Dr. Shadow Fully Mods his PS3 TE Stick!!!! PT1

[CharlieFex]

the tip of my mic broke off and is stuck in my TEs headphone jack anyway of getting it out?

[NickDininno]

WTF's with the knife? Use the proper tools to cut wires. You might as well swing an axe at it. . . .

[RodmanIsASadPanda]

Sorry to be asking so many questions lately, but what size were the replacement screws you used for the top?

[ShadowEclipse99]

@RodmanIsASadPanda It's okay man. ask away: When I did that Mod I used some left over screws that my dad had however the size you need for replacement screws are M4 x 12mm and if you need to replace the nuts inside it's the M4 Nut

[RodmanIsASadPanda]

Do you have any idea where the PCB is im the PS3 version of this stick? I'm going to replace it with a 360 PCB so I can do an autodetect dual mod.

[ShadowEclipse99]

@RodmanIsASadPanda If I recall correctly in the PS3 TE the pcb under the turbo panel is the ps3 pcb.

[RodmanIsASadPanda]

Wow, I finally got Madcatz TE, I bought it new from one of their sponsored sites, Gameshark, and it came with one of the top screws missing. :| I'm not gunna send it back though because it works fine and I'm going to replace those anyways.

[GeneticBrand]

do you take steroids



[tyraj]

LS-32 is godlike, cheers to you!

[theFaded01]

The way to prevent activation from the wires is to cover the ends with the plastic covers

[GRINACE]

Dude we totally have the same voice o.o

[ShadowEclipse99]

@GRINACE Well Greatness Comes in pairs LOL

[dfw0jay]

Iraqi knife failed you xD

I would of just left the Rubber Covers over the metal connections, and taped the wires down. (Never know)

[SA8TER21]

@dfw0jay

That or just remove the wires from the terminal strip then he would never have to worry about them and he would have 2 pairs of wires for extra. :P

[EmperorJoker956]

Where can I find like artwork and new covers for my arcade stick?

[ShadowEclipse99]

@EmperorJoker956 Well if your looking for artwork there many places to look but Google image search is a good start. now by covers do you mean the Plexi? if so please check out art's hobbies for all your plexi needs.

[SFxXRobZombieXx]

Do you recomend to unscrew from the top or the bottom

[ShadowEclipse99]

@SFxXRobZombieXx Well it depends on the mod really. If your going in for a full dual mod then it would better to unscrew both the bottom and top but if your doing just the buttons, artwork and joystick mods, Top would be your best choice

[eyek0nz0rz]

2.35 - 2.37 = this is very different from zabaladabadabawah. ?????

[ShadowEclipse99]

I'm sorry about. I have tendency to speak very fast. To Finish the Sentence: This is Very Different From a Sanwa JLF

[eyek0nz0rz]

ohhhh okayy, thanks! i didn't mean to clown or anything, i just really couldn't understand. but word up, i got me a TE also. add me on psn: sugafreee619, we should play sometime!

[ShadowEclipse99]

No I understand it's Cool. yeah I would add you but My friends List is Full at the moment. Plus I'm waiting on Super Street Fighter to come out. I have not touch SF4 since the end of Nov, so If I were to play I would be so free LOL we'll play when SSF4 Comes out

[tyraj]

@eyek0nz0rz

"Different from any sanwa JLF"

[l3lue2ain]

can you possibly just keep the but not use them ? like instead of cutting tape them down they're or something?

[ShadowEclipse99]

Yes You can keep them, You can even put duct tape over them as well. Since I only play with 6 buttons I don't really need them.

[l3lue2ain]

@ShadowEclipse99

I had a lol 30min self reflection. It's like i don't use them either. But at the same time i press R1 and L1 in tekken to invite people. Irony.

[The1cemanCometh]

One thing I do with the connectors is insert the flat head screwdriver and slightly twist so that the connectors bend, then they pull right off. Then once I re-connect them, I use use tweezers to crimp them tight again.

[ZUNECARDSTV]

Hey changing the Gate on that stick will make it work like an American styles stick right?

I plan to get A Madcatz Round 2 TE stick.

Will be my first mod. lol

GT-Y Octagonal Restrictor Plate with a bat top for the stick.

[ShadowEclipse99]

yeah switching the gate to an Octo will give you more of an American style feel

[ZUNECARDSTV]

Nice. I'll keep u posted.

[ZUNECARDSTV]

Great video, you should have covered those wires with electrical tape instead of cutting them, You might want to sell the stick later on when Madcatz releases newer stick.

[ShadowEclipse99]

Thanks. I don't know If I would Sell the stick though because each one that I created has a little sentimental Value to me. I took time to create the color scheme for the sticks and for this one it took me 2 months just to find the pic. So I'm definitely gonna keep them and use them every once in awhile.

[ZUNECARDSTV]

I hear that.