JT MOTOR.ASF

[88hosea]

build it bigger!! power your neighborhood for free!

[eloid777]

look up don smith he has done alot of work on resonace radant energy

[Pniquinga]

HELLO

* WHERE CAN I GET THE MAGNET ...?

* THE NUMBER OF TURNS FOR COILS ARE FEW ..?

* WHAT IS THE NUMBER OF WIRE ...?

* WHAT IS THE NUMBERING IN TRANSISTOR ECG

A GREETING FROM ECUADOR - SOUTH AMERICA

[iswindowsavirus]

please tell me what exactly do you have on the two leads of the led you move round in your hand? as to me it looks like just 2 diode's and a bit of red wire, thank you.

[darcchen]

Can you attach this Lidmotor to an old bicycle dynamo? These dynamos produced about 3 watts, which would be way overunity compared to the input of the 1.5V battery!

Would be very itneresting to know :s

[Lidmotor]

@darcchen ---I have one of the bicycle generators and it would work on a larger pulse motor but--- I have learned that there is no gain in trying to make electricity with electricity in a closed loop system. John Bedini has it right there. To do it the system has to open looped. He describes a wind turbine as being an example of an open loop system. If you try to run that bicycle dynamo with an electric motor it would not produce more energy than you put in.

[darcchen]

@Lidmotor : I see; sounds reasonable, although I hoped that the JT voltage spikes could maybe result in a faster motor. Thanks anyway :)

[Cloxxki]

Excellent as usual!

Might the similar diameter of the motor coils to the large exciter coil have to do with it? Forgive me when I'm asking the obvious here.

Does it not transfer any energy with the magnet spinning?

[Lidmotor]

@Cloxxki -----I really have not figured out why I am getting the effect. It might be, like you said, the difference in coil sizes. The effect will happen with or without the motor spinning.

[jackscholze]

Lidmotor, Your are rolling! Your ideas are getting better and better. I'm real curious about stringing additional coils in series with the first ones on the motor, then extracting energy from them, like a daisy chain, the idea is called the Tesla Shuttle kind of thing. With the right resonances, you can get a lot more out I think.

Aloha

[Lidmotor]

@jackscholze ---I have to read up some more on what Tesla did. It was brought to my attention that he didn't have any niffty NPN transistors or switching diodes to play with and look what he did.

[Cloxxki]

@Lidmotor

Oh, to me the coils seemed to be of similar diameter. I was going at some mass resonance frequency kind of thing. Seemed to make sence that a pulse in the one coil might work like an exciter. Your exciter tower might function as receiver.

I don't know anything, so don't take my words for truth. Just a clueless tech groupie. Keep up the great vids please!

[vik95170]

great for juste a AA!!

[GBluer]

That is impressive Lidmotor.

Great video.

[Lidmotor]

@GBluer ---Thanks. I will have to hook the scope up and see what frequency it is running at to get that SEC effect. The wave form should be interesting. Tall spikes & very close together I'm guessing.

[Anothercoilgun]

We have night vision, infra-red, and magnetic flux vision. Someone needs to make SEC vision.

[Lidmotor]

@Anothercoilgun -----Dr. Stiffler has probably already thought about it. This might find it's way into the medical field and end up like an MRI or a CAT scan.

[area46241]

That's cool Lidmotor...alittle Newman, some Slayer, touch of davro, and a generous dose of Stiffler. You make some awesome videos. Thanks for posting " it " :)

[Lidmotor]

@area46241 --- Thanks. It is a dash of this, a touch of that and all kinds of things start to happen. It is connecting the dots.

[mikepowers420]

Lid, have you set Maggie up net to it with a neo-mag ball in her mouth yet? I bet she would love it.

What about one wire transmission?

[Lidmotor]

@mikepowers420 -----I tried Maggie with this after I made the video and was amazed at how well she worked with it. What I didn't realize was that for the amps I was spending ---I was also getting torque. Maggie likes that.

[mikepowers420]

@Lidmotor you know that if you placed another two mags on the ends of an extended axle, you could have two gens. Two thin plates of aluminum between your mags would act as shielding and keep the mag-field interaction to a minimum. The gens would place some drag on the pulse motor, but not that much I don't think. You could try it with one at first and mesure the increased curent draw of the pulse motor, see if it could handle two gens.

Man, I just Dig what you are doing.

[Lidmotor]

@mikepowers420 ---Thanks Mike. The motor / generator idea is interesting---especially when it comes to pulse motors with flywheels.

[rroge5]

reversing the polarity on a coil would also work, instead of having to wind them opposite directions.

i do believe if the trigger coil was at a different stage of the rotor's rotation (just before the main coil) there would be greater torque and less power usage.

this works exactly like a bedini motor cept the coil is around the whole thing and it only triggers once a rotation.

very interesting high frequency noise in the camera. a frequency sweep

[Lidmotor]

@rroge5 --Check out TheDaftman's video. He has some very interesting comments about how and why this type of motor works.

[rroge5]

@Lidmotor which one? i can explain exactly how this works.

[Lidmotor]

@rroge5------It is called---"the Daftman Pulse Motor". He is using a standard Bedini SSG circuit instead of a Joule Thief though.