Peter Laquis' 570HP 20B 3 Rotor-1st Gen Rx7 GT42R

[JasonMann8]

AAAAHAHAHHA, I CANT BREATHE!!! TURBO IS TAKING ALL MY OXYGEN!!! (drop)

[Ronaldo95163]

ugh! why does he have those gauges outside the car???

[brandonBRKDWN]

OMG that whistle

[Amirali1320]

trinidad! yea.... jus cous i saw the license plate

[Diminish420]

my rx7 on 18 psi would make over 800 crank hp and around 730 rwhp its a 351w v8 i would stroke the motor too

[tableoftisch]

excuse me... i have to go change my pants. ill be back to watch again soon :)

[openshot]

hoping one day mine will make that much horse power. what trany can bolt on the 20B

[rotarycorvette1]

@openshot 13b tranny

[damonlandsdown]

look at the water at 3:20 !! :o lol

[shiftyVL]

Was this built by atkins rotary ?

[joffeloff]

Sounds like it's about to explode every time. Awesome.

[rotarycomptech]

Iam not a hatter you jack ass and i do own 93 fucken FD with a TD06 single turbo and i also had a lame first gen like the lame one on your lame chanal

[rotarycomptech]

only 570 out of a 3 roter and a hugh turbo kinda lame i have seen 640 hp with a 2 roter and a smaller turbo @ 38 PSI

[chelo2181]

@rotarycomptech good for you. stop been a hater because you have neither car so let them be.

[rotaryturbo88]

@rotarycomptech yeah this is only 17psi, 38psi is a hell of a lot, think if this was at 38psi my guess would be 800-1000whp

[shadowscreed276]

@rotarycomptech 20B 3 Rotors can push over 1,000rwhp, just because someone isn't pushing that much or hasn't built it to that spec doesn't mean it's lame. He may have it built and tuned to the spec that he wants or needs. For example, if it were used for D1 then he would have a power restriction of 650< hp. You should be ashamed to call yourself a rotary owner, because you act like a kid with a Honda that hates on everything else. So, yes, you are a hater, and you sound like a dumb 17 year old.

[rotarycomptech]

@shadowscreed276 And your a 21 year old know it all punk!

[shadowscreed276]

@rotarycomptech I just call it as I see it, just because I say what it looks or sounds like doesn't mean it is. Don't get so upset about something so small.

[rotarycomptech]

@shadowscreed276 Hey, Iam with you just called it as I saw it. Maybe I shouldn't have used the word lame. Iam not up set but when you accused me of acting like a dumb 17 year old with a honda and a hater kinda got under my skin. I have owned 4 rotarys in my life a rx-4 &1st gen rx-7& a cosmo and I curently own a 93 FD. you got to admit that 570 hp is quite conservative for a turbo charged 3 rotor. You have seen D1 use the 3 rotor? I have only seen the 2 rotor

[Main6935]

Man I love this video. Really need help biulding my 1990 Mazda rx-7 converting it to 20b turbo could really us some help.

[maxybbg]

mad turbo... :O

[bontis101]

ill be honest man, when the turbo spoiled full, i came 3 times

[dylanbaines]

And people say rotories don't make power...

[SoorlandRobi]

1:21 airplane taking off!

[helbigaircraft]

great setup!

[Viking445]

While it was cool as shit to watch is it ok for the turbo to ingest that water at 0:50

[nsfu19]

i dont think the water will hurt the turbo, but imagine if one of those ice pieces would get in the turbo...:P

[sterone]

There is a grille... See at 3:18.

[him89]

I found myself asking this same question.

[jefn36]

holey kamole! that was cool...

[Mach5sun]

This is sick. Love it.

[kumor768]

how much would a 20b swap like that cost?

[DeadlySausage]

plenty.

[pukazero]

@Kumor 768

Between 10-30k... depends on how much you do by urself

[AmemiyaRX8]

I wanna make love to your badass ride!!

[paikmendez]

which FC is that? i am an avid FC fan (and owner). i love the classic shape it has. my dad also has one and wants to buy a second one to have as a project car. i'm telling him to start from the ground up once he buys his rolling platform which'll probably be some time in the near future. i've told him that

[FukU2222]

Thats an FB

[paikmendez]

my mistake! i don't know what i said but i may have been watching another video at the moment i commented. i can't explain how if or how i made the mistake of calling an FB an FC. trust me. i drive an FC. i love it.

[FukU2222]

Haha, no worries. I always do stupid shit like that. I have a T2 myself.

[paikmendez]

u should check out this one vid made by NELSON RACING where they take an FB and put in a fully built 427 twin turbo. it may not be a vid for ture rotorphiles but the engine looks amazing and i think it's the most ludicrous setup i've ever seen.

[rotarydriftdreams]

i saw that one too amazing!!!!...lol but i have a hard in the the grey 3 rotor FC 517 on 10 pounds ?!?! ahhh i love it nelson is a bad ass rotary tuner

[DeadlySausage]

seen that, impressive but us rotomaniacs hate em.

[paikmendez]

awesome. i've seen this video a couple of times but this is the first time i comment on it. i'd like to see it in motion and some highway pulls in different gears just to get an idea of how it behaves as a daily driver. from my perspective, it looks like a great setup.

[rotarydriftdreams]

man when i saw this vid i was like omg no way whos got the balls to put a 3 rotor in a 1st gen this car doesnt weigh anything as it is imagine driving a go kart with close to 600 as far as high way pulls i hope he has drag radials on it and a good driver cause soon as u would put ur foot in it...lol this fucker is snappin quicker sideways quicker than u can say ROTARY POWER!!!!LOL

[CmdrTobs]

I can't believe nobody has said anything about it being white hot at :50 Surely that's not possible?

[makexxx]

That fucker 42R tried to suck me thru my monitor along with that ice lol.

Sick rx7.

[perrymlvr]

ha,ha ,sparky cut ur ass.....

[3dd4ff5]

and with a 120y with 2 sack a cement in d trunk for traction eh boi wat a shame

[spoilboy1]

wen dis happen. any videos to show

[simdes13]

thats a beast rotary 4 life man

[99golfracer]

what kind of relief valve is this running?

[911hustla]

this car sounds like it's almost as powerful as Aaron's skyline

[TRINIROTARY]

ROTARY POWER love it

[463949]

Whats the best time on this car? FOr the mods its got i say it should be able to run a nice 11 flat. High tens? Its 17psi on a 20b so its got lots of power. The owner should try and get the boost even higher if he could. yeah, high tens :)

[911hustla]

i saw this car luach already and i must say this is one demon

[TheMugenboy]

rotary power!!!!!, dam that thing is scarrrry!!

[trinbago01]

datz a BEAST , all u need now is wings 2 fly ROTARY POWER FOREVER love it

[Reddo0000]

Total Respect for this Rx...

[chuckn11]

that is sweettttt

[lovey353]

enuff rev . . . put in on the road now!!!

[dahlpuri1919]

y allur over revving and then changing gear for

[rotor13]

Its on a dyno...

[dahlpuri1919]

sorry i did not know.

[legoRB]

triple rotor shit rocks!!!!!!!!!!!!!

big power toys

[Isaacs352]

That musta been a fun night, countless pulls on the dyno....god dam, and some great closeup footage of the turbo. That shit is priceless.

[stanabay]

in the words of snoop dogg...fo shizzle ma nizzle

[pallymeat]

Thats a great lookin first gen, boost seems like it came on quick and that power curve was beautiful. I'm sure those pulls were on pump gas, that gt42 should start to come alive at higher boost levels than the 17psi they were running. I would love to see what it could do on some race gas.

[hittsman]

dat 20b iz wat ah street port or peri port

[abominableaussieman]

stock ports or street port. A peri port would be shifting gears at 9 or 10k rpm and sound allot meaner.

[krimsonuchiha]

Hell!!!!!!!!!!!!!!!!! now that's a RX7. Nice to see a fellow Trinidian  carrying the RX7 torch

[cedflirt]

wtf damn

[CF3rotor]

Put that thing on the road and lets see what it can do!

[xxftwismymottoxx]

Man that car has to be scary fast. the power to weight ratio is pretty sick. also if anyones children are missing i suggest u look inside that turbo :)

[dumbskillz176]

.....Thats Fucked up. LOL.....in a good way

[carshel1]

make a vid of this car in the street...

[DarqueSock]

is that ice on the intercooler?

[moss014]

i think so lol

[kawana87]

watch a chunk of ice get sucked into the turbo hahaha...

[pistondestroyer]

all i can say is holy balls...my rx-7 would be sucked into that turbo lol

[rx7240z]

Is this car from Trinidad?, I recognize the license plate.

[Tizzik247]

New model gtr's,evo's,subaru's etc...shame mazda doesn't have plans for a 4th gen rx7!!.

[Tizzik247]

nice vid

[rxtony05]

camera man better not get too close... that BIG ASS turbo might suck him in. lol.

[jaydenX3000]

hey man if possible i need you to contact me i've got a few ? about this swap

[MAZMARTinc]

Trinis misbehavin boy! Nice

[ChaddiePaddie]

The tuner Raymond from Barbados is a con artist......he went to grenada and took an rb25det from a local promising to rebuild it, $13000 for alleged parts, and now more than a year later he can't be found....anyone knows his whereabouts contact me...time for this dishonest people to be ridded.

[Stevieb83]

hey sorry 2 trouble u what was this raymond guys surname?

[ChaddiePaddie]

jones

[Stevieb83]

ok not who i thought im from scotland we had a local tuner here going by the name of raymond who was a touch sinister,financially.cheers anyhow m8

[Jhyred]

WoOW

[chelo2181]

hey did you have to cut in the engine bay to get the 3rotor in there??

[rageagainst89]

love the turbo scream 80

[OMR70]

Any engine bay pics? Just wanna know how tight of a fit it is in there even with the turbo

[therealpodge]

Holy god.....It sounds like a bloody 747 taking off,also its the first time ive seen W/I. Well done lads ☺☺☺

[sailentshadow]

That. Is. Freaking. Sikk.

You'd think with a gt42r on a 20b, he'd be pushing more than that... my friend had a bridge ported(298hp @ 3psi) with a GT35R, he was pushing right around the same amount...

think of having a 20b, though... even though they're 10-15,000 projects... XD (If you want it entirely hooked up like this one)

[xxGAMRxx]

why do they run such bigwhen they use such low boost?

[Musclefella]

Cool vid ;). awesome power. Nice to see the water injection working....

[Deetroiter]

violent!

[Twinturbo120]

that sounds fucking delicious

[shamanking1234567]

dude nice job with the engine it sounds great

[potzahasee01]

wow that is just a God of a 1st gen! did not think the 20b's would fit in one... guess i was wrong, now I got to go get one for my 85 Rx7 lol good vid thank for putting it up.

[BMWM5S62]

Nice Car!

[schttemp]

WOOOOW!!!!!

[SinisterAudio]

^thanks man ;)

[bencouturier1]

One of the best vids ive ever seen, Rotary Power!

[negautrunks]

holy shit

[dukedub]

mazda makes a 747 jet ????

[SinisterAudio]

y 93 octane?

its c16 theyre using

actually i think its c20

[driftslave]

I wonder if that thing can make 550whp with a filter and 93 octane?

[cherryredrxse7en]

Nice...

[maserati1897]

nice work as always man

[SinisterAudio]

thnx

[nitrousboy0311]

very nice