Snap-on Tools - Car Crusher Toolbox Testing - A Real TKO

[879twist]

i thought he would try crushing the snapon box after wtf

[medievalman86]

why not put the snap on in? because- its simple. the point of this video, is not wether you can push your tool box fully loaded off a 100ft cliff and still have a working box.. the point is not which one crushes first, the point is not if you can put a dump truck on it even......becuase- WHO does that in real life? the point is can your tool box- be it mac, snap on, proto, cornwell, etc. survive 30 years of continually being opened and closed, moved, rolled,, and opened some more?

[fatboybmx87]

why dont you put a snap on box in a car crusher.

[12344richard]

put that snapon box in the car crasher it do the same as the matco

[YourLatinLover69]

How about crushing the snap-on toolbox?

[jonbiggunmatco]

Take a look at my page you ignorant snapon coolaid drinking hunterCo1. A big rig caught on fire next to my customers MATCO toolbox. The rig melted to the ground. The concrete around the Matco box had to be dug up and replaced. The box still workes and 80% of everything inside came out unscathed. That is real talk, not name calling and cursing at people. This vid is them testing their products, not real world. Snapon is a good product, but there is a reason why fortune 500 says MATCO #! tooldist

[HunterCO1]

Why dont the original poster put the entire video up? What a load of shit search youtube for the full video.

[RANS87IROCZ]

And let me guess the Snap On box would held up that press, and wouldn't been crushed? right, and thats right I drive my tool box down the street so I must need to it put through a crush or crash test? by the way I own a Snap On box, I think I paid more for it then my car, go figure

[HunterCO1]

@RANS87IROCZ The reason snap on did that was because it was a jab back at matco since matco threw a snap on box off a two story building. Second you must learn to listen after the car crusher he said "Does that really prove anything? Nope!" He then went on with the actual tests that a real tool box would go through.

Don't be stupid and pay attention to what is said.

[RANS87IROCZ]

@HunterCO1 I did listen to what he said.what did it prove? not a damn thing I just wanted comment. and yes I seen the other video by Matco. I'm glad both these companies can throw away 1000's of dollars on such pointless test on each others equipment in hopes they can sell their overpriced shit to one of us. it doesn't matter to me. I own a Snap On box myself. if you ask me, did it really take 6 grand to make one box? they got my hard earned money! ohwell. that was my choice for being stupid

[HunterCO1]

@RANS87IROCZ Your right stupid people should not own qaulity tools sell your snap on box and go buy waterloo I am sure a professional would be happy to buy your box!

[RANS87IROCZ]

@HunterCO1 well I had a MAC box I bought little over a decade ago. it was a very nice box. And for for the most it was only a little smaller then my Snap On. It was half the price and just as nice(to me) Snap On guy would bug me every week about upgrade. I didn't need a new box. but I said what the heck at some point I had tons of tools, and Mac box was getting a little crowded. I do like it. but if was another name I'm sure it would serve me aswell, aslong as its big enough for my tools

[dregsta]

10 g's for a box lol u can keep it

[thspamed]

I really liked this. it was ..sweet.

[M0RTaLK0MBaT68]

@robby844 dude im not even gonna read all that youve posted but thank God im not the only one who has common sence, if you like read my argument with HunterCO1, he actually thinks he knows everything because he likes snap on its quite amazing. thumbs up to you!

[jonbiggunmatco]

@ hunter. Your comment shows that snapon customers have very low IQ. Don't forget your helmet today, little buddy.

[9b8]

Uh, aren't some Snap-On tool boxes made in Canada, and is stamped clearly on the label? I saw multiple on ebay like that. Maybe they were older boxes and I don't remember the model right off hand. Made in North America, OK. Made in the USA, eh, not quite. Perhaps its just the semantics of "America."

[M0RTaLK0MBaT68]

SNAP ON IS OVERPRICED AND THEY ARE NOT WILLING TO TEST THEIR PRODUCTS AGAINST THE BETTER COMPETITORS.this commercial proves this entirely.

[HunterCO1]

@M0RTaLK0MBaT68 let me guess you don't own any snap on tools and are mad little boy? maybe if you talk in all caps your harbor freight shit will last! LOL

[M0RTaLK0MBaT68]

@HunterCO1 haha yes i do own a few snap on tools, when i posted that the caps lock was on and i didnt really want to retype it all. and i still stand behind what i said about overpriced and its clear that in all their commercials not one of them actually has a test of their tools. i dont own any harbor freight only a craftsman, mac, very little matco, a few snapon and some kobalt.

[HunterCO1]

@M0RTaLK0MBaT68 Shut the fuck up retard you proved me right. They don't need to prove anything in their commercials as people like me that have used them as well as other brands know there is nothing better. Go play with your craftsmen and cobalt which are ok tools for someone like you that don't do it for a living.

[M0RTaLK0MBaT68]

@HunterCO1 easy there you know nothing about me i see no reason to start cussin, but i do this for a living i am a diesel mechanic for heavy duty trucks and equipment

[HunterCO1]

@M0RTaLK0MBaT68 Your full of shit plain and simple if you did it for a living there is not a tech on earth that will not admit snap is stronger and out lasts any hand tool on the market. Snap on has a patent on the tool steel they use. I started out with mostly craftsman 20 years ago and got tired of busting shit non stop and going to sears to warranty it. I broke my craftsman 1/2 flex head ratchet at least once a week bought a snap on that was 15 years ago and have never had to warranty it.

[M0RTaLK0MBaT68]

@HunterCO1 Im done with you clearly you dont understand anything

[HunterCO1]

@M0RTaLK0MBaT68 I am glad your done and don't understand anything maybe someday when your a tech you will. In the mean time you could go hang with robby844 and pretend.

[jonathanevans1990]

@HunterCO1 umm I do it for a living and i actually use craftsman and cobalt my 2 main brands....

[HunterCO1]

@jonathanevans1990 Jiffy lube and econolube are not the place real techs work. In a real shop you make money and don't fuck people and there fore can afford real tools. There is a reason people like you have craftsmen and kobalt your a shit tech and don't get paid much.

[jonathanevans1990]

@HunterCO1 will you are right i don't get paid much because i just got out of school . but I got my Ase and and am a apprentice at a Honda dealership. Tools don't make the mechanic they just make his life easier i love my tools and they are good to me because i care for them. I will buy some stuff from snap on or mac whatever i like but for now with my budget i got what i can afford craftsman and kobalt make some nice tools good for the price.

[HunterCO1]

@jonathanevans1990 I already new you were newbie or you would not make such dumb statements good tools make all the difference in the world and when you get some experience you will understand this. I started out over 20 years ago with all craftsmen so I know how it is but I would'nt wipe my ass with craftsmen, kobalt or any of them today. Oh yeah and ASE dont mean jack shit I have seen so called master techs that are complete fucking morons.

[jonbiggunmatco]

They didn't want to crush the Crapon box b/c the flying pieces might hurt the camera man. Every time Matco puts out a video Crapon sues them to take it off air. Matco doesn't need to play these childish games, they know they have the best box in the world. BAR NONE.

[HunterCO1]

@jonbiggunmatco  wow your a moron. LOL robby is that you LOL

[GarrettJDB]

I really liked that matco box better than that red snap on Box

[nelson4568]

i have an old snap on tool box that was handed down to me when my grandfather died...it held up pretty well alittle rusty but for someone who just works on their cars in their garage and does weekend oil changes, belt changes or tighten ups or nothing too serious i would be fine with a craftsman but if i was to own my own shop i can understand why many chose snap on

[JpSnareGuy]

The plastic that is supposed to keep the drawers closed is junk !!

[cesmegi1]

@JpSnareGuy I own a 75th anniversary edition box. replace 2 so far. worn out. warrantied with no questions asked. ( bought the box in 1995). I guess it depends on the environment.

[cesmegi1]

IR = Assembled in the U.S.A. - Not Made in U.S.A. ....check again sunshine.. I thought you said you only bought Craftsman anyway??? Hahaha

[robby844]

@cesmegi1 uh yeah i said craftsman tools asshole not shitsman air tools.id buy snap off before i bought shitsman air.and no thew ir tools i own are made in the usa.

[cesmegi1]

@robby844 you're funny

[robby844]

@cesmegi1 im funny because you cant read.all you snap on assholes are the same.you fags arent even real mechanics

[bripolar]

if this video was supposed to make me like snap on boxes then they failed miserably. i actually like snap on boxes less now. way to go guys! a matco 5s series box is better than any snap on box including the new EPIQ line. the 6s series is far and beyond anything snap on has even dreamed up yet. i must say that snap on has killer hand tools tho. even though they cost more than everyone else their worth it. because of this stupid video, you guys have stooped to a new low.

[kawasaki000000000000]

come on u crushed the other boxes and i bet that if some guy was loaded and he spent the cash and put ur box in the crusher it would crush just as good as the others . you also think you guys are the very best too have best tools ext well there are other companys like mac and matco ext . y buy a scocket for 30 from snap on when u can get one from canadian tire for 7 maby if that and they have life time warrenty too so thats all i got to say

[robby844]

hahaha both boxes are made in the same factory hahahahha

[jeffsteadman]

snap off.... :)

[ibnekurdo]

dumb ass guys...it would crash anything...they dont make tool boxes for that kind of use...i can destroy anything,,detroying is easy

[cesmegi1]

@ibnekurdo hey , watch the entire video, listen to what he is saying....read, read, read

[evanccsmith]

Waiting to see how a SnapOn toolbox is supposed to be better...

[Chris07860]

Funny they never tested out the Snap-on tool box

[djekendj]

what a waste!!!

[ZipSnipe]

What a waste of a beautiful toolbox. I bet some poor mechanic somewhere who keeps his tools in a cardboard box could have used that toolbox. Your demonstration only proves how wasteful Snap On is.

[joe39363]

I was making a comment, as I'm free to do, so you can drop that attitude jack

[joe39363]

THIS is the reason their tools are SO overpriced! They have to fund STUPID commercials. They probably don't even build their stuff. Has anyone ever SEEN a SNAP ON or MATCO factory?

[sethdesjarlais]

yes, my uncle works in a snap on factory, he runs a die press for making sockets, so dont talk about something you dont know anything about.

[evanccsmith]

@joe39363

"Made in China to American Standards"

[robby844]

@joe39363 i took a tour of both.so yes i have.only the tool factory.the boxes are made in canada and the factory is owned by a jap company.most of snapons tools are made in china shipped here and they go thru an system that stamps their name and made in usa on them.you can tell the true us ones if the chrome doesnt peel.those tools are very hard to find tho

[cesmegi1]

@robby844 You really need to do more research sunshine...you are incorrect.

[robby844]

@cesmegi1 really.you might wanna do a little more research.your a typical snap off guy.

[cesmegi1]

@robby844 Born And Made In USA.

Snap-on "Masters Series" boxes are still made at Snap-on's manufacturing plant in Algona, Iowa, with American-made components, American-made pride.

[robby844]

@cesmegi1 thats what they want you to believe.is that why the douche i work with has 2 that say made in canada? is that why his fell apart and my waterloo is still together? hmmm makes me think your full of shit mister snap off.

[cesmegi1]

@robby844 Look at the box your friend has... KRA Heritage boxes are built in Canada. KRA Classic and KRL boxes are built in the USA... Why are you so angry?

If his Box is "falling apart" then he should get his Snap-on Dealer to help him..... Yeah ....this is a Big conspiracy....you are right ...

[robby844]

@cesmegi1 snap on wont stand behind cu they know its junk. and hes got a krl and a kra both are made in canada.you should check your shit before you lie like all the snapoff sales douches do

[cesmegi1]

@robby844 Really??? you are too funny :D

[cesmegi1]

@robby844 Where did you get all your Valuable information? Harbor Freight?

[robby844]

@cesmegi1 hahaah hobo freight. you shop there? wow you do suck.

[cesmegi1]

@robby844 Man, you are angry... Do a little more research on your "Buddy's" tool boxes and learn a little... Read more... It's good for you...

[robby844]

@cesmegi1 typical snap off fan.ill just take that as an apology for you lying about where they are made.why dont you ask your snapoff guy ill get the ones number that told me himself and then you can call him.hes been to the factory where both the matco and snapoff boxes.oh snap yes they are built in the same factory.oh and BTW the boxes are made in america :D since canada is part of north america

[cesmegi1]

@robby844 Please Don't think that was an "apology"...It was not... you wrote earlier that "you toured the plants", did I misread that? KRL Series Tool Boxes are made in the USA. Not "made in America" . keep twisting your words around you are proving to be good at it... Oh wait... are you going to curse at me now?

[robby844]

@cesmegi1 and it doesnt matter if i curse at you because you will just spew more of your bs.quit standing up for shitty tools

[cesmegi1]

@robby844 do a little more research before you judge...In order to be labeled "Made in USA" it must be made in the United States of America. It does not say "Assembled in the USA" like some other company tool boxes. the Discovery Channel had a really good segment on How it's Made. Snap-on was featured. it's USA buddy. Yes there are some tools that come from over seas. Those tools are Marked that way. Snap-on tools is a Global company. Is MAC, MATCO, Cornwell ?

Are they on the NYSC?

[robby844]

@cesmegi1 HAHHAHAH your kidding me right? In order to be labeled "Made in USA" it must be made in the United States of America" why dont you tell chevy that? dipshit im not saying the tools arent us made im saying the boxes arent made here.just more proof you cant read

[cesmegi1]

@robby844 ""Born And Made In USA.

Snap-on Masters Series boxes are still made at our manufacturing plant in Algona, Iowa, with American-made components, American-made pride."" check out the following web site--- ci.algona.ia.us/Fall%2007.pdf

[robby844]

@cesmegi1 blah blah blah website website website lie dickhead.oh and my box is a craftsman made by waterloo.so i really dont give a shit about waterloo stocks

[cesmegi1]

@robby844 Snap-on KRL tool boxes are built in the U.S.A. ...please prove me wrong..so far- all you have done is curse,swear, and hate Snap-on. you haven't attempted to back up your accusations at all. Oh "they're all made by a jap company " in Canada you say-- Prove it... You can't , that's why you just curse, you're not smart enough to find out the Facts. KRA Heritage series tool boxes are built in Canada, KRA Classics are built in Tenn.prove me wrong without being angry. Bet you can't .LOL

[robby844]

@cesmegi1 how bout i give you the snap on guys number and have him tell you? you have also proved nothing.you have just posted websites which have been known to lie.next your gonna tell me that all snap on tools are made in USA but in fact 65% of them are made in china and taiwan shipped here and then they are stamped USA and chromed here.i have owned several snap off tools my uncle worked for snap on after he worked for detroit diesel and he quit when he found out the were just like chevy

[cesmegi1]

@robby844 never said" all Snap-on tools are made here".. in fact- go on your Snap-on Dealer's truck and look for your self. The snap-on tools that are made elsewhere are marked that way. the ones that are made here are marked U.S.A. ... where did your uncle work in Snap-on? Or are you going to dance around that too? still haven't told us what "JAP comp.in Canada that makes all these tool boxes?

[robby844]

@cesmegi1 and no they are not marked you dipshit.only 15% of snap offs tools are marked like you claim.and why should i tell you what company owns the plant.you should know.il gives you a little hint it starts with a D

[cesmegi1]

@robby844 Who, "Danaher Corp" ? The Parent company of MATCO and KD ? LOL

You are right at one point. The F80, S80, T72 ratchets are not marked. Reason - they are for export. Something that many people are disappointed about. Still made here however. Snap-on does Sell around the World. KRL tool boxes are made in the U.S.A.

[robby844]

@cesmegi1 HAHAH nope but nice try.saying that the KRL's are made here is like saying a chevy 3500 HD is the biggest most powerful us made truck on the market.hahahahah you just cant help laughing cuz you know its BULLSHIT

[cesmegi1]

@robby844 I'm laughing because of your funny attempts to prove your case. you haven't even tried... but you do know how to curse.

[robby844]

@cesmegi1 you call sayoing bullshit cursing.wow how old are you? 5? all youve done was post stuff off websites.and that is all bullshit.

[cesmegi1]

@robby844 Show me your proof of KRL tool boxes not being built in the U.S....you can't. can you? Tell us about these tours you took of Snap-on Plants. Tell us the "JAP" company you claim that makes Snap-on's Boxes. you Can't. Who cares about Chevy? You're funny.

[robby844]

@cesmegi1 im the funny one but yet i have proved you cant read.i told you about the tours at the plants.i told you the only thing they made at the plants were tools.oh but did i forget to mention that i did see a truck with snap offs name on it unloading at the plant and the boxes had "made in china" stamped on them and when they opened the boxes and dumped them into a bin to be stamped and chromed they were wrenches.or maybe its highly possible that it could have been misspelled and it said

[robby844]

@cesmegi1 "made in chino" which is in so cal right down the freeway form me.but i dont think asians would lose face over something that they made.do you? i mean what is the problem with your little snap on fag ass admitting that its made in canada.you have no problem admitting that the other is.oh and the "D" company im talking about has been "on the low" for a couple years.i know you will find it since you claim your so smart.but all the guys ive worked with that have snap off tools are really

[robby844]

@cesmegi1 dumb and dont know shit when they see it.

[cesmegi1]

@robby844 Which plants did you Visit?

Where did your uncle work in Snap-on?

What is this "D" company you are talking about?

KRL tool boxes are built in the U.S.A (Algona Plant) the State is Iowa.

[robby844]

@cesmegi1 my uncle was transferred between 6 different plants. INCLUDING the one in ontario that builds your precious pos boxes.all you snap off guys are the same.oh and for the company try daiko.

[cesmegi1]

@robby844 Daiko is like saying "Smith" in Japan . that means nothing. don't believe me? Look it up...please explain more. Canada builds the KRA Heritage Boxes / I agree. Transfered between 6 plants, What did he do there that he couldn't stay in one plant?

[robby844]

@cesmegi1 he was the "team leader' and they sent him all over to clean up peoples shit. and no daiko isnt like saying smith.daiko is daiko

[cesmegi1]

@robby844 tell me more about Daiko..because I simply can't find any info on your company pertaining to tools.

[robby844]

@cesmegi1 wow really? you obviously arent looking hard enough.but im done arguing with a pansy ass wanna be mechanic.

[robby844]

@tech31336 really? so i had no grounds to curse out a pansy snapoff wannabe mechanic?

[cesmegi1]

@robby844 Thank you, that's how people act when they can't prove their case. Google "Daiko" . Tell me what you find. Now stop lying because your nose is pushing through my side of the screen.LOL :)  All I'm asking is for you to give me more info so I can stand corrected. You can't do that.

[robby844]

@cesmegi1 why because your too lazy to make a phone call? or becuase your too lazy to look something up? as i told you daiko has technically been out of business for 15 years but the real shareholder is naiko trades company.but naiko is still the same company owned by the same exact people.so sorry your so damn lazy.oh wait your a snap off guy

[cesmegi1]

@robby844 Snap-on's been in business for 80 years. looked up "Naiko and Daiko"... still nothing to do with tools.. you said "trades company", that is different than Manufacturing. I think you are blowing smoke because you can't give us a definite answer. (everyone is wrong but you, right?)... go back to mopping floors at CAT. your better at that.... then you can tell us how your mops are made in china.

[cesmegi1]

@cesmegi1 correction 90 years

[robby844]

@cesmegi1 hahaha you had to correct yourself so in reality you dont even know.but if snapon isnt the same as matco then why didnt they put their box in the car crusher? you think it might be made by the same company.oh and im sorry i have to spell it the AMERICAN way since your too damn stupid to look it up.neiko-tools.

[cesmegi1]

@robby844 If you have been around for a couple years and ever went on a Matco truck, you would remember the DVD they were showing everyone who came on the truck... Snap-on sued, won, and they had to pull it from the streets. Snap-on came out with this DVD to make fun of Matco's . Ask you Snap-on Dealer for a copy of the entire Snap-on DVD ...Watch...Listen,,,Learn... and yes if , If I make a mistake, I will correct myself. ...Is it "Naiko or Neiko"? make up your mind silly boy.

[robby844]

@cesmegi1 i have been around and i would never step foot on any truck.i buy craftsman and craftsman only.i cdont need a fancy name to tell people how good i am.oh and as for the name the real (jap) is naiko but here in "america" as people like to call it its sold as neiko.but see you made a mistake and you claimed that you dont make mistakes.all snap off fags do.

[cesmegi1]

@robby844 Craftsman?.... What are you doing with the Big Boys-- can't get credit on the tool trucks?... So you won't buy any Snap-on at all? or Ingersoll Rand? That's Funny. I have seen some of your posts on other videos. And you claimed to have purchased from tool trucks and own IR power tools....I know, i know "they're all made by the Neiko" ..you're Funny :) How's that China mop? is that Neiko branded too? or Craftsman? I'll stick to Snap-on Thank you...

[robby844]

@cesmegi1 uh all my air tools are ir.and i never claimed i purchased form tool trucks.the guy came over and gave me a set of screwdrivers to try and they broke within 15 minutes and he took them back.boy did he talk them up.wow you pansy ass snap off are all the same.

[cesmegi1]

@robby844 This is fun, isn't it? So your air tools are Daiko, Naiko, Neiko, Neiko USA. Craftsman... Oh was that somebody else on those vids... My Bad... OOHHH I forget. what was the correct spelling again...LOL... Dude, Really???

Hey wait a minute... Your in California. Isn't Your State is Flat Broke, Shouldn't you guys be doing more to Help the U.S instead of Bashing our own companies... Really?LOL WATCH THE ENTIRE VIDEO BEFORE YOU CRITICIZE ... It's not about just crushing boxes you schmuck.

[robby844]

@cesmegi1 ummm no i only buy the US ir tools.why the fuck would you even bring up daiko and naiko? but your like every snap off man.ill just let you think you know what you know.but really if you only knew a 1/4 of what you think you know youd be dangerous.

[cesmegi1]

@robby844 How do you know it's made in the U.S? Did you tour those plants too. Is your aunt a team leader for IR???

[robby844]

@cesmegi1 no but my other uncle works for ir and has for over 30 years.and no they arent made in the us so it really doesnt matter

[cesmegi1]

@robby844 LOL

[robby844]

@cesmegi1 see how easy it was for me. my ir's are made here but not all of them are.

[cesmegi1]

@robby844 By the way... you're not to use them on 450E Backhoe loaders as Chisels... LOL Just Kidding. Bottom Line---do more research before you judge... for example: Neiko USA is only a name, not where they claim to be made... Neiko, Naiko, Daiko, whatever you call it, is not even in the same league as Snap-on.. Really ? where did you get this info from...a Cracker Jacks Box? Come on Sunshine, grow up. don't be so angry. am I wrong? Prove it to me silly man. KRL tool Boxes are Built in here.

[robby844]

@cesmegi1 sorry i forgot you were stupid.

[cesmegi1]

@robby844 google.com/finance?cid=1180269­ check out your info /here is your waterloo

[JendrusZbojnik]

@cesmegi1 yup, and if its made over seas like blue point, which is snap-on now, there still good quality like snap-on

[robby844]

@cesmegi1 twisting my words? really? you just proved you cant fucking read for shit you damn nigger.yes you have to be a nigger to not be able to read the shit i type.so yes again i prove you wrong.

[robby844]

@cesmegi1 btw hes not my friend.read the shit right.see that just proves you cant read right.

[MaDDeStHoNDa]

i own a krl722 snap on box and its the best every box

it pawnz matco and mac

[ageofpoo]

awesome video!!! proves snap on makes the best tool boxes... matco got crushed !!

[sixstringplayr5]

Ya, if I was selling a overpriced Hyundai, I'd crush a Mercedes Benz too.

[pussynip2]

ok idk many things that can stand up to a car crusher. i have a matco box and it stands up to everyday use . now show us your flawless toolbox and i bet that would crush to.... and most companys dont put it into there design of a toolbox that it has to stand up to 20,000 plus pounds of pressure on top of it. also its not safe to work in a car crusher : )

[drknockers1]

check out that tash.. a tash like that he knows what hes talking about

[jrhbull]

Yeah wheres the SnapOn Box test???

[megacaputi]

I WORK IN SNAP-ON OF BRAZIL IN THE CITY OF SANTA BARBARA WEST SP IS A GREAT COMPANY WITH CAR EQUIPMENT AND TOOLS OF LAST FUUNCIONÁRIO Ligist CELSO LOBÃO.

[DARKSCOPE001]

instead of smashing a perfectly good tool box maybe they should give it out to mechanic students in training i know, because im a aviation mechanic in traning and i spend quite a bit of my paycheck on tools and I end up buying discontinued boxes or something of a lower price. just a suggestion.

[foxdmulder]

Matco should do an ad campagin and crush a snap on box and review comparisons.

[outoffocus1]

2 things they messed up on.

1. why don't they show us how THEIR boxes stand up to a machine meant for hunks of metal much bigger than that.

2. snapon boxes aren't welded in good spots so they start to lean and turn into a rhombus kinda shape.

matco boxes actually stand up to everyday use. sure, they don't stand up to a car crusher. i guess that means the mechanic should be more careful where he leaves his box. :-)

[bigjimmy0922]

now show craftsmans and snap on in the crusher why just show matco

[ageofpoo]

because the snap on tool box would cause the car crusher to break down... the snap on is too strong!!!

[Skittles2210]

that was a funny comment. but get real it would crush 2

[ageofpoo]

NO it wouldn't !!!!!!!!!!!!! How much do you want to bet because here in Canada snap on tool boxes are the best and they last years without breaking down!!!!!!!!

and this test right here proves what happens to other tool boxes after only a few years in services ... ie: matco in this case

ALSO why would they put a snap on tool box in there and risk damaging the crusher... THINK BEFORE YOU ASK STUPID QUESTIONS YOU TARD!!!!!!

[woodzo40]

The red box at 57 sec is mine. God my ass hurts after buying it lol.

[krakatoahhh007]

I just bought my first new Snap On ratchet last week, a T72 1/4" ratchet and it jumped out of engagement and free spins the first time I tried it and it won't stay engaged. Now I have to track down the Snap On guy and tell him his new little $62.00 ratchet doesn't work.

Oh well, my Craftsman one still works fine after 18 yrs.

[CdnSpecOps]

boxes get worn out by moving them around, kinda sucks if your garage makes you use different hoist everyday or has a toolbox room, rolling on a rough floor puts alot of pressure on the welds, i've seen boxs shaped more like parallellograms than squares

[wafrederick]

The Mac,Matco incuding the Cornwell toolboxes hold up to everyday use for work.The Craftsman toolbox is another story,do not last for proffesional use due to weak spot welds

[funnydirty01]

what did we learn class? dont put your tool box in a car crusher

[chunknottz]

why didnt they do it with snap on tool cab

[riley675]

because it probly would do the same thing

[TheMuie]

there's no point in crushing the competitors product, but that's the point... i'm confused

[matcohaig]

i still dont know what youre trying to prove! show us a real world test between your box and the competition! you can even try mac and cornwell too.

[10cheatsrule10]

Lets See the Snap-on box take that.... Common.... Dot it!!!!!!

[skoalxxmint]

Well where the snap on box?

[occnyac]

Nothing like companies making each other look bad!