@rotadict i think its was either driver error or a problem in the suspension setup. there are v8 swaps that are controllable. like Daijiro Yoshihara's V8 S13.
I know what an inertia drift is (or a scandanavian flick if you want to call it that)
If you nocticed he turned slightly left then quickly back right which would have initiated a drift through a right turn. Obviously there was no right to so he is an idiot.
absalute gutted ffor you m8 and all those who say this guy is rubbish atleast he got to formula drift and pcxmac11 this takes skill nascar dousnt i bet most of the people who commented saying they could do better where are ya i dont see you on tv in formula drift
@ode4951 I wasn't being serious dude. Obviously, the guy turned to get the car loose. He may have gotten nervous and cranked the wheel too much, which caused him to hit the wall.
@derekd234 actually he was doing that drift with a feint(swing move)
Keiichi Feint Drift
youtube.com/watch?v=_AIk2kiaFMg
you slightly turn opposite way where the turn goes and then rapidly steer the car at the other way so you have a drift without the e-brake but he obviously ''turned it behind the fence'' so buuuu thumbs down for me.
thats what you get when u get the ls1 with too much torque. it swings the rx7 the opposite direction. stupid people who built the RX7. i would've put a 2jz-gte in it
@trezza181 hahaha i have a typo by hitting a second "r" thats your bigest come back to not knowing a darn thing about that car or the LSX motor swap it has in it..... ur right i am ...the dumbbbbbbb onnnneee there.... care to correct those extras aslo ?
@trezza181 well the term ruin the rx7 come off bias...the LSX block is a very usable and relable engine thats why they used it..the rotary engines do well in motorsports no doubt but ithink its up to the individual driver and owner to descide the best options..and for they it was a GM LSX motor
Because I have 2 motors for my 1993 RX-7 and both are blown, cost to rebuild about 1,500 just for kit. Any other work (3mm apex seal conversion, race porting, new turbos, upgrade fuel injectors, computer upgrade, all exterior motor components upgrade, larger intercooler, upgrade to stronger transmission, driveline, rearend to handle all the horsepower, now your looking at anywhere around 6,000.00 to 12,000.00 to rework. These cars are beutiful, but they are money pits. But I won't sell mine!
rx7 are meant for one thing really! Theyre meant for only rotory engine their the only one will ever come with a rotary! If you want muscle car might as well get one dont waste time n money putting it into a fucking rx7
Have seen that happen countless times with v8 swapped FCs. Wrong chassis for that engine when it comes to anything other than straight-line setups.
People usually do it because they can get a FC shell very cheap and it is a lot easier (and cheaper) for them to work on piston engines in the US over rotary.
Compitition wise, you are not going to get far with a v8 engine FC or even a rotary. It's good to start with but you are going to have to upgrade to a FD or something else.
Holy Fuck!! That sucks dick big time. Similar thing happened to me in my 180sx. Initiated the drift feint style and it just wouldn't transfer into the turn. About same damage as that RX-7
Charles Ng is no joke. I drifted with him in the Irwindale Pro Am Qualifier and he won the event. He is a very cool guy to talk to. Reviewing the video this is the exact same thing that happened to V Jr's Mustang. He initiated the feint entry and the car did not set to the transition for Handbrake initiation. He had the correct angle, and the car did stop rotating for a split second then it started rotating again, and he pulled the H-Brake to try to save it.
@davidzzz94 oh god here we go again about they arent reliable and shit dude if you keep the oil changed and keep it road worthy and keep it cooled off its a good car and fast also and drifting no thats dumb ne ways..
@catfisher10100 RX-7s are light, but the rotary doesnt make for a mountain of power. some people would prefer the instant torque and high power figures of a V8 over the somewhat lower torque and turbo lag (although marginal) of a two-rotor turbo motor.
light chassis + V8 power and response = drift monster
@catfisher10100 Well, that right there is a FINE example of taking out a rotory and putting something else in.. completely fucked up the balance of the car.
Gay
zeenjapan 2 weeks ago
More stupid americans who think they can drift.
merricko56 4 weeks ago
Yeah what you get when you lock on "outside turn"
vkinn123 1 month ago
mi rx7 dont have traction bar and i dont have any problems i have 400-450 hp whitout problems
rotadict 1 month ago
that problem is heavy v8 not control
rotadict 3 months ago 3
@rotadict i think its was either driver error or a problem in the suspension setup. there are v8 swaps that are controllable. like Daijiro Yoshihara's V8 S13.
imjustwonderful 1 month ago
@rotadict lol actually not that much of a weight diffrence than you might think.
if i remember right its only about 100-150 Lbs diffrence:D
siggikalli 1 month ago
that was... kinda pathetic... :(
monstersupra808 3 months ago
shit man ! i feel bad for him o_0
MUDSTERmachine 4 months ago
The rotary gods were angry
aschulte92 5 months ago 7
the driver of the mazda rx7 must love nascar
russiancommy 5 months ago
Comment removed
russiancommy 5 months ago
Comment removed
DesktopSportsFan 5 months ago
Comment removed
russiancommy 5 months ago
oh shit
SuperTannerP 6 months ago
Why isnt the SCion stopping? obviously he won the run? Even on the way back? :s
TheDominiqueG 6 months ago
@TheDominiqueG If you don't finish you don't win.
RR1Joel 4 months ago
@chroma 2021
I know what an inertia drift is (or a scandanavian flick if you want to call it that)
If you nocticed he turned slightly left then quickly back right which would have initiated a drift through a right turn. Obviously there was no right to so he is an idiot.
Ricer lol ur funny.
iareme05 6 months ago
dag namit I turned the wrong way again
ltlocus 6 months ago
@ltlocus XD thats funny shit
SuperTannerP 6 months ago
LOL, what an IDIOT! he thought it was a right hand turn when obviously it was not!
iareme05 7 months ago
looks worse than it is cos the kits come off really easy
teambrucewillis 7 months ago
Haha FAIL!
laughsatposers 7 months ago
i think hes hand brake got stucked or something
importdriftable 8 months ago
I don't get how that happened... too much grip?
lycante 8 months ago
@lycante
looks to me like too much hand brake
bmxguy08 8 months ago
How did that even happen>??
LEFTxFOOTxFORWARD 8 months ago
absalute gutted ffor you m8 and all those who say this guy is rubbish atleast he got to formula drift and pcxmac11 this takes skill nascar dousnt i bet most of the people who commented saying they could do better where are ya i dont see you on tv in formula drift
bigja1995 8 months ago
putting 2 different rims with different colors makes the car go faster
Armen0500 8 months ago
@Armen0500
They could have been wider tires on the back, but yeah this guy just failed.
cowsys1 7 months ago
BAHAHA
450teamsuzuki 9 months ago
@pcxmac11 do u are retard?
suzuki834 9 months ago
I see the problem the back wheel is a different color, they don't match his suit
xtarletanx 9 months ago
I see the problem the back wheel is a different color
xtarletanx 9 months ago
Co on zrobił... xD
3Cezar 9 months ago
Hahaha what a noob!
KeepsPassinMeBy 9 months ago
he fucked gushi up man! threw off his concentration!
momo92ishere 9 months ago
What the fuck happend please explain?
r2zibit 9 months ago
haha i like how nobody clapped when he got out of his car lmfao
aznfood253 10 months ago
wtf!?!? is that a v8 in a rx-7?!?! NOoooo!!!!
gattler 10 months ago
Damn I know that hurt his Pride......
KIMBOSLICE66666 10 months ago
i drift better then him and im only 14... YIPPEEE im better then a pro!!!!!!
machinimareflex 10 months ago
@machinimareflex fuck off
maiiko2912 10 months ago
This makes no sense. Was the car magnetized to the wall or something?
derekd234 10 months ago
@derekd234 it makes perfect sense blonde he just lost control
ode4951 10 months ago
@ode4951 I wasn't being serious dude. Obviously, the guy turned to get the car loose. He may have gotten nervous and cranked the wheel too much, which caused him to hit the wall.
derekd234 10 months ago
@derekd234 actually he was doing that drift with a feint(swing move)
Keiichi Feint Drift
youtube.com/watch?v=_AIk2kiaFMg
you slightly turn opposite way where the turn goes and then rapidly steer the car at the other way so you have a drift without the e-brake but he obviously ''turned it behind the fence'' so buuuu thumbs down for me.
jaguar123987x 9 months ago 2
How to fail at drifting in 10 seconds starring a mazda rx-7
Slevin7792 11 months ago
That scion looks fucking SICK with that body kit and spoiler.
180hotshot 1 year ago
I would have been so pissed if I had wrecked that car on the start, you would have not forgotten what I would have done man..
NeonLightsAreFun 1 year ago
Oh...OHHHHHHH!! That says it all.
killersushi99 1 year ago
scion motor sounds nasty
KintoJin 1 year ago
wow lol failllllllllll
KLONIME1001 1 year ago
le pasa por estupido jajaja por ponerle un V8 jajaj
Daddy0089 1 year ago
nisiquiera era rx7 pendejos
luischanty1 1 year ago
@luischanty1 rx7 FC pendejo !!!!!
lesgus72 1 year ago
it's funny how everybody is going with the corvette v8 :)
pugaoffilth 1 year ago
what the hell is this? shitty ass retard drifting? he turned into the wall wtffffff
and then the other guy drifts onto the grass??
somebody needs to go back to practicing in an empty lot for real..
tomboneschevy 1 year ago
That guy didn't deserve the win
burnout616 1 year ago
HAHAHA!!! FAIL!
Adkins41190 1 year ago
I don't think he knew the corner was in the other direction.
driftan00b 1 year ago
i saw this happen it was fucking ridiculous in person
sktrsam2 1 year ago
car is beast! it still lives too saw that shit at willow in october
brandonpejsa 1 year ago
and thats why you dont put a heavy ass V8 in a RX7 , it throws the 50/50 balance out the window into the nearest wall.
the13joker 1 year ago
thats what you get when u get the ls1 with too much torque. it swings the rx7 the opposite direction. stupid people who built the RX7. i would've put a 2jz-gte in it
JrmE94 1 year ago
That FC really wanted that wall
TheRogueSS 1 year ago
That FC really wanted that wall
TheRogueSS 1 year ago
The japanese stick with the stock engines, the americans put v8's in everything and the english put 2jz's in etherything
huwbertoo 1 year ago
Tc own3d
Rockybeaglelover 1 year ago
RX-7s are better than any other cars, pistons are gay
trezza181 1 year ago
@trezza181
if someone offered you an r34 would you really say no?
lagundafire 1 year ago
@lagundafire nope...id trade that bitch in ahahaha
YellowCamaro85 1 year ago
@trezza181 hahah thats why that rx-7 has a corvette pushrod v8 in it hahahaha u mororn
YellowCamaro85 1 year ago
@YellowCamaro85 at least i can spell moron
trezza181 1 year ago
@trezza181 hahaha i have a typo by hitting a second "r" thats your bigest come back to not knowing a darn thing about that car or the LSX motor swap it has in it..... ur right i am ...the dumbbbbbbb onnnneee there.... care to correct those extras aslo ?
YellowCamaro85 1 year ago
@YellowCamaro85 Whatever. My initial point is, why did they ruin the mazda by putting a V8 engine in it.
trezza181 1 year ago
@trezza181 well the term ruin the rx7 come off bias...the LSX block is a very usable and relable engine thats why they used it..the rotary engines do well in motorsports no doubt but ithink its up to the individual driver and owner to descide the best options..and for they it was a GM LSX motor
YellowCamaro85 1 year ago
really? really Ken Gushi? Really?
skaterboii1000 1 year ago
i think he switched to a v8 for more torque around small turns
JD97897 1 year ago
thats what u get for putting a v8 in a rx7 fail
TheRotaryspeed 1 year ago
he was fine, just to embarrassed to get out of the car until his buddy got there
TheCatIsOnFire 1 year ago
anyone else notice that he crashed in front of a mazda sign?
ryceboi443 1 year ago 2
@ryceboi443 hahahahaahahh
yomonstruo 1 year ago
@ryceboi443 lmao i didnt notice until i read the post
CRAZYXBLACKXMAN 1 year ago
Well thats embarresing
TheFerrarichannel 1 year ago
wtf...is that drifting?its fucking.
jijinamalia 1 year ago
That'll teach him to take a rotary out of a rotary.
dreadly101 1 year ago 2
@dreadly101
Damn Skippy only rotary belongs in a fc or fd
MrSwodahs 1 year ago
This has been flagged as spam show
@dreadly101
Damn Skippy only rotary belongs in a fc or fd.
MrSwodahs 1 year ago
Thats what happens when you take a Rotary out of an rx7
shocker2103 1 year ago 96
@shocker2103 u got damn right it does fuck this car i hated it when essa built it and i still hate it..it aint a motor if it aint a rotor
rotarydriftdreams 1 year ago 2
@shocker2103 You watch this car with the real driver in it? The guy who actually made and created this car? All driver not car.
evoknight 1 year ago
@shocker2103 Fully!
NiveusLuxLucis 9 months ago
just drift the truck
lifesgo0d 1 year ago 23
@lifesgo0d he almost did but thought of it and...nah
yomonstruo 1 year ago
haha suker......wow he feel in love with the wall.....
89shadowable 1 year ago
Thats what happens when you try to show off. Next time, just drive through the corner normal like and you'll be OK.
Boomer8404 1 year ago
that rex really wants that v8 outta there. it wants its rotary back
JAMinguitardude1 1 year ago
Borat - Niiiice,
CoolFille100 1 year ago
what a suck drifters
ganesh8586 1 year ago
lol lol! fail!
Gummby69 1 year ago
Drifting is like Wrestling - not a sport. What an insult to a fabulous road race track.
dinglecooper 1 year ago
@dinglecooper LOL if its not a sport lets see you go out and drift like the pros :)
iamemerican 1 year ago
Comment removed
rx7dren 1 year ago
Comment removed
rx7dren 1 year ago
Go Ken Gushi !!! Scion Rocks !!!
Justin1167 1 year ago
Because I have 2 motors for my 1993 RX-7 and both are blown, cost to rebuild about 1,500 just for kit. Any other work (3mm apex seal conversion, race porting, new turbos, upgrade fuel injectors, computer upgrade, all exterior motor components upgrade, larger intercooler, upgrade to stronger transmission, driveline, rearend to handle all the horsepower, now your looking at anywhere around 6,000.00 to 12,000.00 to rework. These cars are beutiful, but they are money pits. But I won't sell mine!
rodbustercalif 1 year ago
paradriftlympics...
infinitebombs 1 year ago
would have been funny if the tow truck drifted lol
migi92 1 year ago
steering on the right side got broken. bad luck
laslayer130688 1 year ago
homo as soon as i seen the engine at the start...
Tj1056 1 year ago
rx7 are meant for one thing really! Theyre meant for only rotory engine their the only one will ever come with a rotary! If you want muscle car might as well get one dont waste time n money putting it into a fucking rx7
braceo624 1 year ago
rx7 fail
dudwithavx 1 year ago
thats why you dont put a LS1 in a fc3s rx7 lol
tanabe4 1 year ago
Um...the corner goes the other way dude...
Dunnybrusher 1 year ago
I think he can use the, my steering wheel locked up excuse.
ACEharuga 1 year ago
that is embarrassing
Maniakq1 1 year ago
scion tc?? was that converted to RWD??
XBTechno 1 year ago
@XBTechno You think? LOL....
rhythmnsmoke 1 year ago
@rhythmnsmoke lmao...that guy is pretty smart
Maniakq1 1 year ago
@Maniakq1 LOL...
rhythmnsmoke 1 year ago
@XBTechno with a TRD nascar motor.
EZ30Loyale 1 year ago
@EZ30Loyale Nope, that's Ken Gushi's ride. it's got a turbo'd 4-cyl. Tanner Foust has the V8 tC.
musewolfman 1 year ago
the guy waves to the crowd three times before he got in the truck and no one clapped or anything.
AdrGrafx 1 year ago
Comment removed
AdrGrafx 1 year ago
hahahahah idiot!
mcoberry 1 year ago
here r some options
a) he wanted to hit the wall
b) he sucks ass
c) road atlanta isnt the place to drift
MrSpeed427 1 year ago
Wow he threw his rear quarter panel into the wall at long beach...then he does this .... almost feel bad for the guy
treken2t87 1 year ago
He needs to learn his lefts from his rights....jesus christ STRAIGHT into the wall the first turn lol
nuclearthreat545 1 year ago
towtruck drift ftw !!!!! :)
jdoggydog567 1 year ago
Is it just me or does any1 else hear a guy crying at 4:03-4:08???
JrShadowclone 1 year ago
That tow truck is on point lol
Morphd 1 year ago
ya just hand over your sponsers right there
footballstar227 1 year ago
fuck, i was there
lukassnakeman 1 year ago
#Lol at the need for speed sight on the right
mmAiElWhNwLwioLhNila 1 year ago
the clipping point is on the other side of the road...damn RHD
V8 RX7s ftw in this case...FTL
skaterfromvt 1 year ago
Now thats what happens when you put a v8 in a rx7, should have kept it a Rotary!
sti4lifer 1 year ago
One of my old neighbors put a v6 in an rx7 and It became way faster and easier to work on
cameronludlum 1 year ago
0:56 (theres no turn there) lol
BigLance2394 1 year ago
i've once saw an R33 Skyline with an Chevy V8, totally F'ed up In my opinion, the engine is one of the unique selling points by such an car... :-S
CARambaJDM 1 year ago
that was only the second set, the first set had an oil leak.
petree555 1 year ago
Have seen that happen countless times with v8 swapped FCs. Wrong chassis for that engine when it comes to anything other than straight-line setups.
People usually do it because they can get a FC shell very cheap and it is a lot easier (and cheaper) for them to work on piston engines in the US over rotary.
Compitition wise, you are not going to get far with a v8 engine FC or even a rotary. It's good to start with but you are going to have to upgrade to a FD or something else.
FCDRIFTER 1 year ago
ten caliss criss de v8 a marde
14supra14 1 year ago
damn just.. just damn.
rccrazer 1 year ago
thats wat happens wen u replace a 13bt with a v8... shit weight shifting. way to fkn heavy
Audi2000t 1 year ago
what a shame lolz
tomux7 1 year ago
i like how he stops right in front of the mazda sign
ronaldkamphuis2 1 year ago
Dude, that would just blow. I wouldn't be waving to the croud if something like that happened to me again.
BrandanafromMT 1 year ago
poor guy car didnt break into the corner ... that sucks
Perazzi11 1 year ago
he wanted to that he wanted to add the climax it was all part of the plan XD
LITTILDUFFLEBAGBOY 1 year ago
lol dude in the tc was like "well that was anti-climatic" xD
shaggyz6 1 year ago
Why the fuck did the rear wheels lock up?
J4AProductions 1 year ago
poor RX-7
Tunerboy8732 1 year ago
something went wrong !!
sloan2007 1 year ago
i was walking out to the fence to meet someone and saw this happen which was funny cause i hate mazdas
KingCobraOutlaw 1 year ago
too much torque thats why it crashed hahahha.......I am sadden.
RotaryKnight 1 year ago
Holy Fuck!! That sucks dick big time. Similar thing happened to me in my 180sx. Initiated the drift feint style and it just wouldn't transfer into the turn. About same damage as that RX-7
MysteryDrifter69 1 year ago
Charles Ng is no joke. I drifted with him in the Irwindale Pro Am Qualifier and he won the event. He is a very cool guy to talk to. Reviewing the video this is the exact same thing that happened to V Jr's Mustang. He initiated the feint entry and the car did not set to the transition for Handbrake initiation. He had the correct angle, and the car did stop rotating for a split second then it started rotating again, and he pulled the H-Brake to try to save it.
BYoungDrifting 1 year ago
dammm u kengushi watf was that dissgrace on japan :/
IRAQY2000 1 year ago
lol! Punished for swapping to a v8! Thanks for the upload :D
socamoto 1 year ago
They both suck?
AASChao 1 year ago
looks like he decided to drift into the wall.
pilotdapunk 1 year ago 25
@pilotdapunk he was attempting to do what is called an inertia drift.
Rx7even 1 year ago
What happend???
libinls 1 year ago
why do ppl take the rotary out of an rx7.... i mean wtf.
catfisher10100 1 year ago 31
@catfisher10100 they dont last as long as a regular piston engine
NismoPWNS 1 year ago
@catfisher10100 cuss that power of the v8 in a rx7 is the shit
IRAQY2000 1 year ago
@IRAQY2000 who cares the point of a rx7 is the heart of the beast the fucking rotary engine bro
catfisher10100 1 year ago 2
@catfisher10100 cus they arent really very well made? for example they over heat very easily, and for drifting... thats no good
davidzzz94 1 year ago
@davidzzz94 oh god here we go again about they arent reliable and shit dude if you keep the oil changed and keep it road worthy and keep it cooled off its a good car and fast also and drifting no thats dumb ne ways..
catfisher10100 1 year ago
@catfisher10100 dude just shut up, u cant keep a rotary cool, and its not a performance engine either
davidzzz94 1 year ago
@catfisher10100 RX-7s are light, but the rotary doesnt make for a mountain of power. some people would prefer the instant torque and high power figures of a V8 over the somewhat lower torque and turbo lag (although marginal) of a two-rotor turbo motor.
light chassis + V8 power and response = drift monster
DRFTmonkeh 1 year ago
@catfisher10100 bcuz its BRATATATATATATAT.....BOOM!!!!! oh shit! omg not again!
yuds16 1 year ago
@catfisher10100 agreed dude they are in my opinion a much better drifting engine.
rccrazer 1 year ago
@catfisher10100 better reliability and low-end torque with a v8 i guess
880316RR 1 year ago
@catfisher10100 Well, that right there is a FINE example of taking out a rotory and putting something else in.. completely fucked up the balance of the car.
HCNguyen86 1 year ago