Mul-T-Lock

[SBeyond20]

wow im having problems with getting my motorcycle started again with regular locks,i would die if i had lost the key and had one of those locks

[xXxDarkDepressionxXx]

My boss and her husband recently put locks like this on a lot of their businesses, not sure if it's the same brand.

They are cool though cause one key unlocks 2 places just by putting it in facing a different direction.

[Spelunker0211]

This lock is an end of the world lock. All I need now is that instrument they use to kill cattle to just blow the cylinder out..

[Megablaze9292]

I just love this epic music of MT5

[ShamKProductions]

to pick this, search "Picking a Mul-T-Lock (pin-in-pin) padlock" by user sneekypeeks.

[mdinc20]

if i was a burglar i would put jb weld in that just to piss off the owner

[bipinformprotect]

Use a hammer, get what you can carry and run as hell !

[bipinformprotect]

The easiest way to open it is to lie to Chuck Norris that there is a cake on the other side of the door.

[livefreeinuk1]

How do get get my chik out of these hand cuffs, her dad coming home soon

[shazzieex]

hehehe i have that lock in my house :L

[1fenech]

my university house door has won its got 4pins each with pins in them that alpha pin but this one is on you hand side of the pins and the 1st pin has a pin within a pin within a pin. and the keys a really thin. you need really specialist tools to get into one of those

[MCneun]

FUCKING SHIT

[airplane2142]

yeah i got just the tool to pick that... C-4 haha yep if i tryed to pick that i think i would just get mad and bust the door down.

[jonny71c123]

can these cylinders be snaped or even bumped

[mellowb1rd]

@jonny71c123 Yeah, they can be bumped. There's a video on here showing it. I don't come across these locks much. 'Round here, they only put them on handicapped toilets for some reason. I guess a public toilet that's guaranteed to be clean is worth protecting

[jonny71c123]

@mellowb1rd Thanks for the reply mate, i have a mul t lock garrison break secure on my doors and was thinking of upgrading to the mt5+ as im sick of seeing people bump and pick them, back to the drawing board to find something alot more safe

[jonny71c123]

@mellowb1rd If you can find the link to the mul t lock mt5+ being bumped can you please send me it as i can't seem to find it on you tube

[uksteve1966]

why bother bumpimng or picking when it is so easy to snap these?

[jonny71c123]

@uksteve1966 thats why i had the garrison breaksecure fitted but they can be bumped quite easy so im looking for a bump proof cylinder and cant afford the abloy protec may have to use the evva 3ks instead but really wanted the mt5+

[uksteve1966]

@jonny71c123 they can be snapped easily too!

[jonny71c123]

@uksteve1966 Think I will just replace my upvc doors with a wooden one and a decent mortice lock they cant be bumped or snaped a lot safer than the cylinder locks

[BringEllisTheHoriZon]

@jonny71c123 mortice locks can be picked easily though by people who know how, but yeah, the picks and tension tools cost a hell of a lot more

[5O1Bazzar]

FUCK, dont think even i can pick lock that thing

[BabyJLE]

Every burglars nightmare

[CPTNmalinko666V2]

if i ever saw one of those id just get a sledge hammer and a rail spike and break that fucker out

[guy377565]

if i saw one of these things, id just say, "eff it" and kick down the door.

[Megablaze9292]

My dad bought a Mul-T-Lock machine about a decade ago in the 90's and it cost $6,000.00

Screw up one part of the key there goes about $10 you could've earn for the service.

[762full]

Is this better than the EVVA 3KS?

[ATOMICWATERSTUDIOS]

any thing can be picked som times but only with explosoves!!!

[dabbs327]

This entire lock-line CANNOT be picked or easily drilled

[Megablaze9292]

@dabbs327

The Mul-T-Lock has advance cylinders and higher security.

[SpiningChocolate]

1, Crowbar

2, Hammer

3, Gun

4, Grenade

5, Missile

6, nuclear

7, leave it alone..

most people would choose 7..

but i would just go in from another door or a window...

[naxps]

8O wow.

[Th3R4nd0mGuy]

easy! stick a paper clip onto a hammer and then strike at it

[spindoctor416]

finally !!! jsut what i need to put on my daughter's chastity belt !!!

[mawkheaf]

looks hard to pick

[tjpem72]

il have a go i havent bean beaten yet ?

[flameboys009]

man i had this lock at the house i was alionokillerato16

now i ...

[justin1234go]

i wonder how it cost

[MapleLeafConfederacy]

when i start seeing that on doors ill just use the window?? fuckers

[thecraftyc474]

Hey can som one tell my from where can i buy this key :D

[bulgariaisnomberone]

If the lock is mechanical there is always a way to unlock it without the original key.

[mikr0bas]

i wonder how much would cost to make a replica of that key if you loose it..

[HiNtZzZ]

Love the design of this lock. Waiting for prices to drop so I can cut one away! I think MTL should have ditched the old telescoping pin design since it is flawed....... either get rid, or give the inner pins their own independent spring system. A nice lock though, can't wait to get one :D

[REAPER49R]

That's just Evil. >:D I Want It. xD

[freakman420]

holy shit....

[clyse88]

thats insane, damn,

[kosmosleha]

wow life is getting more and more complicated for the thievs

[fordmoparguy]

saw za around the lock until you can pull the whole thing out with it still locked

[jkthecjer]

Impossible?

Like Medecos m3, this new design's purpose is to extend the company's patent(MTL Interactive is almost run out). Alpha spring is a joke that will be easy to bypass as an Everest check pin. Telescoping pins are difficult to pick without special tools(like H&Ms) but have been picked many many times. The new feature is the springless slider sidebar. This is a direct ripoff of Scorpion's CX-5. It seems the sliders are not serrated thus I doubt the new MT5 sidebar will be difficult.

[wizwazzle]

i am battling the CX5 now...any tips for picking the sliders?

[jkthecjer]

I wish I had some tips for the CX-5; I have yet to get my hands on one. Where did you pick yours up?

[wizwazzle]

mine was a gift/challenge...lucky for me the padlock was open,so i was able to drop the core out. unfortunately,there is no key to guide me,

but the bible has screw caps so i can remove the pinstacks and try the side bar alone.

[jkthecjer]

if you want to have a closer look at the sidebar/slider, you can probably remove all of the pin stacks and slide the plug right out of the front of the shell. From there, everything should be accessible. However, be careful because the sliders may try to drop out on you (springless but still).

[wizwazzle]

wow, i had'nt considered that.

great idea.....assuming it has a slot,similar to the Bilock.

thanks.

[Jc3intelligent]

2 words: cordless drill

[blauwepiet]

the worst part is that i see high security locks like this and that you can just break them out of the door XD

[HiNtZzZ]

Only if it's a crappy euro cylinder. You'd have a job to snap out an oval or rim cylinder ;)

[swanny812]

thats cool ill vs it with a brick

[Jc3intelligent]

call me paranoid.WHO THE F*CK WOULD NEED TO BUY A MUL-T-LOCK??? LET ALONE THIS ONE???

[LockHoodlum]

Right... and who's going to pick this b*stard?

[krackannv]

my god that would be imposible to pick!

[lokpikr999]

Oh I just remembered.You think this is high security?Check out Mul-T-Lock CLIQ!

[milionaru89]

i think we (a locksmith, somebody with imagination and skils) could build a device that could open it, i only think it`s complicated because there are many elements in a small space anyway i don`t think it could be opent by usual techniques if the lock is cheap enough i will buy one and give it a try:D

[ky4fox]

Thermite beats all!

[milionaru89]

we are talking about picking the lock not blowing it up. however if it absoultly necesary anything goes:D

[bobbycross123456]

thermite is not a blasting agent it melts through stuff....i produces a stream of liquid hot iron....i think it would work

[milionaru89]

yes you are right, but "picking" a lock with thermite is not really picking:))

[Arkard0]

Besides the fact that lock picking as a hobby is a NONE! destructive way of getting the lock open without the correct key.

[GUNSIMON0077]

bobbycross123456 there is nano thermite that does explode!!!

[MagicMushroomPins]

You're welcome to break into my house if you can get hold of some thermite from the thermite store, you're totally missing the point, might as well say "nuke the door. That lock is crap against nukes."

pm me when you have the thermite and i will give you my address

[somnusultimo]

Want me to tell you how to make it?

[OdayJuarez]

I hate it when they duct tape locking mechanisms together. It's a sidebar laser track lock with a Mul-T-Lock slapped on it. Divide the lock into it's individual sections and address them one at a time with decoders and variable keys.

[4u2nvmj]

PICK THAT!!!!!!!!!!!!!!!lmao

[saneskateam16]

try lock picking that!

[ChipShuhart]

that thing is ridiculous

[Slimpickingsooooo]

thats is freaking sick!!! I would love to have one of these. .. dam now thats high security.. makes medeco look like master lock..

[babot6]

the only problems are price, availability and well... so many things can go rong and by the way, i went to japan on a school trip and bought a 400$ magnetic lock that instead of having a key with "valleys and mountains" is flat and has different strenght magnets that push up tumblers and make no contact together, and to prevent conventional lock picking it has a thin sheet of aluminun between the to it is wut u call sick

[lokpikr999]

Who would pay 400 DOLLARS for a lock!?!!!???

[babot6]

i won it in a bet to pick another lock

[DutchSmartAss]

That looks very inpressive even attempting to pick that would drive me crazy

[sniperpredator123456]

how the fuck would u go about pickin that dam thing?

[tmaxx258]

i dont know but i think it can be picked

[etanderson]

It would take so many different tools! Those pins underneath are delicate looking and have a vertical movement axis. Those pins on top don't look as delicate but they have to move horizontally! Then there's that final "spring" thing at the end of the lock that must have to be pushed with just the right pressure.... seems like too many variables to pick.

[Jc3intelligent]

there's something out there called the peterson pick tool. (or something like that)it's big, heavy and expensive as hell.

[FartingPenguinProd]

@tmaxx258 haha it can easily be done

[lokpikr999]

Here is my Idea:Make a pick like the L ward

key,but a little bit longer out of a stainless

steel butter knife(like wizwazzle makes his picks)and insert it sideway to pick the pins,then use a needle pick(like the one seen in a Schlage wafer pickset}to depress the alpha spring,and last put your tension wrench

on either the left or right side of the keyway{depending on which way it opens}with the handle facing upwards.But hey,thats just my theory.

[lokpikr999]

Here is my idea:Make a pick out of a stainless

steel butter butter knife in the shape an L ward pick{But making the stem twice as long}to pick the bottom pins,then use a needle pick{like the one found in a Schlage wafer pick set}to push in the alpha spring.Use a standard or twist-flex tension wrench on either side of the flat keyway(depending in which direction the lock opens}

[pyro872005]

@sniperpredator123456 Pick it with your boot.

[baccus61]

@sniperpredator123456 Just use a slide hammer and screw it into the lock and rip the bugger right out. Just like the thieves do in 2 seconds flat.

[th55]

Awesome. It is fun to watch the pins move.