True, i think im ordering the case anyway lol, if a dual rad wont fit ive got a single layin around somewhere, and i dont think rivets will pose too much of a threat, thanks much for the quick response!!
@DynamicJDUB99 hahaha, well your wont regret it, i love it so far, im going to install my new PSU tomorrow and try out the cable management system and see if i can get it right, btw let me know when you get it and remove the hdd cage, ill want to see that, Good Luck
@DynamicJDUB99 you can put a dual rad on the top of the case on the outside with a set of fans on the inside but the problem is that the clearance does vary from MB to MB since some sockets are placed lower or higher than others, for example with my old 775 MB with a CM hyper 212 plus i had like half a inch on the top so no regular fans will fit but with my am3 socket same cooler i have around 2 inches, as for the HDD cage unless you break of the rivets that cage aint moving
@TheSlayerIsBack thanks man, it might be a bit before i actually get it, but if you want imma put a vid up real soon of my current rig, its damn nice, you should check it out
@TheSlayerIsBack They aren't very good quality at all. Especially when it comes to the molex and 3 pin adapters. the Molexs get pushed down and break very fast. The 3 pins seem fine. also when it came to the stock cable tie job. it looked terrible. Not sleeved or anything.
I hate the M59, I bought it a while ago and thought it'd be good quality. It's terrible. There is nothing good about the case except the black interior. Which has no room in the back for cable management. The front Bezel is cheap. The side fan contraption breaks too easily. There is no room for installation of anything but the parts, if you put an h50 in it you cant have 2 fans on the top. So you have one grill just letting dust in. The window sucks. And it's not very noise cancelling.
@KTCRITCH your just saying stuff you didnt like, i says what i like about it, the only thing i dont like is the fact that the top left fan cant be a mounted if you put it a optical drive other than that i dont see anything wrong with it, as far as noise goes, yes its not that noise canceling but i do use my headphones alot and i dont even notice the fans
Good luck with this case....I just got it too. The fans are kinda cheap....My blue one already shorted out and I bought it march 18th. I like it though. Just needs new fans. Good luck and check out mine! :D
True, i think im ordering the case anyway lol, if a dual rad wont fit ive got a single layin around somewhere, and i dont think rivets will pose too much of a threat, thanks much for the quick response!!
DynamicJDUB99 10 months ago
@DynamicJDUB99 hahaha, well your wont regret it, i love it so far, im going to install my new PSU tomorrow and try out the cable management system and see if i can get it right, btw let me know when you get it and remove the hdd cage, ill want to see that, Good Luck
TheSlayerIsBack 10 months ago
Is there room for a dual rad and i single set of fans in the top, and do you think you could remove the bottom HDD cage without alot of trouble
DynamicJDUB99 10 months ago
@DynamicJDUB99 you can put a dual rad on the top of the case on the outside with a set of fans on the inside but the problem is that the clearance does vary from MB to MB since some sockets are placed lower or higher than others, for example with my old 775 MB with a CM hyper 212 plus i had like half a inch on the top so no regular fans will fit but with my am3 socket same cooler i have around 2 inches, as for the HDD cage unless you break of the rivets that cage aint moving
TheSlayerIsBack 10 months ago
@TheSlayerIsBack thanks man, it might be a bit before i actually get it, but if you want imma put a vid up real soon of my current rig, its damn nice, you should check it out
DynamicJDUB99 10 months ago
@DynamicJDUB99 sure ill check it out
TheSlayerIsBack 10 months ago
Also the fans blow barely any air.
KTCRITCH 10 months ago
@KTCRITCH they blow air, maybe you want some turbine like fans but these are basic fans and for the price its ok
TheSlayerIsBack 10 months ago
@TheSlayerIsBack They aren't very good quality at all. Especially when it comes to the molex and 3 pin adapters. the Molexs get pushed down and break very fast. The 3 pins seem fine. also when it came to the stock cable tie job. it looked terrible. Not sleeved or anything.
KTCRITCH 10 months ago
@KTCRITCH well ill give you that one the molex are cheap and they break but only if you messing with them alot,
TheSlayerIsBack 10 months ago
@TheSlayerIsBack In general. My first plug in 2 connectors backed out.
KTCRITCH 10 months ago
@KTCRITCH well ive only had problems with the molex from the "night light"
TheSlayerIsBack 10 months ago
I hate the M59, I bought it a while ago and thought it'd be good quality. It's terrible. There is nothing good about the case except the black interior. Which has no room in the back for cable management. The front Bezel is cheap. The side fan contraption breaks too easily. There is no room for installation of anything but the parts, if you put an h50 in it you cant have 2 fans on the top. So you have one grill just letting dust in. The window sucks. And it's not very noise cancelling.
KTCRITCH 10 months ago
@KTCRITCH your just saying stuff you didnt like, i says what i like about it, the only thing i dont like is the fact that the top left fan cant be a mounted if you put it a optical drive other than that i dont see anything wrong with it, as far as noise goes, yes its not that noise canceling but i do use my headphones alot and i dont even notice the fans
TheSlayerIsBack 10 months ago
Good luck with this case....I just got it too. The fans are kinda cheap....My blue one already shorted out and I bought it march 18th. I like it though. Just needs new fans. Good luck and check out mine! :D
pinball0705 11 months ago
@pinball0705 bummer, well ive used it for about a month or two and everything still works, but thanks
TheSlayerIsBack 11 months ago