Keltec is by FAR the best quality for the money. Best ergonomics by far. There basically selling weapons with glock like reliability for half the price. Check them out if u haven't already, they (from expirience) have the best customer service.
Go to hell Kel tec, if i wanted to be teased by something i can't have, I'd go to a strip club. Kel-Tec are the pole dancers of gun mfg, they tease you with eye candy then wont give out when you decide to buy /snatches his buck back from kel-tecs g-string
I am gonna fill my house up with Kel-Tec firearms....I love em ;) I may have a shiny new KSG at my LS tomorrow if they come in, cant wait. Sub 2000 will be next.
@sirtom68 your all over his channel? haha you criticized me 4 saying I was buying this weaponI? WTF Dude 4gods sake! ur board and confused! The Ksg will b my newest bad ass shot gun with 7+7 + 1 ready go the MVF-515 ordered for the bottom rail of my new jewel funny you asked me a few hours ago if I was getting this jewel sense it was in a video game and no I love nice shit & firearms or guns..lol any ways enjoy all of ur kel-tech stuff my safe will only have from them the ksg and 308 Rfb :) !!
@sirtom68 well you wrote me this on his other vid (why would you want that uglt thing cause it was in a video game?) and this is where it started from! you criticizing me for buying one .. After i complemented his video and said my ksg its on its way in the mail!!
yet you wrote on his I am gonna fill my house up with Kel-Tec firearms....I love em ;) I may have a shiny new KSG at my LS tomorrow if they come in, cant wait. Sub 2000 will be next. sirtom68 4 days ago DUDE UR FULL OF IT!
@sirtom68 BTW kel tech is cheap shit but the only 2 kel techs' in my safe are Ksg 12g and .308 Rfb the shot gun can be found from 1200 and up the Rfb 1600 and up! sub 2000 junk pistols junk so fill your house with junk and leave me alone!
I LOVE so many of their products, and HATE that they cant provide them when I'm ready to pay my money down
There ALWAYS seems to be a production issue with anything they sell, so as a result I have a lot of keltec competition items. because I WON'T WAIT
if you don't provide me with your product, your competition WILL provide me with theirs. get your production poop in a group KelTec and perhaps I'll be "privileged" enough to send some money your way.
I just recently subscribed to your videos........they're seriously awesome man! The only bad thing is they make me want to take my credit card to every gun store and keep buying more guns! haha
kel-tec reliability is a question in my mind! I've seen the pmr, the ksg and some other guns from keltec that just don't work as good as other products. I'm personally not going to spend any money on a keltec that hangs up evry other shot.
@13mrcrask I own several Keltec handguns. After a decent break in period, and with minimal maintenance, these are just as reliable as anything I've ever used. I pull the trigger, it goes bang and reloads. Every time.
He said whatever to Ruger question and I own a Ruger and one Kel Tec but at least the Ruger weapons seem to really be able to be obtained. I wanted 3 of the Kel Tec weapons and or appears about 75% of them you cannot find. Ong
Gotta say it. These reviews are very influential in the process of narrowing the field in making a final decision on gun purchases. Nuttin, the hat's off to ya. You're providing a very good public service, sir. Many thanks!
i would love it if they made a steel frame gun of some sort. if keltec made a 1911 that would get some people in their pockets right away. something in 5.7 would be awesome too
hey nutn, or veri, someone!!! i was flipping through the sept. 2011 issue of guns&weapons and guess what i saw??? a savage add for the model 110 b.a.
you know what it said? it said, and i qoute
"we call it the B.A. even though it`s the farthest thing from `liberal arts` imaginable. However, if you use the creative side of your brain, it won`t take you long to figure out what B.A. stands for"
sounds kinda similar to your comment in the video, huh? they should pay you for that.
@mdredheadguy1979 Sub 2000, buddy... they take Glock, S&W, Sig Sauer and Beretta mags, and they come in 9mm & .40 S&W. I have a Sig .40... I put a quadrail and an Aimpoint T-2 red dot on it and it rocks! Plus they fold in half (with stock sights). Check them out on our website. And stay tuned for a TNP review of his sub 2000.
@chadderick71 I didn't know that! I've been looking around for a handgun/carbine combo that uses the same ammo AND same mags for a few years now despite other people telling me how stupid the idea is. I live in Comie-Maryland where I have to travel out of state to buy and own a magazine that holds more than 20 rounds. So I thought that if I could have a handgun/carbine (like your PMR and RMR) that would make it easier.
@mdredheadguy1979 The KSG is priority #1 at the moment... HOWEVER, Tobi is also working on the RMR-30 and getting it ready for production. We hope to be producing parts for it after the holidays, so we're looking at early 2012.
I initially did not want the KSG when it first came out. Keltec has addressed the Trigger Control, added cut outs so you can see how much ammo you have in each tube and used Nutn's input on where to put the single point sling. I would sell 2 of my shotguns and get this one and I like the OD Green over the Desert Tan. :)
@corneredfox class III firearms technically don't even exist in America. It's just a designation us civilians created. Now that I think about it, you're right SBRs aren't class three, they're class two. Along with silencers, AOWs, and SBSs.
@MrBigBearBrown Short Barreled Rifles (SBRs) and Short Barreled Shotguns (SBSs) are not Class III weapons, they are NFA weapons. You can obtain them legally without requiring an Federal Firearms License (FFL) and Class III Special Occupational Taxpayer (SOT) license. There is a lot of paperwork involved, and a one-time $200 tax per item, but that's it. Automatic weapons manufactured pre-198(6?) also are NFA weapons, while those manufactured after are Class III weapons.
@blaziankhmer Can't beat a 30 round standard size magazine, however the PMR has had its fair share of problems, with a few people reporting it firing out of breech and destroying the weapon and potentially harming the user. Kel-Tec said they're going to upgrade the strength of their slide to prevent harmful shrapnel, but last I heard they were blaming the ammunition for it firing out of breech. Me personally, I would wait a little bit in case more issues arise.
@corneredfox oh thanks for telling me this, i came very close to ordering one since i am attracted to the 30 round wmr. shooting a 9mm and .223 gets expensive. that's why my 10/22 is still my favorite because i don't feel guilty shooting 500 rounds a session. well thanks for the insight, i guess i'll wait, hopefully ruger copies the design and make it better lol
@blaziankhmer No problem, I suggest keeping updated on it though, constantly look up reviews and whatnot. Kel-Tec themselves said the idea of pieces of the gun becoming lethal shrapnel was too dangerous and began improving the gun's integrity immediately. Not sure if it affects you, but they used to have a disclaimer on their site saying to not use ammo from the Philippines, as well as a list of recommended ammo (though I can't seem to find it at the moment).
RE:RMR: I've seen/heard a lot of talk about how under powered the .22 mag is. Those people don't know jack! If you can hit where you're aiming, you can drop the biggest toughest guy in the world with one round of .22 short! Besides all tactical situations don't involve turning the bad guys to pudding. Sometimes you need to take prisoners and you can put .22 mag through a shoulder or knee without taking off an arm or leg. 5.5 & 7.62 not so easy to stop the blood loss.
TU LIS CE MESSAGE (t'es mal)!! Je sais pas si je doit le croire mais je préfére ne pas prendre de risque... Dsl
1945,une jeune fille nommée lata kulu vint en Amerique dans un bateau gris venu d' Afrique. Un homme etrange la tua en gravant le mot "LATUALATUKA" dans son dos. Maintenant si tu as lu ce message elle viendras pendant une pleine lune dans ta maison et volera ton ame a moins que tu ne suives ces instructions.
1.Reecris ce message en commentaires dans trois autres videos
I am sorry for the question, but I am new in the shotguns world, I like this one very very much, but can you use in this one the non lethal gauges, or the non lethal gauges are shooted form a especial shot gun? you think the pumping shotguns are better than the atomatic, and why?
This is (by far) the best firearms review on YouTube... Period. Because of your efforts sir, I am entirely sold on the PMR, RMR AND the KSG. I have only one gripe with you though. When my wife leaves me for buying all these guns...I fully intend to blame you... And Kel Tec. Keep up the great work brother!
I have to know, though this isn't really the place to ask, but...
Any chance the KSG will load the Aguila Mini-Slugs? They hit about like a .45 ACP and would be great to have that option with 00 buck at the flip of a lever. :o)
@AaronAlso Those hit way harder than a .45acp. Closer to a .454 Casull, though with less penetration due to diameter and construction. But its a ~380gr slug at 1250fps so its a lot more like the .50AE than anything, though with larger diameter.
@AaronAlso It functions with the 2 & 1/4 mini shells... but anything smaller won't cycle all that well. The 2 & 1/4 shells will give you 8 shells per tube ;)
I just want to say something nothing against keltec seriously I want one of those shotty's bad my preferred long gun is a shotty and those looked sweet but im hopeing keltec won't pull the same crap they pulled with the Pmr30 Like i said nothing against keltec they make sweet weapons but when the pmr30 became an issue of obtaining they lost a little respect from me is all.
Still love there stuff just don't like getting my hopes worked
I like the overall design, but I would opt for the Saiga. My main reason is it's not a semi auto.. Why? Is it because they wanted to hit the California/Canada market? I don't get it. That shotgun would be amazing if you had the option like on the Franchi spas 12 to switch between semi and pump for those that were concerned with "ammo management" .
I gotta commend them on the design and the round capacity with no magazine, but make it a semi auto and we will talk. Saiga wins this round!
Kel-Tec has been inpresing me and many of my fellow shooters. And having that Florida flag dont hurt. And I injoyed getting to fire alot of their new firearms. Now I'll be shamful, I'm always open to test fire your firearms and give a opinion & writeup from a daily consumer shooter.
Just an FYI on that optic, it's a Primary Arms Micro. I've got two. They're absolutely fantastic. You should totally do a review on them, you'll like em.
I emailed kel tec about the rmr 30...they said it won't be released until late this year and won't see mass production until early next year. That sucks!
I rely hope kel tec will listen to nutnfancy and look at the views on this. I am sold on one but if it had the mods discussed in this video it would be prime!
longer barrel and mag tubes please more capacity is never a bad thing and that RMR is sweet! great survival gun. kinda looks like a refined Feather USA Rifle
Within the first few weeks of owning a P-32 I ran 500rds of .32 auto in a variety of FMJ & HP with zero failures. This last summer after returning from my Army reserve AT I discovered that my wife had unknowingly set several heavy ammo cans on top of the P-32 in one of our safes. This warped the slide to the point where I was unable to put the slide back on the frame after removing it. Kel-Tec fixed it at no cost to me & in the process turned it into a 2nd Gen P-32. Kel-Tec rocks.
its funny nitnfancy taks about that keltec`s stuff got copied by ruger. the guy from keltec doesnt complain about it, because this "new" shotgun looks just like never produced neostad 2000. it looks like 90% got copied from the neostad. all the compinies use ideas from other companies and assemble it a litle different. it happened sooo many times.
P.S. No criticism here for nutnfancy he's doing a great job reviewing stuff. I've gone out and bought a lot of survival items based on his recommendations. I'd rather see it in the use of someone who's needed it in the field, then in a catalog.
To that end the point I'm trying to make is that all this plastic and inferior quality does not add up to a good defensive, fun, or investment firearm. Go find a used .38, .357, .44 or the like and spend about 350 to 400 and you will have something that will not cause you any trouble while you own it, that you can hand down to your great grandchildren, and that you can enjoy every weekend for the rest of your life if you should so choose. It will work every time its needed to defend your home
@millersayshi How do you qualify or quantify BEST? My comments refer to historical RESALE values of weapons used for both ENJOYMENT and INVESTMENT. Glocks have flooded the market and there is very little pressure pushing the prices up of these firearms above their historic levels. The .38's, .357's, and .44's I purchased in the 80's and 90's are retailing USED in firearms stores for about 3 times what I paid for them now. And some of them you can't even find in stores.
You can buy a very good shotgun for 125 to 175 at a pawn shop with significantly better quality then this.
I watched at the range one day two weekend shooters with Glocks both of which had the magazine retention device snap and fall out of the weapon and discharge the magazine onto the ground, thus creating a SINGLE round weapon. How is that going to be helpful if you are using it for defense? You might as well carry a derringer. To that end the point I'm trying to make is that all this ..
It would be at least 500 to 700 dollars in todays market (even more if you purchased the rarer coveted designs) and you could hand it down to your grandchildren.
Now they turn out plastic injection molded parts and snap them together with people who simply feed cheap parts into machines. They hardly test these weapons, nor design them to last through 1,000 of rounds or years of use. And for that they want to charge 880 dollars? You can buy a very good shotgun for 125 to 175 at a pawn shop..
Remember when a Firearm was built as well as a sewing machine and a typewriter? That mean all high strength steels which were quenched to create the best hardness, turned out by hand and then carefully assembled and tuned by a master gunsmith in the factory? Back then a tank of gasoline cost 6 to 8 dollars and an extremely well built Smith and Wesson piston cost about 125 to 175. That pistol will last 200 to 500 years if you look after it and fire 2000 rounds without a jam. It would be.....
I like the Kel-Tec RFB because we civilians are not allowed full auto. If we cannot fire several small 5.56 or .223 bullets, we should fire one 7.62 or .308 bullet. The RFB is only about twice the size of a big .45 handgun but is much more effective against bad guys wearing body armor. Only the heaviest chest plate armor will stop these rounds. If your bad guy is over a100 meters away this weapon will keep him there, even if you can't hit him.
Will the shotgun take shells longer than 2 3/4? +1 on a little longer barrel option and some sort of choke device. Love the RMR 30 22mag too. Would be killer if it could be made to also shoot 22lr, or come with a kit to adapt for 22lr use. Speaking of not keeping up, I still can't find a SU-16C in Arizona :(
NOOO!!! You went right by the PLR 16 without any comments! I've been dying to know what your take on them. Can't wait for the Kel-Tec factory tour vid!
I know I mentioned this in another video, but I think a review on the Kel Tec Sub2000 would be awesome! I hate making a buy without hearing Nutn's say!
@mrpibb008 What are your questions about the Sub2000s? I'll tell you my absolute honest opinion about them. I have the .40cal... I built it myself, so it's pretty awesome, but the stock Sub2000s are ok out of the box. For the price you can't beat them. There are quite a few modifications I made to mine and that's good thing to point out about them... you have options... ways to make them meet your shooting requirements for a low cost. You can also take a Sub2000 to any range.
Nutn thanks for the vid, i have one question i understand you like the pf9 but you also own the Kahr Pm9, yet you are always carrying the keltec pf9 why would you carry the keltec instead of the kahr? the keltec may be a fine weapon but the kahr is far superior
A BIG RESOUNDING THANK YOU TO CHAD AT KEL-TEC FOR ACTUALLY COMING AND ANSWERING ALL THESE QUESTIONS!!!! That really shows those out there who havent had the PLEASURE of dealing with your AWESOME, truly AWESOME customer service an example of how you operate, THANK YOU FOR ALL YOUR INNOVATION!!! And for really putting the pride of ownership, and pride that 'Made in the U.S.A.' means when its a Kel-Tec! I might have 'upped' my capacity for CCW w/the XD-SC 9mm, but the PF9 STILL RIDES ALONG!!!
@G1721jeff I think that would add unnecessary weight and complication? But I guarantee you Chad is listening!! Kel-Tec is continuing to 'blow my mind' with its innovations and great customer service and care, youCOULD NOT ASK FOR BETTER C.S.!!!
So I'm wondering with the bullpup config being a little different in a shotgun vs a Steyr for instance, what is the trigger like? Is the linkage travel shorter? Or is this a typical "where's my hammer" to get the thing to fire? I think a heavy trigger in a "tactical" shotgun of this type is not as bad in say a duck gun, but it would be nice if it wasn't 12 pounds. Inquiring minds want to know.
@Kawriver The trigger pull is amazing. There's a VERY slight bit of creep and a nice, crisp snap... it's almost exactly like the trigger pull of an RFB. Can anyone from SHOT Show that dry fired either the KSG of RFB respond to this comment and let Kawriver know what I'm sayin'? Basically... can I get an "Amen"?!
i live in the crappy state of maryland so i cant get any magazines over 20 rounds. With the rfb and the ksg i think i may of just found my new loadout.
@SQUATLOW1979 Been testing that and so far I haven't had any issues with that, BUT I would like an extra inch on the barrel as well and we're talking about doing that down the road.
Cool music in this one at the beginning. And wow that PF9 is snappy indeed! That's why I decided against it to be a carry gun. If you get a lightweight, thin, decent-powered handgun you have to pay for it somehow.
The KSG is awesome and it would be even better if offered in .410 bore to the same specs, recoil would be less of an issue,also due to the lighter recoil it would be great for a family use HD gun.
It would also provide more punch than the taurus judge with the same ammo (Winchester PDX-1 for example) .
@Pfletch83 We're keepin that option open for the future for all you .410 fans out there. But if I may metion something about the KSG's recoil... it doesn't have nearly as much recoil of any of my other shotguns. That Bullpup design redefines shotgun recoil.
Kel Tec continues to amaze me at what a lil' shop can do with such big ambitions!! I LOVE THEIR SU-16 PDW, it got a military solicitation for... something, I think it was for pilots or some such? But, they have
kick ass intro music!
TheIronBandana 1 day ago
Chad smokes a bit.
nophwa 2 days ago
Keltec is by FAR the best quality for the money. Best ergonomics by far. There basically selling weapons with glock like reliability for half the price. Check them out if u haven't already, they (from expirience) have the best customer service.
domandape 3 days ago
Will do a backflip for the name of this opening song
MadtactiX 1 week ago
stupid question what state r u in?
MushroomPictures 1 week ago
kind of cool
MrSKSforLIFE 1 week ago
17:32 not to be a fan boy but that looks like a gun from halo 3 the DMR
AfKman101 1 week ago
I agree. that Keltec Factory vid needs to happen!
garrettdutton10 2 weeks ago
NTF GONE TECHNO
nixymagoo 2 weeks ago
Still waiting on a keltec factory vid. That would rock becaus i have a real interest in keltec.
FuzzyLovesGuns 2 weeks ago
That dude was chill. Great booth review all around.
133j0hn 3 weeks ago
15:16 LOL, granny truckin' it on a go-kart!
133j0hn 3 weeks ago
TECHNOPARTY!
pointer802 3 weeks ago
That PF9 looks like it has a ridiculous amount of muzzle flip.
onetaothree 3 weeks ago
a year ago and still no KSG!!!?!!
Go to hell Kel tec, if i wanted to be teased by something i can't have, I'd go to a strip club. Kel-Tec are the pole dancers of gun mfg, they tease you with eye candy then wont give out when you decide to buy /snatches his buck back from kel-tecs g-string
HvinnyTheViking 3 weeks ago
ooohhh dude i want to shoot with you as well!!! XD
21creed 1 month ago
kel tec is the dodge neon of fireams
sup4fr34k 1 month ago 2
I am gonna fill my house up with Kel-Tec firearms....I love em ;) I may have a shiny new KSG at my LS tomorrow if they come in, cant wait. Sub 2000 will be next.
sirtom68 1 month ago
@sirtom68 your all over his channel? haha you criticized me 4 saying I was buying this weaponI? WTF Dude 4gods sake! ur board and confused! The Ksg will b my newest bad ass shot gun with 7+7 + 1 ready go the MVF-515 ordered for the bottom rail of my new jewel funny you asked me a few hours ago if I was getting this jewel sense it was in a video game and no I love nice shit & firearms or guns..lol any ways enjoy all of ur kel-tech stuff my safe will only have from them the ksg and 308 Rfb :) !!
toty052502 1 month ago
@toty052502 I honestly have no idea what you are talking about.
sirtom68 1 month ago
This has been flagged as spam show
@sirtom68 well you wrote me this on his other vid (why would you want that uglt thing cause it was in a video game?) and this is where it started from! you criticizing me for buying one .. After i complemented his video and said my ksg its on its way in the mail!!
yet you wrote on his I am gonna fill my house up with Kel-Tec firearms....I love em ;) I may have a shiny new KSG at my LS tomorrow if they come in, cant wait. Sub 2000 will be next. sirtom68 4 days ago DUDE UR FULL OF IT!
toty052502 1 month ago
@sirtom68 BTW kel tech is cheap shit but the only 2 kel techs' in my safe are Ksg 12g and .308 Rfb the shot gun can be found from 1200 and up the Rfb 1600 and up! sub 2000 junk pistols junk so fill your house with junk and leave me alone!
toty052502 1 month ago
I have a love hate relationship with Keltec,
I LOVE so many of their products, and HATE that they cant provide them when I'm ready to pay my money down
There ALWAYS seems to be a production issue with anything they sell, so as a result I have a lot of keltec competition items. because I WON'T WAIT
if you don't provide me with your product, your competition WILL provide me with theirs. get your production poop in a group KelTec and perhaps I'll be "privileged" enough to send some money your way.
HvinnyTheViking 1 month ago 2
This has been flagged as spam show
Kel Tec guns are hard to find, they really need to increase production!!!
FishHobby1984 1 month ago
2012 AND STILL HAVNT SEEN HALF OF KELTEC GUN ON THE MARKET BRAHH
ninjatears 1 month ago 2
I watch this video from time to time just for this opening song.
MadtactiX 1 month ago
Semi auto please! Im sticking with Saiga.
Morepullups 1 month ago
At 00:03 a pocket clip on a gun! Great idea I was actually thinking about not too long ago.
KevlarWhite95 2 months ago
Make the switch out of ceramic thatll b hard to wear LOL
TheKimberRifleBloke 2 months ago
I just recently subscribed to your videos........they're seriously awesome man! The only bad thing is they make me want to take my credit card to every gun store and keep buying more guns! haha
tranklerd1 2 months ago
kel-tec reliability is a question in my mind! I've seen the pmr, the ksg and some other guns from keltec that just don't work as good as other products. I'm personally not going to spend any money on a keltec that hangs up evry other shot.
13mrcrask 2 months ago 16
@13mrcrask I own several Keltec handguns. After a decent break in period, and with minimal maintenance, these are just as reliable as anything I've ever used. I pull the trigger, it goes bang and reloads. Every time.
rbryanhull 3 weeks ago
@13mrcrask I believe you have been misinformed and do not have any in person experience with kel tec firearms.
Kylef7735 1 week ago
Kel-Tec may dominate the world, if they can meet production.
southerndeth 2 months ago 50
Great job guy's! That shot gun looks bad ass!
iluvmym4 3 months ago
Shoot man, I like how you pointed out wear and pushed that salesman. Pun intended.
Vydonis 3 months ago
Sexy gun... if anybody wants to donate me a KSG I would be eternally grateful and name my future child after you
bulbinking 4 months ago
He said whatever to Ruger question and I own a Ruger and one Kel Tec but at least the Ruger weapons seem to really be able to be obtained. I wanted 3 of the Kel Tec weapons and or appears about 75% of them you cannot find. Ong
medic4832 4 months ago
what is the carbine on the table above the KSG?
rockstarr469 4 months ago
Nutn' is highly personable gun nut.
utube11505 5 months ago
18 round shotgun isn't legal in California. :(
Falsitive 5 months ago
@Falsitive Hate to break it to you but 7+7+1 is 15 rounds not 18, its ok not everyone can count.
teflonsmoov 5 months ago
@teflonsmoov he says 15 rounds dope
rockstarr469 4 months ago
@rockstarr469 not nunfancy you retard, someone posted "18 round shotgun is illegal in california" learn to read "dope"
teflonsmoov 4 months ago
@Falsitive it is 15 rounds, not 18. But it has a 18.5" barrel, which is also legal
BlunTTipps 4 months ago
@Falsitive it's technically considered 7+7+1. lol
Symbiot5 4 months ago
what is this track,, i love it ....holy Techno batman
JACKMOENLOKI 5 months ago
Let me just say my opinion: The Kel-Tec is the first military shotgun that holds more than 10 cartridges without being 4 feet long.
SuperRip7 5 months ago
this should replace the mossberg as the standard shotgun for the army
choopdewoot 5 months ago
Gotta say it. These reviews are very influential in the process of narrowing the field in making a final decision on gun purchases. Nuttin, the hat's off to ya. You're providing a very good public service, sir. Many thanks!
SouperAsH 6 months ago
i love that smg its like a 22wmr mp7
DramaticGnome1210 6 months ago
i am more impressed with Kel-tec every day. they have good guns high quality and a good price range!
popeinthescope 6 months ago
i would love it if they made a steel frame gun of some sort. if keltec made a 1911 that would get some people in their pockets right away. something in 5.7 would be awesome too
choopdewoot 6 months ago
the pisotl grip looks like the recycledd a pmr grip
greekmytholigy 7 months ago
The problem with this gun is that most of us will never even get to see one to buy. Too much demand and not enough guns to go around. What a teeze.
TacticalSoleSurvivor 7 months ago
Have u checked on C3 Defense complete rifles?
trainwreck003 7 months ago
cant decide if i want this shotgun or an AR
Rossowens 7 months ago
@Rossowens This.
-Chad
chadderick71 7 months ago
KSG looks beautiful
gedkidd17 7 months ago
id trade 2 ounces for 5 extra shots anyday. the p11 is awesome.
TRUTHandANSWERS 7 months ago
hey nutn, or veri, someone!!! i was flipping through the sept. 2011 issue of guns&weapons and guess what i saw??? a savage add for the model 110 b.a.
you know what it said? it said, and i qoute
"we call it the B.A. even though it`s the farthest thing from `liberal arts` imaginable. However, if you use the creative side of your brain, it won`t take you long to figure out what B.A. stands for"
sounds kinda similar to your comment in the video, huh? they should pay you for that.
pony69nd 7 months ago
About that RMR-30, wish I could get it in other calibers like 9mm or 45ACP and use Glock mags. Now THAT would be EPIC AWESOME!!!!
mdredheadguy1979 7 months ago
@mdredheadguy1979 Sub 2000, buddy... they take Glock, S&W, Sig Sauer and Beretta mags, and they come in 9mm & .40 S&W. I have a Sig .40... I put a quadrail and an Aimpoint T-2 red dot on it and it rocks! Plus they fold in half (with stock sights). Check them out on our website. And stay tuned for a TNP review of his sub 2000.
-Chad
chadderick71 7 months ago
@chadderick71 I didn't know that! I've been looking around for a handgun/carbine combo that uses the same ammo AND same mags for a few years now despite other people telling me how stupid the idea is. I live in Comie-Maryland where I have to travel out of state to buy and own a magazine that holds more than 20 rounds. So I thought that if I could have a handgun/carbine (like your PMR and RMR) that would make it easier.
mdredheadguy1979 7 months ago
Do you have ANY more information on that RMR-30? That thing looks sooo AWESOME!!!!
mdredheadguy1979 7 months ago
@mdredheadguy1979 The KSG is priority #1 at the moment... HOWEVER, Tobi is also working on the RMR-30 and getting it ready for production. We hope to be producing parts for it after the holidays, so we're looking at early 2012.
-Chad
chadderick71 7 months ago
@chadderick71 Sounds great! I look forward to being able to buy them BOTH! And the RFB, and the PMR, and... Well you get the idea :-)
mdredheadguy1979 7 months ago
I initially did not want the KSG when it first came out. Keltec has addressed the Trigger Control, added cut outs so you can see how much ammo you have in each tube and used Nutn's input on where to put the single point sling. I would sell 2 of my shotguns and get this one and I like the OD Green over the Desert Tan. :)
frankgon4 7 months ago
21:28 nice boobs ;)
ramb0nat0r 7 months ago
@corneredfox class III firearms technically don't even exist in America. It's just a designation us civilians created. Now that I think about it, you're right SBRs aren't class three, they're class two. Along with silencers, AOWs, and SBSs.
MrBigBearBrown 7 months ago
@nutnfancy why don't you ever buy any class three stuff? You can get some slick short barreled rifles these days.
MrBigBearBrown 7 months ago
@MrBigBearBrown Short Barreled Rifles (SBRs) and Short Barreled Shotguns (SBSs) are not Class III weapons, they are NFA weapons. You can obtain them legally without requiring an Federal Firearms License (FFL) and Class III Special Occupational Taxpayer (SOT) license. There is a lot of paperwork involved, and a one-time $200 tax per item, but that's it. Automatic weapons manufactured pre-198(6?) also are NFA weapons, while those manufactured after are Class III weapons.
corneredfox 7 months ago
KSG! XMAS 2011 :D
thaddeusabear 8 months ago
@thaddeusabear i think i want the Kel-Tec PMR-30 for xmas. i hope TNP does a review on it.
blaziankhmer 8 months ago
@blaziankhmer pretty sure theres a bit of a run n gun with it
thaddeusabear 8 months ago
@thaddeusabear yea i found that out and stayed up all night watching all 4 parts, =\ he needs to make shorter videos man.
blaziankhmer 8 months ago
@blaziankhmer Can't beat a 30 round standard size magazine, however the PMR has had its fair share of problems, with a few people reporting it firing out of breech and destroying the weapon and potentially harming the user. Kel-Tec said they're going to upgrade the strength of their slide to prevent harmful shrapnel, but last I heard they were blaming the ammunition for it firing out of breech. Me personally, I would wait a little bit in case more issues arise.
corneredfox 8 months ago
@corneredfox oh thanks for telling me this, i came very close to ordering one since i am attracted to the 30 round wmr. shooting a 9mm and .223 gets expensive. that's why my 10/22 is still my favorite because i don't feel guilty shooting 500 rounds a session. well thanks for the insight, i guess i'll wait, hopefully ruger copies the design and make it better lol
blaziankhmer 8 months ago
@blaziankhmer No problem, I suggest keeping updated on it though, constantly look up reviews and whatnot. Kel-Tec themselves said the idea of pieces of the gun becoming lethal shrapnel was too dangerous and began improving the gun's integrity immediately. Not sure if it affects you, but they used to have a disclaimer on their site saying to not use ammo from the Philippines, as well as a list of recommended ammo (though I can't seem to find it at the moment).
corneredfox 8 months ago
i noticed your clip on the pf9? i'm guessing how do you like that vs a holster for carry?
thaddeusabear 8 months ago
RE:RMR: I've seen/heard a lot of talk about how under powered the .22 mag is. Those people don't know jack! If you can hit where you're aiming, you can drop the biggest toughest guy in the world with one round of .22 short! Besides all tactical situations don't involve turning the bad guys to pudding. Sometimes you need to take prisoners and you can put .22 mag through a shoulder or knee without taking off an arm or leg. 5.5 & 7.62 not so easy to stop the blood loss.
MrInspector 8 months ago
I'd really like to see the gun have the ability to alternate between left and right mag tubes while shooting.
jonr620 8 months ago in playlist GUNS
INCREDIBLE!! Kel-Tec is really stepping up their game with some VERY nice products. The KSG, PMR and RMR are on the WTB list, for sure ;)
Thanks for all the great work Nutn...keep em coming brother :)
FuKnOveRkiLL 8 months ago
PMR 30 CARBINE!!!!!!!!!! SKEET SKEET SKEET SKEET SKEET!!!
CombatMasterpiece 8 months ago
I'll will be buying the shotgun.....for skeet shooting lol : )
CarbonKILL 8 months ago
This has been flagged as spam show
TU LIS CE MESSAGE (t'es mal)!! Je sais pas si je doit le croire mais je préfére ne pas prendre de risque... Dsl
1945,une jeune fille nommée lata kulu vint en Amerique dans un bateau gris venu d' Afrique. Un homme etrange la tua en gravant le mot "LATUALATUKA" dans son dos. Maintenant si tu as lu ce message elle viendras pendant une pleine lune dans ta maison et volera ton ame a moins que tu ne suives ces instructions.
1.Reecris ce message en commentaires dans trois autres videos
TheMazor 9 months ago
I am sorry for the question, but I am new in the shotguns world, I like this one very very much, but can you use in this one the non lethal gauges, or the non lethal gauges are shooted form a especial shot gun? you think the pumping shotguns are better than the atomatic, and why?
belzach 9 months ago
Damn, that Tapco girl was smokin. Sweet review too man. That shotgun is bad ass.
zZrEtRiBuTiOnZz 9 months ago
oooh what the fuck the amount of recoil on that 9 mm pistol is ri·dic·u·lous xDDD
Imahappylittlewhore 9 months ago
This is (by far) the best firearms review on YouTube... Period. Because of your efforts sir, I am entirely sold on the PMR, RMR AND the KSG. I have only one gripe with you though. When my wife leaves me for buying all these guns...I fully intend to blame you... And Kel Tec. Keep up the great work brother!
zkmurphy1 9 months ago
i want his job.
doodthisguysawesome 10 months ago
I have to know, though this isn't really the place to ask, but...
Any chance the KSG will load the Aguila Mini-Slugs? They hit about like a .45 ACP and would be great to have that option with 00 buck at the flip of a lever. :o)
AaronAlso 10 months ago
@AaronAlso Those hit way harder than a .45acp. Closer to a .454 Casull, though with less penetration due to diameter and construction. But its a ~380gr slug at 1250fps so its a lot more like the .50AE than anything, though with larger diameter.
JLindenwood 9 months ago
@AaronAlso It functions with the 2 & 1/4 mini shells... but anything smaller won't cycle all that well. The 2 & 1/4 shells will give you 8 shells per tube ;)
-Chad
chadderick71 9 months ago
I want that rmr30 too lol
Shadow88Warrior 10 months ago
Hey Nutnfancy
I just want to say something nothing against keltec seriously I want one of those shotty's bad my preferred long gun is a shotty and those looked sweet but im hopeing keltec won't pull the same crap they pulled with the Pmr30 Like i said nothing against keltec they make sweet weapons but when the pmr30 became an issue of obtaining they lost a little respect from me is all.
Still love there stuff just don't like getting my hopes worked
Love your vids keep them up
Shadow88Warrior 10 months ago
1337 likes
theflash9119 10 months ago
I like the overall design, but I would opt for the Saiga. My main reason is it's not a semi auto.. Why? Is it because they wanted to hit the California/Canada market? I don't get it. That shotgun would be amazing if you had the option like on the Franchi spas 12 to switch between semi and pump for those that were concerned with "ammo management" .
I gotta commend them on the design and the round capacity with no magazine, but make it a semi auto and we will talk. Saiga wins this round!
MrWalkingparadox 10 months ago
Nutin fancy thanks for your fine reviews. Gun toting Gals watch you too!
oreandra 10 months ago 24
@oreandra Thanks for watching!
nutnfancy 10 months ago 11
@nutnfancy Cant stop watchin your vids keep up the good work!
MegaMagpul 6 months ago
Tell that clown at the end of the video to quit pumping the KSG in the back round, I can barely hear the review.
Graychristopherr 10 months ago
whats the name of the song?
ZAC2994 10 months ago
Kel-Tec KSG Reping the Primary Arms Micro Dot!!! Thumbs up, its a great little RDS.
Cisco1234567 10 months ago
the info tells where the intro music is licensed from but whats the song name?
lowglove 10 months ago
the info tells where the music is licensed from but whats the song name?
lowglove 10 months ago
Great video, fun!
Rock on KelTec~!
azis1100 10 months ago
hÏhi_Ãñý0nE_wÅNña_chât_wÍth_mè_I_fèèl_só_lönelY_tõÐäÿ■
BabeiiSanaay615 10 months ago
Kel-Tec has been inpresing me and many of my fellow shooters. And having that Florida flag dont hurt. And I injoyed getting to fire alot of their new firearms. Now I'll be shamful, I'm always open to test fire your firearms and give a opinion & writeup from a daily consumer shooter.
TwistedMinded 11 months ago
ur the best nutn
sativa4821 11 months ago
Chad from kel tec is awesome!
KevinMichaelMichael 11 months ago
Just an FYI on that optic, it's a Primary Arms Micro. I've got two. They're absolutely fantastic. You should totally do a review on them, you'll like em.
keylios 11 months ago
15:17 PIMP DRIVE BY
Robinson4643 11 months ago 21
Feeling the kel-tec love!
My sub 2000(glock mag 9mm) is coming on monday WOOOOT!
Lets see a sub 2000 review!
xxturbowesxx 11 months ago
I still believe they should make a 50 rounds mags
aramanx 11 months ago
Man if that rmr was in 17hmr...
k24a2ek9 11 months ago
I emailed kel tec about the rmr 30...they said it won't be released until late this year and won't see mass production until early next year. That sucks!
krash19777 11 months ago
I rely hope kel tec will listen to nutnfancy and look at the views on this. I am sold on one but if it had the mods discussed in this video it would be prime!
mtsEnrique 11 months ago
longer barrel and mag tubes please more capacity is never a bad thing and that RMR is sweet! great survival gun. kinda looks like a refined Feather USA Rifle
PerpetuallyVigilant 11 months ago
longer barrel and mag tubes please more capacity is never a bad thing
PerpetuallyVigilant 11 months ago
I liked the video but i was kinda dissapointed that there wasnt anything on the RFB since thats the thumbnail
hotshotgunner44 11 months ago
Loving the new linup. Always a great review when you have down to earth, common sense, and no BS sales reps to interview.
Warsign01 11 months ago
The new KSG and SU series look fantastic!
TheAKOmnicide 11 months ago
@budojon
Are you kidding, the KSG is not Neostad at all.
An upside down neostad though :)
Someone at KelTec just read the blueprint for Neostad the wrong way and said, hey this is a winner.
Southpaw720504 11 months ago
fuck man. i might as well just put kel-tec in my will. I'm going to continue to NEED everything they make. the KSG and RMR are a must!!
sonick808 11 months ago
Within the first few weeks of owning a P-32 I ran 500rds of .32 auto in a variety of FMJ & HP with zero failures. This last summer after returning from my Army reserve AT I discovered that my wife had unknowingly set several heavy ammo cans on top of the P-32 in one of our safes. This warped the slide to the point where I was unable to put the slide back on the frame after removing it. Kel-Tec fixed it at no cost to me & in the process turned it into a 2nd Gen P-32. Kel-Tec rocks.
paomtep 11 months ago 3
KSG... I gotta have one!!!
loki60409 11 months ago
its funny nitnfancy taks about that keltec`s stuff got copied by ruger. the guy from keltec doesnt complain about it, because this "new" shotgun looks just like never produced neostad 2000. it looks like 90% got copied from the neostad. all the compinies use ideas from other companies and assemble it a litle different. it happened sooo many times.
budojon 11 months ago
P.S. No criticism here for nutnfancy he's doing a great job reviewing stuff. I've gone out and bought a lot of survival items based on his recommendations. I'd rather see it in the use of someone who's needed it in the field, then in a catalog.
OliviaSST 11 months ago
To that end the point I'm trying to make is that all this plastic and inferior quality does not add up to a good defensive, fun, or investment firearm. Go find a used .38, .357, .44 or the like and spend about 350 to 400 and you will have something that will not cause you any trouble while you own it, that you can hand down to your great grandchildren, and that you can enjoy every weekend for the rest of your life if you should so choose. It will work every time its needed to defend your home
OliviaSST 11 months ago
@OliviaSST YO OLIVIASST IM REAL HAPPY FOR YOU... IMMA LET YOU FINISH BUT GLOCK HAD ONE OF THE BEST AUTOLOADING PISTOLS OF ALL TIME
millersayshi 10 months ago
@millersayshi How do you qualify or quantify BEST? My comments refer to historical RESALE values of weapons used for both ENJOYMENT and INVESTMENT. Glocks have flooded the market and there is very little pressure pushing the prices up of these firearms above their historic levels. The .38's, .357's, and .44's I purchased in the 80's and 90's are retailing USED in firearms stores for about 3 times what I paid for them now. And some of them you can't even find in stores.
OliviaSST 10 months ago
You can buy a very good shotgun for 125 to 175 at a pawn shop with significantly better quality then this.
I watched at the range one day two weekend shooters with Glocks both of which had the magazine retention device snap and fall out of the weapon and discharge the magazine onto the ground, thus creating a SINGLE round weapon. How is that going to be helpful if you are using it for defense? You might as well carry a derringer. To that end the point I'm trying to make is that all this ..
OliviaSST 11 months ago
It would be at least 500 to 700 dollars in todays market (even more if you purchased the rarer coveted designs) and you could hand it down to your grandchildren.
Now they turn out plastic injection molded parts and snap them together with people who simply feed cheap parts into machines. They hardly test these weapons, nor design them to last through 1,000 of rounds or years of use. And for that they want to charge 880 dollars? You can buy a very good shotgun for 125 to 175 at a pawn shop..
OliviaSST 11 months ago
This has been flagged as spam show
Remember when a Firearm was built as well as a sewing machine and a typewriter? That mean all high strength steels which were quenched to create the best hardness, turned out by hand and then carefully assembled and tuned by a master gunsmith in the factory? Back then a tank of gasoline cost 6 to 8 dollars and an extremely well built Smith and Wesson piston cost about 125 to 175. That pistol will last 200 to 500 years if you look after it and fire 2000 rounds without a jam. It would be.....
OliviaSST 11 months ago
great design; however, i would LOVE to see a semi auto!
MrAsundstrom 11 months ago
Comment removed
OliviaSST 11 months ago
the only way one man can tell another man "I love your accessories" and it not be gay.
Fuzzy3676 11 months ago
what is the name of the song at 27:03?
dobermansnp 11 months ago
Kel Tec has really stepped up their game and it shows. Bravo.
rocktruggy03 11 months ago
That Sig at the beginning is kinda fugly and chunky looking. Makes my P95 look streamlined.
Scorpiuszeroone 1 year ago
Dig the music :D
Doctorchops 1 year ago
I like the Kel-Tec RFB because we civilians are not allowed full auto. If we cannot fire several small 5.56 or .223 bullets, we should fire one 7.62 or .308 bullet. The RFB is only about twice the size of a big .45 handgun but is much more effective against bad guys wearing body armor. Only the heaviest chest plate armor will stop these rounds. If your bad guy is over a100 meters away this weapon will keep him there, even if you can't hit him.
Skeptic121 1 year ago
you sir just made me a kel tec fan!
GunGuru72 1 year ago
I'd love to see a SUB2000 in 10mm!
MrShawnc992001 1 year ago
@MrShawnc992001 I wanna see one in 7.62x25 tokarev!
OBLIMINON 1 year ago
@MrShawnc992001 no doubt! That would be a fantastic hog gun that you could fold up and stick in your pack...
tybeejeffro 1 year ago
@MrShawnc992001 I would too, but one will never come out, haha
Kylef7735 11 months ago
Will the shotgun take shells longer than 2 3/4? +1 on a little longer barrel option and some sort of choke device. Love the RMR 30 22mag too. Would be killer if it could be made to also shoot 22lr, or come with a kit to adapt for 22lr use. Speaking of not keeping up, I still can't find a SU-16C in Arizona :(
AnAbortiveRomance 1 year ago
Awesome. I want one in the OD Green.
AnAbortiveRomance 1 year ago
@AnAbortiveRomance You should get one in every color ;)
chadderick71 1 year ago
NOOO!!! You went right by the PLR 16 without any comments! I've been dying to know what your take on them. Can't wait for the Kel-Tec factory tour vid!
vladzizka 1 year ago
I know I mentioned this in another video, but I think a review on the Kel Tec Sub2000 would be awesome! I hate making a buy without hearing Nutn's say!
mrpibb008 1 year ago
@mrpibb008 What are your questions about the Sub2000s? I'll tell you my absolute honest opinion about them. I have the .40cal... I built it myself, so it's pretty awesome, but the stock Sub2000s are ok out of the box. For the price you can't beat them. There are quite a few modifications I made to mine and that's good thing to point out about them... you have options... ways to make them meet your shooting requirements for a low cost. You can also take a Sub2000 to any range.
chadderick71 1 year ago
Nutn thanks for the vid, i have one question i understand you like the pf9 but you also own the Kahr Pm9, yet you are always carrying the keltec pf9 why would you carry the keltec instead of the kahr? the keltec may be a fine weapon but the kahr is far superior
avi614614 1 year ago
A BIG RESOUNDING THANK YOU TO CHAD AT KEL-TEC FOR ACTUALLY COMING AND ANSWERING ALL THESE QUESTIONS!!!! That really shows those out there who havent had the PLEASURE of dealing with your AWESOME, truly AWESOME customer service an example of how you operate, THANK YOU FOR ALL YOUR INNOVATION!!! And for really putting the pride of ownership, and pride that 'Made in the U.S.A.' means when its a Kel-Tec! I might have 'upped' my capacity for CCW w/the XD-SC 9mm, but the PF9 STILL RIDES ALONG!!!
reeseman67 1 year ago
KelTec KSG should have double barrels to go with each magazine tube
G1721jeff 1 year ago
@G1721jeff I think that would add unnecessary weight and complication? But I guarantee you Chad is listening!! Kel-Tec is continuing to 'blow my mind' with its innovations and great customer service and care, youCOULD NOT ASK FOR BETTER C.S.!!!
reeseman67 1 year ago
@G1721jeff That'd be awesome!!
chadderick71 1 year ago
So I'm wondering with the bullpup config being a little different in a shotgun vs a Steyr for instance, what is the trigger like? Is the linkage travel shorter? Or is this a typical "where's my hammer" to get the thing to fire? I think a heavy trigger in a "tactical" shotgun of this type is not as bad in say a duck gun, but it would be nice if it wasn't 12 pounds. Inquiring minds want to know.
Kawriver 1 year ago
@Kawriver The trigger pull is amazing. There's a VERY slight bit of creep and a nice, crisp snap... it's almost exactly like the trigger pull of an RFB. Can anyone from SHOT Show that dry fired either the KSG of RFB respond to this comment and let Kawriver know what I'm sayin'? Basically... can I get an "Amen"?!
Thanks for being here! Rock on :)
chadderick71 1 year ago
i live in the crappy state of maryland so i cant get any magazines over 20 rounds. With the rfb and the ksg i think i may of just found my new loadout.
strykersigma 1 year ago
@strykersigma So glad we can be a part of your future fun! Rock on!!
chadderick71 1 year ago
I vote to extend the KSG barrel an inch to keep from blowing away the sling if it gets a little loose on the front swivels.
SQUATLOW1979 1 year ago
@SQUATLOW1979 AGREE!!
reeseman67 1 year ago
@SQUATLOW1979 Been testing that and so far I haven't had any issues with that, BUT I would like an extra inch on the barrel as well and we're talking about doing that down the road.
chadderick71 1 year ago
Cool music in this one at the beginning. And wow that PF9 is snappy indeed! That's why I decided against it to be a carry gun. If you get a lightweight, thin, decent-powered handgun you have to pay for it somehow.
RevolverPhantom 1 year ago
The KSG is awesome and it would be even better if offered in .410 bore to the same specs, recoil would be less of an issue,also due to the lighter recoil it would be great for a family use HD gun.
It would also provide more punch than the taurus judge with the same ammo (Winchester PDX-1 for example) .
Pfletch83 1 year ago
@Pfletch83 We're keepin that option open for the future for all you .410 fans out there. But if I may metion something about the KSG's recoil... it doesn't have nearly as much recoil of any of my other shotguns. That Bullpup design redefines shotgun recoil.
chadderick71 1 year ago
9:05 lol
L4ch74n 1 year ago
Kel Tec continues to amaze me at what a lil' shop can do with such big ambitions!! I LOVE THEIR SU-16 PDW, it got a military solicitation for... something, I think it was for pilots or some such? But, they have