Is a 1969 z 50 street legal and I was thinking about buying a frame and building it with parts is it cheaper or more expensive instead of buying a whole bike
my freind got a z50 its a 1973 i think and we are trying to rebuild it for a project bike, it wasnt started for a year and its got no compression. We have it down to the piston but cant get the damn pin out. I think its needs new rings but the cylinder looks fine. the piston looks pretty dark though.
my freind got a z50 its a 1973 i think and we are trying to rebuild it for a project bike, it wasnt started for a year and its got no compression. We have it down to the piston but cant get the damn pin out. I think its needs new rings but the cylinder looks fine. the valve looks pretty dark though.
its a 84 200cc atc we tuook that motor out and made it really light from cutting alot of the ecxcess metal so i think it will run well but the problem is finding the correst sprocket do you know where i can get one
I dont know then, use a #41 clutch, then run a chain to a jack shaft and on that jack shaft have a correct sprocket on there, i dont know where you can get the sprocket, i highly recomend not using a 3.5hp briggs, i would use a cr500 engine or some giant motorcycle engine. but thats just my opinion
is it a atc70 or atc90? a #41/#42 clutch will work, i have used the chain from my atc90 and it worked with a #41 clutch, but the rear axle would be to small unless you got a jack shaft or torq-a-verter. I highly suggest you just buy a motor made for the trike as to a briggs wont be stong enough and its only one speed.
Wath is the year of the green z 50?
MrLeirbag1996 1 month ago
Wath is the years of the gree z 50?
MrLeirbag1996 1 month ago
Is a 1969 z 50 street legal and I was thinking about buying a frame and building it with parts is it cheaper or more expensive instead of buying a whole bike
Gokartdrifter1 1 month ago
btw, don't give that manny gas when they start up! :o
&when they are cold be gentle for em! :p
verlindeke 1 month ago
u got a complete motor left?
YamahaYG5S 6 months ago
I got wun u need sume front forks
Cmey3444 7 months ago
how much call me 9518011425 sam
smousa1000 8 months ago
I just got one off cl for $40.00, ran when parked. where do you find parts at
dusty1999 10 months ago
Do you have any left? Running or not.
Thanks
Laxbro37 11 months ago
@Laxbro37
nope.
KartRacer695 11 months ago
how many total vehecles do you have?
gaspowerrules 1 year ago
my freind got a z50 its a 1973 i think and we are trying to rebuild it for a project bike, it wasnt started for a year and its got no compression. We have it down to the piston but cant get the damn pin out. I think its needs new rings but the cylinder looks fine. the piston looks pretty dark though.
MrCrf230f 1 year ago
my freind got a z50 its a 1973 i think and we are trying to rebuild it for a project bike, it wasnt started for a year and its got no compression. We have it down to the piston but cant get the damn pin out. I think its needs new rings but the cylinder looks fine. the valve looks pretty dark though.
MrCrf230f 1 year ago
your dad made u purchace it from him is he mr crabs or something
fgrules777 1 year ago
how much should i sell mine
rm125rid3r 1 year ago
@rm125rid3r
This is for the hard tail model
Parts Bike= $200 - $300
Parked When Running= $450
Decent Working Condition= $600
Show Room Condition = $2,500 - $5,000
No these prices are NOT exaggerated,
thanks for watching.
KartRacer695 1 year ago
@KartRacer695 and this can go way higher in Europe...
sheepopower 1 year ago
@KartRacer695 $5.000 are you insane in the USA?
Over here you get one for 2.100 dollars which is about 1.600 euro's
Chrisuu 1 year ago
awe ok then, i see that your a good boy, yea they are nice though
DarkSkysify 1 year ago
are you spoiled or something, damn thats too much bikes
DarkSkysify 1 year ago
@DarkSkysify
not spoiled, theres all my dads bikes, and i had to buy one from him.
thanks for watching.
KartRacer695 1 year ago
Wow, i only have one and it doesnt even run.
Drummerkid461995 1 year ago
This has been flagged as spam show
nice bikes. looks like a mini version of my st90 garage
stonedimaculate1983 1 year ago
nice bikes. looks like a mini version of my st90 garage
stonedimaculate1983 1 year ago
how much fkn bikes do u have
MrBanana12341 1 year ago
@MrBanana12341
I really couldnt tell you, theres way more than you can see lol. thanks for watching.
KartRacer695 1 year ago
looking for front fender and headlight for 1976 z50
SuperHardtail 2 years ago
its a 84 200cc atc we tuook that motor out and made it really light from cutting alot of the ecxcess metal so i think it will run well but the problem is finding the correst sprocket do you know where i can get one
flip46 2 years ago
I dont know then, use a #41 clutch, then run a chain to a jack shaft and on that jack shaft have a correct sprocket on there, i dont know where you can get the sprocket, i highly recomend not using a 3.5hp briggs, i would use a cr500 engine or some giant motorcycle engine. but thats just my opinion
KartRacer695 2 years ago
i have a briggs 3.5 hp motor that im putting in a 84 atc do you know where i can get a sprocket that will fit the chain for the motor
flip46 2 years ago
is it a atc70 or atc90? a #41/#42 clutch will work, i have used the chain from my atc90 and it worked with a #41 clutch, but the rear axle would be to small unless you got a jack shaft or torq-a-verter. I highly suggest you just buy a motor made for the trike as to a briggs wont be stong enough and its only one speed.
KartRacer695 2 years ago
what's the difference between a honda
Z50s and a honda Z50 a??
MRredband 2 years ago
the model.
KartRacer695 2 years ago
how much
musician1232 2 years ago
about 250$-300$
KartRacer695 2 years ago
where are you out of? i might buy
8nguy 2 years ago
bristish columbia in canada.
KartRacer695 2 years ago
Where at in BC? I am down in Portland. Which ones ya got left? Do you have a list with prices? That would be cool. Thanks!
novarob1967 2 years ago
nothing is for sale anymore as to things have changed.
KartRacer695 2 years ago
first one needs rings but awsome bikes bro would you sell me one of the ones that are not running as long as it is complete?
vaca129 2 years ago
yup there are some for sale
KartRacer695 2 years ago
i know you have to ask your dad and everything but is there anyway you could ask him for a price on one for me? only thing is it must be complete.
vaca129 2 years ago
ok, i asked him and all he said was 900$ for the yellow one with the head light and he said or best offer.
KartRacer695 2 years ago
just 7 more to go, how much for 2 tanks? im in ab, not to far from bc....
mechanicojoe 2 years ago