.

[monkeyman2578]

what about short wheel base

???

[monkeyman2578]

what board should i get for carving and what trucks and wat wheels also i am 1.52 meters tall and i whigh about 55

[MotionBoardshop]

@monkeyman2578

Do you like flex? Do you like shorter or longer wheelbases?

[monkeyman2578]

@MotionBoardshop i dont relly like flex and i like long wheel basses and i just want it for crusing and carving with it

[MotionBoardshop]

@monkeyman2578

Take a look at the Landyachtz pinner or totem. Both are really solid boards and should definitely suit your needs.

[MotionBoardshop]

@monkeyman2578 well if you doint like flex the the topmount from fullbag will be an excellent

[foreheadiumal]

how bout de-wedged indy 215s on this baby? :))

[MotionBoardshop]

@foreheadiumal if you want to be low trendy and stable mby all means do it, we have seen a sruge of people buying indy 215s for dh, i dont know about those trucks but lots of my good friends swear by the vertical kingpin design.

[studdlyrockwell]

ah he matches, how cute...

[Noob12310]

Do you have free shipping to Richmond BC canada?

[DPerjar]

What is sugary urethane?

[MotionBoardshop]

@DPerjar great question. Sugar urethane is sort of needs interpretation of a worn wheel that has less of an oily feel. For example, check out a worn down monster hog from landyachtz, it still has sort of a slippery feel. Check out a coned out free ride wheel from orangutan, and it sort has a dry feel. That dry feel is what we call sugary. The new zombie hawgs have this sugary feel and a slide butter smooth, with no chatter

[MotionBoardshop]

@DPerjar a urethane like the orangatang urethane, or the monster hawg urethane

it is a smoother sliding urethane, if you look at a wheel like any of the old school thane from abec 11 it is a sugary urethane, unlike big zig urethane which is much more oily

[11xXDANIXx11]

@DPerjar i think its like surgary pop tarts?

[brutalback]

@DPerjar I'm guessing when the wheel is scrubbed, it will have a sugary texture to it.

[maallenmi]

@writethetype No you're wrong, they fit perfectly.

[MotionBoardshop]

@maallenmi Respectfully, I totally agree with you maallenmi. Writethe type you should try it out and I think you'd be surprised. We set this truck combo up on about 4 to 5 decks a day.

[writethetype]

paris hangers arnt meant to be ridden with randal plates, paris hangers are meant for paris plates and randal plates are meant for randal hangers. Apparently what they teach you at silverfish is that if you mix and match trucks it is automaticly a better trucks. The 2 trucks have different pivots, they dont fit right if you mix them.

[ashpaw2]

@writethetype shut up

[cuzz467]

@writethetype

silverfish trends aren't always bad!

of course pairs hangers are meant for pairs baseplate's!

now it just happens that quite allot of people on sliverfish like the mix of pairs and Randal!

[FortunexenutroF]

@writethetype They fit fine. I've been using Prandals for quite a while, never had a problem.

[naturalherb]

do you ship for free international?

[Heckasuperduper]

always wear your what? jk

[BoDzor]

Take a deep breath before starting to speak, than speak, it sounds as if your rushing it too much and trying not to breathe

[TwiceVicodin]

@BoDzor he loves longboarding that much. let him be

[BoDzor]

@TwiceVicodin Yes, but it would be much more understandable if he took a breathe when speaking.

[hawaiiSpeeDemoN]

hmm I might get one of those