cnc QT200

[shitbagster]

A shiny turd is still a turd

[cixbull]

mazak is the best

[03clipse]

I work with a Nexus QT 250. Just had a ? I use Surfcam Velocity 4 and also Mazatrol at the machine depending on the part. Mproblem is when I use a mcode befor and after the cut off for the partcatcher it will come up befor the previous tool goes to change point. This is a fast machine with quick spindle ramp up and down. the turret is easy to get straight after a crash.

[lugiodrummer]

mazak power :-)))

[ydna2]

I love machining brass...

[trein45]

Interesting,

I like this kind becuase, you see what one machine can do.

Can you post more of these kind of movies of CNC-machines of are there already a lot of thes on this website?

[citycerritos]

how hard is it to be a master at as a cnc programmer and how much do they usually make annually? anyone know?

[telle80]

Well, it depends but you can make a lot of money if you own the machine yourself. I bought a CNC - mill one year ago and there is much to learn. You just can't buy a machine and then think that you can operate it straight away, no chance. Before I bought my machine I also learned CAD/CAM for one year and that's the tricky part. If you master CAD/CAM fully then you can manufacture whatever you want.

[telle80]

Here in Sweden a cnc programmer makes about 2500 - 3000 euro (each month) I would belive. But if you have your own company you could make much more.

[GJCIDS]

brass isn't that cheap.. believe me.. probably just for presentation cause it mostly shine beautiful without cooling and gives a beautiful sight..

[joeygonzo]

Brass is cheap.

[JTMarlin8]

Nah, A36, 1018 and 6061 are cheap.

By volume, 360 brass is about 4-5 times as expensive as 6061. Similar in price to alloy and tool steels.

Cheap compared to Ti, Inco, etc, sure.

[sleeper142]

because we cant all be as ignorant as you.

[trein45]

THAT'S CORRECT!!!!!

[mightyOmouse]

three parts from one diameter?! what a waste of money, as i know brass is pretty expensive. i hope this is only a presentation video.

[JTMarlin8]

Of course it's only a presentation video.

Besides, depending on the situation, money can be saved by using the same diameter stock for multiple parts. For example:

1. Small quantity run, save money on spindle liners that you'd have to buy for odd sized bars.

2. Small quantity run, same price/cheaper to buy a long length of one diameter than multiple short lengths.

3. The material is cheap- 1018, 6061, etc.

[cixbull]

das ist rotguss. keine kühlung nötig und null werkzeugverschleiss. genial.

[phaxen]

sieht eher nach Neusilber aus

[Jayron2k7]

Rein vom Optischem, ohne kühlung und dem vorschub denk ich an Rotguss das Verarbeite ich auch zum Teil..

[Alicecooper1357]

I don't get to play with turning centers until my second year of Tech School

[DifferentLinke]

Because if you crash a cnc lathe no matter how minor the crash will be, it will cost a bit to fix it. I did not use the cnc lathe until my second year of tech school also. e had to run 3 simulations and have it approved by the proffesor before we ran the part.

[ixe87]

Sowas geht doch nur mit Alu, Messing o.ä. Ohne Kühlung und so schnell. Na gut, toll zu anschauen aber wo bleibt da das gewisse etwas? Solche Programme macht jeder Zerspanerlehrling spätestens im 2. Lehrjahr aus dem FF ;) trotzdem schön gemachtes Video

[jerrekeflyboy]

i work whit those machines

[Manuelprodigy]

Blessed that you have this luck

[pitol47]

wyjebisty sprzęt

[walikai]

damn i wish i had one

[performz28]

Very fast...but the only materials that can be machined at that speed/feedrate are aluminum and light materials. But I like the actual speed of the machine itself to change tools. Very Nice.

[ALoNeMaNxTR]

bravo

[3Stalker3]

oh mio dio è fantastico

[priestsiege]

harika

[tony2444]

PENDEJADA

[ego602]

machining is so slow

[fusionstar916]

its actually fast... but... yes slower the more precision..

[jhonatthan1002]

sin duda lo mejor porfa pueden poner mas videos de centros mecanizados gracias ;)xD

[ergungunal]

süper

[Zeynelsagir]

vdf-böhringer ist the best