it's the same thing painting it in the inside right? (opening it and painting it inside) instead of the outside like you did? and basically it's layered? you didn't paint it more than once to get it that black?
Hey i have a question for you guys, I drive a 2010 scion xb with Black Halo LED Projector Headlights with 10k HID, and I was wondering should i use nightshade to black them out more or should i just keep them the same?
hey bud..need help lol, I asked the reverse light area and now after finishing the painting I kinda ended up leaving it masked for 2 days and now after removing the tape there is this real bad residue left and stuck on the light : ( ..
Have tried windex, bug/grime remover, goo off and lastly a hair drier to maybe help with the glue but the glue ain't coming off : ( can you suggest or do you know what I could do or try?
I used the same spray on my FTO's tail lights and it looked like shit,i had to remove it with paint thinner.You cant see it with the lights off,but when you turn lights on you can see light bubbles and shit.
I used it the wrong way maybe,because your looks amazing.
@tylerskyline Get VHT brand. You can buy it from advance auto parts or o'reilys. It's called nite-shades. Two coats and your set. No bubbles, high gloss, the shit!
@noveron714 yeah it looks like good taping but did you paint that outside? i see some dust marks on some parts. better to do it in a garage with good air flow and filters. . but damn nice taping
you can buy this shit at meijer its like 7 buck a can and one can will do about three cars and it works great ive had it on my car for about a year now and theres no chiping peeling or any thing like that
4. spay 1 st cost light and wait like 10 min then do second cost as much as u want get darker.
5.if u see it dull or fogge so dont worry spray 1 or 2 cost close like a finger and you will see grosy. or you wanna more shine so one cost of clear but spray far alittle bit take off tape you will have nice custom light you want you can also make EYELID too .sorry my BROKEN ENGLISH
in case of anything could you remove it ?
818CALIBEAR 2 months ago
Can You Control How Dark It Is iDont Want Mines To Be That Dark Becausee iHave A Silver Grey G Coupe.
dyerkhalim123 3 months ago
That would look hella sick on a black or grey g35
1993myyear 5 months ago
If you peel the tape while the paint is still wet, it will have a smoother edge. After the paint dries on the tape, it will peel off unevenly.
PBScenarioScene 7 months ago
looks good
thunderup86 9 months ago
looks super clean
chrisdunc21 10 months ago
chink
thelampwithbreasts 10 months ago
UMM, DONE WRONG. (SEE NO MESSY) LOL.
mcgmarine 10 months ago
did you sand the parts you masked off with the tape?
MegaBigFootBoner 11 months ago
it's the same thing painting it in the inside right? (opening it and painting it inside) instead of the outside like you did? and basically it's layered? you didn't paint it more than once to get it that black?
pinoyALLmotorEVOIXMR 11 months ago
Hey i have a question for you guys, I drive a 2010 scion xb with Black Halo LED Projector Headlights with 10k HID, and I was wondering should i use nightshade to black them out more or should i just keep them the same?
Zafo16 1 year ago
Where can you buy the spray for the tails. Great job it looks pimpin
XxXTremeEnigmaXxX 1 year ago
Nice!
IrishChris1979 1 year ago
i did the same thing on my galant.. but how do i get a nice glossy look like yours? ive heard of maybe polishing it lightly, thx and looks sexy
Nightneo2000 1 year ago
nice work...in italy is illegal =(
Marco88pironato 1 year ago
was that electrical tape you used to make the lines that clean??
smokeymcpots0420 1 year ago
Where did yuh get the paint
Miguelkenia6910 1 year ago
Thumbs up if you think this guys a douchebag for holding the camera that way.
check out 0:56
romanknight6 1 year ago
hey bud..need help lol, I asked the reverse light area and now after finishing the painting I kinda ended up leaving it masked for 2 days and now after removing the tape there is this real bad residue left and stuck on the light : ( ..
Have tried windex, bug/grime remover, goo off and lastly a hair drier to maybe help with the glue but the glue ain't coming off : ( can you suggest or do you know what I could do or try?
rags17 1 year ago
yes sand the light make spray paint stays stronger no cheap off later
tylerskyline 1 year ago
do you have to sand the light, and why
abhele16 1 year ago
@abhele16 so the paint has something to grab on to
perez2a 1 year ago
thats some clean ass work pimp!
EpikKustumz 1 year ago
no bobbles at all if yes that its not normal
tylerskyline 1 year ago
Damn browski nice job
Traxxas1992 1 year ago
That looks good....But i saw alot of bubbles...Is that normal?
crazyportorock07 1 year ago
damn g u got down u didnt have 2 do nuthin jus spray it?????
raidaker18 1 year ago
how do u remove it, the paint?
clariceave 1 year ago
I used the same spray on my FTO's tail lights and it looked like shit,i had to remove it with paint thinner.You cant see it with the lights off,but when you turn lights on you can see light bubbles and shit.
I used it the wrong way maybe,because your looks amazing.
UltrakupraRebirth 1 year ago
whats that chinese shit ive used VHT niteshades but it only comes in black i keep seein this chinese shit everywhere in all colours
Lambo0225 1 year ago
the whole headlight yu sand before tinting it and go easy on it dont scratch it that bad just slightly
51sckay 1 year ago
Damn that looks really sweet ! Did it keep shining like that ?
Egeuzun 1 year ago
damn that looks fucking good man
where did you buy the smoke tint can please get back at me i wanna get one
noveron714 1 year ago
@noveron714 E-Tech do a range of tints, if you get the smoke tint and add layers it turns black.
joosh1992 1 year ago
@noveron714 more layer it will turn Black im in OC , CA 92703 YOU CAN GETS IT FROM EBAY
tylerskyline 1 year ago
@tylerskyline Get VHT brand. You can buy it from advance auto parts or o'reilys. It's called nite-shades. Two coats and your set. No bubbles, high gloss, the shit!
MrViperbyte13 6 months ago
@noveron714 yeah it looks like good taping but did you paint that outside? i see some dust marks on some parts. better to do it in a garage with good air flow and filters. . but damn nice taping
612ZtoMhS 1 year ago
where did you buy the smoke tint can
noveron714 1 year ago
came out clean
CantBeTouched91 1 year ago
you can buy this shit at meijer its like 7 buck a can and one can will do about three cars and it works great ive had it on my car for about a year now and theres no chiping peeling or any thing like that
andrew0901280 2 years ago
so is this spray better than nightshade? or????
bass1134 2 years ago
hey where did u buy the fucking spray catemet
TheCHORIZERO 2 years ago
1 . clean the light
2. sand the light using sand paper with water
3. use skinny tape to make cicle or round
4. spay 1 st cost light and wait like 10 min then do second cost as much as u want get darker.
5.if u see it dull or fogge so dont worry spray 1 or 2 cost close like a finger and you will see grosy. or you wanna more shine so one cost of clear but spray far alittle bit take off tape you will have nice custom light you want you can also make EYELID too .sorry my BROKEN ENGLISH
tylerskyline 2 years ago 12
hey bro wat king of sand paper did u used?
u did a real good job.
taggo1 2 years ago
@tylerskyline when you sand the headlights, do you sand the entire thing or just the part you are tinting?
maxp8ntballer 1 year ago
@maxp8ntballer sand just area you want to pant only
tylerskyline 1 year ago
@tylerskyline k. and do you clearcoat the whole thing or just the part you painted
maxp8ntballer 1 year ago
@tylerskyline yea I did sand my light with water but it scratched the shit out of my light.
olverafam 1 year ago
@tylerskyline sick man thanks im gunna do this on my chev silverado tt
krampp24 5 months ago
04 TAIL LIGHT man its easy not big deal ok ! ill have you out!!
read carefully ok!
you can get the tape make cicle in pepboys or autozone
you know like some car the make the line from fender to tail really THIN line ok
you take that tape and make cicle when you make it youll see in side the light has cicle already so jaust follow that GET IT SORRY MY ESL
tylerskyline 2 years ago
yo bro where can I get this SPRAY PAINT ....
Plz get back at me
ANTIKILLER101 2 years ago
yo where can i find that spray? help me please
jewISHLoteK 2 years ago
you got too many dust particles. you need to wetsand them
ondarun134 2 years ago
looks great bro!
AeroxRacer18 2 years ago
that shit's fresh yo.. nice work
silntinsnty 2 years ago
and i was jus looking at that paint...hahah i might buy it.
oaklandsmost 2 years ago
great job bro
EvoSinIX 2 years ago
nice
cmonskippy 2 years ago
fuck'n mint mate
BIGDave411 2 years ago
i have an 07 G35 COUPE u can do it on 05
tylerskyline 3 years ago
omg thats soooooooooo sexy
TheChaldean 3 years ago
at autpart or on ebay. u should get paper sand 2000 or 2500 which is make paint last longer i prefer u get clear cost too make shining.
tylerskyline 3 years ago
Hi can u please tell me where I can get the Paint ? it's look great on your Lights, I want my G35 same like yours.Great Clip
tldkny 3 years ago