Test of video with free energy by magnets

[machacoification]

i spent quite few hours trying over and over again, i am afraid the video you saw was really a prank

[miquelmahhhh]

thanks for show the true....... :)

[TheWesleyOne]

your magnets are sideways one pole should point out.

[mouayad888]

watch my videos and u will see what im talking about very soon,im making something rotating with magnets only its called the rotating bar,bye

[mouayad888]

puting two or more magnets together will rotate something i beleive that,why?because our beloved earth telling us that but we dont get it,i do

[goldgait1]

To the guy with the super glue... why not try putting that glue to some good use....I think everyone knows where you should put it

[ghawk1232]

The trouble with a belief is that one must then attack or harm others to defend that belief.

[TechPro3]

not all people can get it right - when you hold your hand still, it almost starts to gain speed, maybe you have mixed polarity of 1 magnet and simply making it all look stupid moron...

BUT You aint that bad as this guy:

"Free Energy Magnetic Motor BS" valveman12 (with 12 magnets)

thats a complete one.

[valveman12]

Yes a keyboard is a safe place to insult someone you don't even know. It says more about your character than anything else. It's funny how some people will believe in magnetic motors. Even when you explain why it won't work, they still want so much to believe. Well TechPro3, you keep believing in your Hillbilly Science.

[TechPro3]

look man, i know that free energy exists for 10 years now. i also believe that there is such technology on this planet that will be revealed to people only in 1000 years, and all this magnetic energy stuff is something what poor people are trying to share with poor people and riches are doing everything to get richer

&

if i insulted you i apologize, simply don't like people that are pretending to be an idiots and cover the truth up

[valveman12]

What cover-up of truth? This magnetic motor stuff does not work. That is the truth. I could give you the Scientific and Engineering reason why but it would take too much time to explain. Magnetics is a natural phenomenon and like all natural phenomenon, seek equilibrium (resting state). If the magnets had a varying field then this would work. They don't so that is why it does not work.

[TechPro3]

Well I believe that by turning magnet to certain angle, one can get more for eg. pushing power than pulling, and that is enough to create a push - or the other way around pull. also here in some videos are shown prototype by one person, and then builded the real metal peace of art - WHO would destroy gigantic and expensive peaces of metal if prototype is not working :)

and once again if you will fallow videos, everything is done by 1 person.

[valveman12]

@TechPro3

You have never tried this. Yet many have without success. So why haven't you tried it and show us all how t do it instead of providing a lot of lip service that translates to nothing. I challenge you to do it and post your video. Otherwise this is just a bunch of conjecture and not worthy of note. Enough talk. Show us all how it is done.

[mrmartyman7]

Everyone who does not support the average do it your selfer only aids to the power conglomorates . Don't you understand this it is very simple , I don't understand why everyone with common sense and ability does not pitch in and help each other . I can see the angle would have a lot to do with it because you would also be adding gravity to the equation disc horizontal the gravity would be pulling all magnets down at the same time allowing no momentum . vertical gravity would act like a brake

[mrmartyman7]

at the proper angle it could work . I have seen a lot of good inventions and ideas shot down because of negative people. Why dont you start a website called

Negative-Tube where you can all bash each other I'm tired of people that think they are so smart you Jerks have always stood on the sideline and said that aint gonna work I hope the guy who first tested the Stone wheel said ok if it is not going to work than I'm sure you wouldn't mind being tide to this rock down hill from my stone wheel

[lazyassman]

man every dumbass who tries this shit does the same mistake, why is he moving his hand forward and backward, that magnet is supposed to be static...and pleas watch his other WIDEOS.

this does work, but the magnets layout should be different, you can even use an electromagnet intead of the one he is holding in his hand

[valveman12]

Perhaps before you call people dumbasses, why don't you post your own video of this working? I know you won't because you can't make a motor out of just magnets. Use your common sense. If this was possible, we wouldn't be using fossil fuels to generate electricity. Think about it!

[DojiSan]

@lazyassman its not possible to do what the original video does because its a hoax!

[valveman12]

More proof this is impossible. Any video that shows this working is a fake.

[MegaTweek420]

i wouldnt say much,dude,u did urs wrong too,even if it doesnt really work,u did the experiment WRONG,just like he did,

[valveman12]

@MegaTweek420 Really! Now how would you know that since no one has been able to replicate this working. Therefore how can there be a wrong way? It's funny that all the Hillbilly Scientists have lots of opinions on how this should be done but none of you have stepped up and done it. You just talk nonsense DUDE.

[PixieCinnamon]

Funny that when I tried this same experiment it worked fine. Of course, unlike this guy (who waves the "pushing" magnet around like a little girl flailing her hand about to ward off something gross) I simply put my magnet in a stationary position and allowed it to push the wheel around. I didn't wave it around like I was a chimpanzee on crack.

[FromDream2RealityNow]

Put it as a response on youtube then and show us please!

[MegaTweek420]

if u guys would actually WATCH the video, replicate the experiment, AND debunk it,i would throw my towel in, but, dude,u did it all wrong,the magnet in ur hand,it has to be PARALLEL to the magnetic field of the magnets on the ring.that way it attracts the magnets on one side and repels them on the other,the same way the Mag-Lev trains work, ur magnet pole was pointed towards them,please try again

[fasterthandarkness]

i NOTICED IN THE VIDEO, THE ANGEL IS AT 45DEGREES. pERHAPS THE ANGEL OF THE ROTATING DISC IS IMPORTANT?...

You got to move a wing through the air correctly for lift..

I cant wait to trash the albatross of centralized power and replace it with abundance.. Think of the increase in the quality of life for everyone with free energy.. We can all float around the sun and sing koombi ah or something.. good luck!

[pcmatt2000]

wideos~ are good

[jasanpahaf]

hey, what if you put two of those each at 90 degree from the other, that might generate a more prolonged spin...

[lamujerperfecta]

valla mierda es que no te da vergueza

[MrSquidDick]

jo blo, why the fuck did you bring up race? When was the statement made that americans are stupid?I dont care what country you are from jo blo but you are clearly stupid and i agree stupidity is world wide, you should see the stupid drivers where i live-australia the lucky country,any way,point is,this is not a REPLICATION,look the word up in the dictionary,it failed because its not a replica of said invention,mine works,jo blows is too proud of traditional science to think outside the box.....

[silentsniperrr]

isnt australia full of outcast british prisoners?

[MrSquidDick]

Its not a replication, you are using a plastic lid and it dosent look like you have spaced those magnets evenly, give up your attempted replication doesnt work, or you could try again and REPLICATE it.

[jo3blo32007]

no, the problem is a magnet generator like this DOESNT WORK. and telling everyone that tries and fails that they "must have done it wrong" is the weakest statement you can make. unfortunately you're also correct. the only way to do it right is to put down the freakin' magnets, because as already stated... IT DOESNT WORK.

[jasanpahaf]

make a video response!

[jo3blo32007]

yet more proof that you cant sneak up on a magnetic field. :)

[STiELzephyr]

LOOK up the STEORN public demo in dublin going on right now , with replications prooving overunity done by JLN labs in france and others on youtube .

look up the lead out energy machine on display in hong kong also showing OU !!

look up rick simpson who is curing cancer and other illnesses with hemp (thc) oil.

good day all...

[dan020350]

One more thing, there were some videos from Mylow who confessed all his videos are fraud when someone explained he was using a wireless transformer- here is the confession " Mylow apologizes for fakery using fishline; shows cupcake"

[dan020350]

watch desertphile channel video response to " magnet motor - is this real " I hope that helped, because i tried to replicated what you saw as well because i wasn't an expert. Happy new year

[zklinski]

its because one is faced the wrong side I think!

[22395robot]

perhaps I did a mistake

[dan020350]

the reason why the LED magnet was working, an expert told me he was hiding a battery or transformer . Also you can see he edited the video.

[22395robot]

Are you sure he edited the video?

[dan020350]

@22395robot yeah, because he will take you all the way of the process which will take over 10 minutes ( you can measured it by how long did it take you to put the magnets in the lid )

[zklinski]

oh yea don't forget that the magnet he used to spin the generator was 3 times stronger

after u do that it should work

[SokkaMaster]

@dan020350 Dan, dan dan, the explanation of why the LED was working is because he turned a MOTOR to its reverse, i mean to a GENERATOR, try it

get a little motor, and a led, you can get it from a toy car , theres 2 terminals of the motor negative and positive, you connect one of each sides of the LED terminals and its done, then you try it, you have to spin fast the rotor of the GENERATOR (the motor in reverse) and MAGIC! you made LIGHT!

The magnets are there just to spin the rotor.

Chelo 16yo

[SokkaMaster]

@dan020350 Dan, dan dan, the explanation of why the LED was working is because he turned a MOTOR to its reverse, i mean to a GENERATOR, try it

get a little motor, and a led, you can get it from a toy car , theres 2 terminals of the motor negative and positive, you connect one of each sides of the LED terminals and its done, then you try it, you have to spin fast the rotor of the GENERATOR (the motor in reverse) and MAGIC! you made LIGHT!

The magnets are there just to spin the rotor.

Chelo 16yo

[WineAndGravy]

22395robot,

I know how bad it feels to spend several hours on the project and it doesn't work. The video was a scam, however there ARE other methods that work. I like Bedini and Keppe. Nice work!

[brotherbriann]

This cannot work, not in this setup. The first guys video was scam. You cannot "only repel" with magnets. As 1 is repelled, another is coming up behind it on the disk, which is equally attracted to the side of your stator magnet (the one you are holding). Thats why, if you just held your hand still, the lid would maybe wobble a few times, and come to a rest, because it has found a state of equilibrium between pushing 1 magnet and pulling on another.

Look up "Calloway V Gate" for better info.

[foupana]

You are using the wrong magnets ,in your hand you have to put one big and powerfull ,in the plate you have to put on kind of small and short because the atraction ,in this experiment you can try to change the position of small magnets in the plate,you want only repulsion you have to control the atraction,use some magnetic shield material,other thing atention to the polaritys the position make all the diference...good luck to the next experiments

[STARFIRESOLAR]

Nice try. Don't be too disappointed, That other man's magnet motor/gererator didn't work either. There was something that you couldn't see, or trick video work or something. Magnet motors don't work! If they did, we would have been driving magnet motor cars a long long time ago, and you wouldn't have an electric bill.

Magnet motors are a dream that will never come true. It's physically impossible. Greater minds than his have tried and failed trying to get this to work and it didn't.

[09205479428]

If this is your hobby, just keep toying with it.

You got nice hobbies by the way. Keep up the interest.

[09205479428]

Higher voltage ( bulb) would not work. It has to be compatible with what the motor can generate.

I recall now... for effeciency use 1.5 volts, 25 milliamps from radio shops.

I tried this, its not working yet..

Using conventional physics the system would only stabilize to equilibrium. I'm compelled to study this further because of " Coral " castl mystery. This is not Newtonian physics, its quantum.

[mrlowdangle]

but you knew it wouldnt work ..right??

i must admit,i enjoy watching americans get all excited thinking theyve solved the worlds energy problems because they found a few magnets and a motor to play with.. look how many videos they make with the same old stuff+same old american 'wow!' comments!! says more about the state of their education system than it does about energy or anything else lol

[22395robot]

I didnt were sure whether it will work, but if it work other companies will sell it and get rich

[jo3blo32007]

theres plenty of europeans and asians trying to make a free energy machine as well... dont get me wrong, they'll fail just the same, but dont act like its just americans. stupidity is a worldwide epidemic.

[09205479428]

He said use 1.5 volts bulb and magnets from speaker. I find it odd because not all bulb can light by turning motor. check that the motor turn is counterclockwise, also the bulb it has to be a special one ( that i need to check yet ). Also use two opposite magnets to induce the needed polarity to turn the wheel.

You have a good model already, try this.

I'll make one likewise.

just remember that the polarity of starter magnets must be alternating, otherwise the system will remain in equilibrium.

[22395robot]

I think the bulb is not important because you also could build a charging staion for batteries or something else.

[Random1765]

I dont know if this is possible but you want 1 side to have a push and the other side to not have any effect...

[JumpingMusic]

other side of the magnit moron! other side...

[LocoLuigi5]

maybe try turning the magnet around?

[snowbored84]

The problem here is how the magnets are set up on the lid... After a particular magnet is forced away, the opposite end of the magnet is exposed causing it to pull back to the source. In the original example he glued them face down on the lid so that only one end of the magnet would be exposed to the source

[jipidibipity]

the materials in the original demo are choice. that is- their structure must be 'duplicated' and not 'interpreted'. Lord knows I don't follow directions. Try to be more exacting.

[fangus503]

Also, the LED plays a part in this, too. It's a diode, and when the motor is in complete circuit, it makes resistance, and AC current. Thus, the LED could be causing the flywheel to spin regularly.

[22395robot]

You could be right!

[fangus503]

its not a philidelphia cream cheese lid.

[6418978876]

haha, your right, this guy is doing it all wrong. Gotta use the right lid.

[22395robot]

I took a lid of a cappucino or coffe box

[fangus503]

Theres your problem.

[magneticwebmastery]

In the original video he said he cut slots in the lid and slide the magnets into those slots with the polarity facing the same way all around the lid. Although the quality of the video is not that great, it looks to me like the magnets in the lid are 90 degrees to the hand held magnet. Is that wrong?

[22395robot]

Look at the comment of FreeMagneticEnergy.

But when I Watched at 1:40 in his video I thought, that the magnets aren´t looking to the middle of the lid.

[FreeMagneticEnergy]

easygreasy2 is correct. You do not have the poles of the magnets facing towards the inside of the lid, just like it is shown in the original video. Thank you for posting your efforts as this is why it's so important that we post our work whether we fail or succeed. I eagerly await your next video update.

[22395robot]

Are you shure, that the poles have to look to the middle of the lid?

[FreeMagneticEnergy]

Yes... because the magnetic poles point to the center of the lid in the original experiment.

[22395robot]

okay

[easygreasy2]

u r stupid, look closely how the polarity is and how u were holding the magnet, u used a 90 degree angle and was wiggling and bsing to make it look like it wont work come closer to 0 to 20 degrees to make it spin noob

im actually designing a large one of these after my small one worked fine, look up magnetic fields and how they work before u try to debunk something

[22395robot]

perhaps you are right but I tried to made it work but it didnt go

[FreeMagneticEnergy]

Yes... you are correct. He did not have the poles of the magnets facing towards the inside of the lid, just like it is shown in the original video. Thus the rotor magnets were 90 degrees out of phase. You say you are going to make a large one that works, if so, please post your results because I know you would have a huge audience if you succeed.

Thanks in advance.

By the way I am currently working on a very interesting design where you do not need a stator magnet to make it work.

[magneticwebmastery]

Would you be so kind as to post a video response showing your small experiment and giving us detailed, step by step? Also, I 'm very curious about your larger design. This is a visual platform so lets see it!