Modem Motorola 5100 Blackcat

[dreamemcee]

step 3 - connect the blackcat cable, step 4 - wtf, reconnect the blackcat cable, step 5 - throw the modem away. step 6 - learn to solder. step 7 - buy another sb5100. step 8 - solder the 10 pin header without completely destroying the jtag interface. step 9 - connect the blackcat cable.

[technoboi0]

Never take solder to the joint via the iron. Apply the iron to the joint & then the solder. Don't leave the iron on the joint for longer than necessary. NEVER rely on solder to bridge gaps as wide as that. In time they may become unreliable. Always use some wire to make connections between points - don't rely on solder to do it. You've just seen an example of how not to solder. It's a wonder the board still worked! Also there was no indication as to the purpose of all this.

Lo siento senor :-)

[tosssik]

Why illegal? It's educational purpose only.

[Xytos]

take this shit off the internet dude it's fucking illegal ass hole mother fuckers

[dreamemcee]

@Xytos your comment is as useful as his soldering.

[bertopinol]

you suck mother fucker

try something els3

when u know how to solder come back

[DemonsPride]

What Happend to the original Video of this bu TCniso with the German Song?>> for that Matter what was the name of that German song?

[seanshorty]

omg i thoght it was called "soldering" not "spread it around"

[wasonloko123]

payasoooooo!!!

[eolo3333]

he need some soldering classes 2 minutes and 10 seconds to solder just 10 pins ?'

necesita unas clases para soldar

[xxwookey]

You have to admire the self-confidence of someone that bad at soldering to put the vid online. I would just be _so_ embarassed! I guess he doesn't realise.

[grant2053]

omfg, 3/4 of the vid was the dumb ass trying to solder the damn pins! 

[completebastard]

Downrated for shitty music. Take care.

[moraleso219]

hola esta bueno tus videos pero tengo una pregunta como se yama el cable que le conectas  para comprarlo plissssssss dime

[grekodave]

@moraleso219 no ves el titulo black cat..

[avelosoi]

Jajajaja compadre, quien le enseñó a soldar????

Buena onda, gracias.

[xXdepressedPandaXx]

OMFG!! i am laughing so hard right now. the soldering job was so horrible it is quite funny.

[jennybuchan]

could u contact me. i am trying to hack a modem, i have a j tag etc but i am stuck after that thanks

[samwanable]

i guess he try to connect that stuff together!

[wilfredotour2]

can make a video on the SB5120???

[GMELECTRONICS365]

dam this guy needs a leson in soldering.

[CorollaGTSSRX]

OMG!!!!! I totally used this video when i got started!!!!! thx!!!! Dude, USB black cat is ssooooooooo much better, i'm inlove wth mine!!! you should touch up your soldering skillz ;) Thx for calling me stupid on my debrick commands....cheers

[GMELECTRONICS365]

bro sbh usbjtag is better i first bought the serial jtag slow as heel the blackca usbjtag . now im and running with sbh usb jtag my sbhjtag flashes in les than one minute i have uploaded the boot and the firmware . diffrent programs but when your familiar with the commands . its easy as pie. :)

[TheChoosen100]

lol

[XxMEVANSxX]

LoL They Should make an HD video and he really fucked up on the soldering part!

[lazzer408]

The person in the vid needs to learn how to solder.

[heroe1981]

ocupas mejorar tu tecnica de soldar porque es malisima........

[chaotic13000]

que onda con la nueva actualizacion de mega cable que haran ahora los hackers???

[MassMods]

MassModz com for premodded modems!

[crealster]

Soldering tips:

1: Use a 30 - 45 watt soldering iron

2: Use flux (Kester is best)

3: Apply solder while Heating the connector tips

4: Never forget too much heat can damage the PCB connections.

[lazzer408]

25w is MORE then enough. If you need flux you dont know how to solder or your tip temp is so hot your vaporizing the rosincore before it can do it's job. Rosin core has the flux in it which is more then enough for quality joint.

[cyberlifer]

lol noooooooooob...........

try using flux may find that you dont have to play with the solder and solder sticks like shit to fer

sorry 1 star from me m8, worst iv seen yet.

i would like to see you hard solder a wii chip without killing it.

might even upload a vid for you, just to help ;)

be honest i would not let you 10 foot near any of my electrical gear, a man with glass eyes could do better. blind folded.

you dragged out a 10sec job in to 4mins nice

[imblackanproud]

damn he sucks at soldering, but really, after i do the black cat, then what? where do i get the flashing software from?

[IPSPMAN90]

if he can solder like that I bet I would not have any problems. I have the SB5101 and I bought it from a guy for 50 bucks, he already made the mod now I now how to do it and I will do it! But i don't need to... so I keep using this one and everything should be fine.

later

[TheTarrMan]

i would love to learn how to do that stuff

[manicx195]

Dude! Really? Flux, look into it. Thanks for the info but edit your movies so you don't look like a fool soldering.

[eric23101]

worst video and soldering job EVER!!!!

[terrormasta]

rofl, learn2solder

i nearly had to puke while watching this :/

[anthonysku]

this is total blshitt! shak'n'video and soldering by idiot. don't follow this instructions!

[r3dbeard]

Man that soldering was painful to watch.

First, lose the butane iron. That might be great for working on a few wires on your car but it has no place near a printed circuit board. Second, do one pin at a time. Do not touch more than one pin at a time and give some time for the board to cool down between pins. You can see the board turning dark from being burnt by too much heat. If the solder clumps up, then you overheated it or didn't use any flux/rosin to help the metal flow.

[tefaltarock]

te voy a sapear logo xD