I heard if you add baking soda or salt on the water to get the HHO will make it corrosive to the aluminum parts in the intake system exposed .is this right???
ITS AMAZING HOW MANY IDIOTS DO NOTHING BUT BITCH!!!!
HEY GUYS TAKE YOUR MIDOLS AND LET THE KID WORK!!!!!
GREAT WORK GUY, MANY STARTED LIKE YOU DOING EXPERIMENTS AND SEE HOW THINGS WORK, BABY STEPS. PUT A BIT OF BAKING SODA, SEE WHAT HAPPENS. AND DONT INHALE THE GAS, POISON.
Stored Hydrogen with it's Oxygen counter part in a 200 psi container is not Diesel, it DOESN"T explode under pressure. Propane is VERY volatile yet it is stored in a pressure tank along with its Oxygen and no one says anything about it. Puncture a propane tank with a spark present and BOOM, same conditions as Hydrogen. Just put safety release valves on the tank to bleed it out in a second or two under emergency conditions, route it away from any sensitive human area.
technically city tap water does have some electrolytes in it with all the chemicals they use to purify and ingredients they add to it "For Our Health". all in all city tap water has a lot of impurity's in it. use rain water for another experiment and see if there isn't a difference. thanks for the wonderful video.
For EvanSeidl1 , ' it is impossible to have anything running at 100% efficiency. ' Really? Sorry dude but I always work at 110% efficiency! I'm just that good at my job! LMFAO! I don't remember if he ever ran on water but I once heard of this guy that could walk on it! lol Anyway... back to the video... :)
@truthseeka1 im sure you have some sort of website that proves us wrong hmm? because theres are tons of website that proves us right. this proccess can be done with a 9v battery and what it produces off of a 9vbattery some water and bakingsoda is more energy then that 9v battery. id call that eficient if you ask me. weither its 100% efficient thats a different story. maybe you should do YOUR homework before trolling on science that will one day take over the oil industry.
@SeanofZeus HMMMMMM Talk about doing YOUR homework. Baking soda used in electrolysis is a no no, the same goes for salt. (TOXIC)...... As for gaining more energy than the 9 volt battery has, sounds like over unity crap. I suppose you believe in santa claus as well........ Man stop sniffing that HHO. ELECTROLYSIS IS NOT EFFICIENT.
@truthseeka1 ha if you dissin HHO then why are you watching these vids. electrolisis itself isnt toxic, its the byproduct that is. and can be easily disposed of at your local hazardous waste facility in your city. or you can do a little bit of research and figure out how to neutralize the toxic material by your self. im talking about hexavalent chromium of course. tell me why salt and Bi-carb are toxic huu? the stainless steel plates produce hexavalent chromuim. salt or bi-carb help? i dont know
@SeanofZeus I'm not going to go to far into your question. Salt in electrolysis produces chlorine. Bi carb gives off carbon dioxide, carbon monoxide, the electrolyte solution becomes a corrosive alkaline. Breathe enough of any of these gases and you'll know about it. Anyway time for you to do some homework.
How much frikking current is that thing pulling to get 2litres per minute? How about you really shock us all and produce 2litres per minute with only a small amount of current (milliamps please). ANYONE can whip out their welder and rig it up to some stainless steel plates and water and get HHO.
I must make the correction that it is impossible to have anything running at 100% efficiency. Work in=work out is the definition of a 100% efficient system, by nature an electrical system is very inefficient. If you ever start trying to sell this DO NOT call it 100% efficient because it is impossible, by the laws of the universe. Also do some research as to how long the water will be able to produce hydrogen and at what rate, you may be surprised...in a bad way : /
Until people are posting videos showing 20 or 200 litres a minute, they are wasting everyone's time. 12V "high" is probably 14.4V and running from the mains at 200A, your gas output is pathetic.
Nice work bro! I started gathering supplies to build my own hydrogen cell under the hood of my car. The only thing i'm not confident in is how to prevent a backfire between H & O flowing from the bubbler to the intake. What can I use that does not need modification? Oxygen Acetaline backflow arresters require hundreds of pounds of force. What doesn't?
Make your own arrester i used a plastic conduit pipe with barb connecters on each end and filled it with bronze wool just make sure it is air tight someone on you tube already has a vid on this look it up...good luck
Man you can use a one way valve from a welder's set or butane torch and hook it up to the end of your bubbler 100% gaurantee it wont backfire you can even test it yourself.
I can guarantee you this did not perform at 100% efficiency. The only way you can achieve 100% is by calculating it and not accounting for any variables or just making numbers up. Is this how you got 100% efficiency, on paper? We already know that HHO perpetual motion cars are a fraud and the Mythbusters even backed up the math we already saw with actual tests. Why are people still trying to rip themselves off? Perhaps I'm in the wrong industry if people are actually willing to be conned.
Your bubbles are very small. My 21 plate 6 by 6 inch plate dry cell produces 5lmp at 50 amps. Mine would smoke yours any day. Dry cells are definitely the way to go if you want good output and performance.
Great idea. what if you used the gas tank of the dodge to use as the container, and tried to raise the fuel injectors up to just grab the Hho? would that be enough to power a car. also i would also like to know how many amps your pulling, if its enough to run off of a couple of car batteries then you might just be able to power a car. keep us posted on your findings.
HHO generation using a lot of amps is pointless. This is brute force electrolysis... One must be able to run a car only with HHO using no more than 5A.
I'm not knocking your video I think its great. But what is up with the brown bubbly tap water?
It reminds me of what the toxic avenger fell into. But seriously good work and if you use HHO on a carbed vehicle I would just turn down the Air/fuel screw a turn. But that is if you can get enough HHO in there to replace the missing fuel.
The brown water is the chemical effect from the electrolysis process. See in city water they add chlorine and other chemicals to keep the water clean. When you split the covalent bonds in water ( what holds the hydrogen and oxygen together). You also break hydrogen bonds (holds water molecules together) the chemicals are freed in the water. That's where the term browns gas might of appeared from.
LMAO no Brown's gas comes from a guy named BROWN. You are partially correct on the mud your getting in your water, some of it comes from the water, the rest comes from the iron in the stainless. It's called iron oxide. It appears to me you have made a very efficient water heater.
What about Klein's gas. Klein discovered the new magical gas called Klein's gas back in [I don't really care when]. After that the self proclaimed Dr. Brown (the one and only graduate of the college he and a friend founded) invented HHO. It's invented over every 10 years or so with a different guy selling it and for some mysterious reason, nothing ever coming of it as usual. What about the HHO cars in the 70s that didn't pan out to anything but conspiracy theories.
@mikeyidh : Hello there. My understanding of the term (Brown's gas) comes from the inventer "yule or Yul Brown". I am not sure of how it is spelled. Just a bit of trivia.
@mikeyidh brown's gas was named that because of the man who patented its last name was Brown lol, like your version better, use distilled water it wont do that, need to add electrolites though less water might help the voltage/current too.
No that is NOT a good idea. Hydrogen can not create combustion without a reactive substance. Hydrogen alone is OK to store in compressed container but storing it with a highly reactive chemical such as oxygen may lead to a fatal death for having it in you car. The best thing you can do is to hook your cell strait to the engine using a back flash for safety. Your Idea could work if you can separate the two gases and storing them in separate containers.
hey, mikeyidh, i have a hho cell and its doing great, i really wanted to have it put on my 97' corolla, but i have no idea how since im no mechanic.. can u help me with that? the engine is a craburetor type, im not sure if it is better or not really, thanks much!
Hmmm carburetor.. Gas is spilled in through the air flow from the Carb ( WIKI Bernoulli's principle). So the only way to cut back on the gasoline is to slow down the flow of air by the carb. HHO is four times explosive than gasoline. You need about 100ml of it for a power stroke in the engine. I would some how slow the flow by the carb and pump in 2 LPM of HHO to replace the loss gas. This would make you a good booster. Its different but you could do it.
Nice work there dude. And hey by the way I'm sorry I didn't reply on your mail on Youtube before, my ability to use internet was pretty limited. I'm starting up a HHO-conversion shop here in Sweden, although we have problems with the lamda-sensors. It's like, the mileage is increased for the first day, but after that the mileage is back to normal again. You have any idea why?
Electronic Fuel injection enhancer Also known as E.F.I.E. What this does is it tells the ECM ( the car computer) to cut back on gas fuel injections when the O2 sensor picks up oxygen, or manually cutting back on fuel by a installed tuner inside the cab. Youll need one to save gas.
I see cell I see bubbles and weird music. Where are your numbers? Are you using stainless steel or reactive aluminum?? Without numbers super cell is not that super.. just another HHO video sry
This has been flagged as spam show
ush2. com/H2DVD001_detail_page. htm
youtube. com/watch?v=3bEyv1FRVYI&feature=channel_video_title
/watch?v=tRYj23Ond3g&feature=relmfu
/watch?v=DCfu-OWqVI0&feature=related
/watch?v=3JbXLGIL_fc&feature=related
/watch?v=ydEkV-E0mP8&feature=related
all hydrogen n pioneers
charukrsnadasa 3 months ago
I heard if you add baking soda or salt on the water to get the HHO will make it corrosive to the aluminum parts in the intake system exposed .is this right???
mikevegas88 4 months ago
ITS AMAZING HOW MANY IDIOTS DO NOTHING BUT BITCH!!!!
HEY GUYS TAKE YOUR MIDOLS AND LET THE KID WORK!!!!!
GREAT WORK GUY, MANY STARTED LIKE YOU DOING EXPERIMENTS AND SEE HOW THINGS WORK, BABY STEPS. PUT A BIT OF BAKING SODA, SEE WHAT HAPPENS. AND DONT INHALE THE GAS, POISON.
chris03653837 4 months ago
Stored Hydrogen with it's Oxygen counter part in a 200 psi container is not Diesel, it DOESN"T explode under pressure. Propane is VERY volatile yet it is stored in a pressure tank along with its Oxygen and no one says anything about it. Puncture a propane tank with a spark present and BOOM, same conditions as Hydrogen. Just put safety release valves on the tank to bleed it out in a second or two under emergency conditions, route it away from any sensitive human area.
VonBraun87545 4 months ago
technically city tap water does have some electrolytes in it with all the chemicals they use to purify and ingredients they add to it "For Our Health". all in all city tap water has a lot of impurity's in it. use rain water for another experiment and see if there isn't a difference. thanks for the wonderful video.
giant648 5 months ago
and they taught me in school to not mix water with electricity... those foolish teachers.
krgrubbs 7 months ago 2
Badass!!!
worryphree 9 months ago
For EvanSeidl1 , ' it is impossible to have anything running at 100% efficiency. ' Really? Sorry dude but I always work at 110% efficiency! I'm just that good at my job! LMFAO! I don't remember if he ever ran on water but I once heard of this guy that could walk on it! lol Anyway... back to the video... :)
Itsmeeman1 10 months ago
Useless device and pathetic music. All you HHO freaks are the same. IT'S NOT EFFICIENT. Do ur homework.
truthseeka1 1 year ago
@truthseeka1 im sure you have some sort of website that proves us wrong hmm? because theres are tons of website that proves us right. this proccess can be done with a 9v battery and what it produces off of a 9vbattery some water and bakingsoda is more energy then that 9v battery. id call that eficient if you ask me. weither its 100% efficient thats a different story. maybe you should do YOUR homework before trolling on science that will one day take over the oil industry.
SeanofZeus 5 months ago
@SeanofZeus HMMMMMM Talk about doing YOUR homework. Baking soda used in electrolysis is a no no, the same goes for salt. (TOXIC)...... As for gaining more energy than the 9 volt battery has, sounds like over unity crap. I suppose you believe in santa claus as well........ Man stop sniffing that HHO. ELECTROLYSIS IS NOT EFFICIENT.
truthseeka1 5 months ago
@truthseeka1 ha if you dissin HHO then why are you watching these vids. electrolisis itself isnt toxic, its the byproduct that is. and can be easily disposed of at your local hazardous waste facility in your city. or you can do a little bit of research and figure out how to neutralize the toxic material by your self. im talking about hexavalent chromium of course. tell me why salt and Bi-carb are toxic huu? the stainless steel plates produce hexavalent chromuim. salt or bi-carb help? i dont know
SeanofZeus 5 months ago
@SeanofZeus I'm not going to go to far into your question. Salt in electrolysis produces chlorine. Bi carb gives off carbon dioxide, carbon monoxide, the electrolyte solution becomes a corrosive alkaline. Breathe enough of any of these gases and you'll know about it. Anyway time for you to do some homework.
truthseeka1 5 months ago
Doesn't the water turn brown because of the chromium in the metal used? If thats the cause, then you should be aware of hexavalent chromium.
MattiasOfTheMetal 1 year ago
name of the song?
jellynation 1 year ago
How much frikking current is that thing pulling to get 2litres per minute? How about you really shock us all and produce 2litres per minute with only a small amount of current (milliamps please). ANYONE can whip out their welder and rig it up to some stainless steel plates and water and get HHO.
djahriman 1 year ago
I must make the correction that it is impossible to have anything running at 100% efficiency. Work in=work out is the definition of a 100% efficient system, by nature an electrical system is very inefficient. If you ever start trying to sell this DO NOT call it 100% efficient because it is impossible, by the laws of the universe. Also do some research as to how long the water will be able to produce hydrogen and at what rate, you may be surprised...in a bad way : /
EvanSeidl1 1 year ago
nice
Video85Man 1 year ago
Király a vidi jó a zene !
SuperPotyi 1 year ago
super?
TheCombineify 1 year ago
kill the damn music, unwatchable
sakerpaderborn 2 years ago
what about after 48 Hours of this thing running?
how in hell are you going to supply such a large current in your car
proff128 2 years ago
Until people are posting videos showing 20 or 200 litres a minute, they are wasting everyone's time. 12V "high" is probably 14.4V and running from the mains at 200A, your gas output is pathetic.
pittseyp 2 years ago 8
so your car can run on hydrogen?
what are you working on now?
erikpollack 2 years ago
Nice work bro! I started gathering supplies to build my own hydrogen cell under the hood of my car. The only thing i'm not confident in is how to prevent a backfire between H & O flowing from the bubbler to the intake. What can I use that does not need modification? Oxygen Acetaline backflow arresters require hundreds of pounds of force. What doesn't?
Bigtuna91 2 years ago
Make your own arrester i used a plastic conduit pipe with barb connecters on each end and filled it with bronze wool just make sure it is air tight someone on you tube already has a vid on this look it up...good luck
crayzeecanuk 2 years ago
Man you can use a one way valve from a welder's set or butane torch and hook it up to the end of your bubbler 100% gaurantee it wont backfire you can even test it yourself.
DevastatingStorm 2 years ago
a pvc valve will work
DoctorLucky1 2 years ago
Comment removed
Bigtuna91 2 years ago
add baking soda to your water tank, or another substance containing electrolytes, that will increase your output drastically
AndrewHarley89 2 years ago
I can guarantee you this did not perform at 100% efficiency. The only way you can achieve 100% is by calculating it and not accounting for any variables or just making numbers up. Is this how you got 100% efficiency, on paper? We already know that HHO perpetual motion cars are a fraud and the Mythbusters even backed up the math we already saw with actual tests. Why are people still trying to rip themselves off? Perhaps I'm in the wrong industry if people are actually willing to be conned.
BigBananaMan 2 years ago
You are an idiot.
QuarkToo 2 years ago
1. your investor is a tool for putting money into a project that your doing.
2. we dont want to see your prep time show the damn results.
3. your doing something wrong your water looks like ass.
4. if i didnt mention already you are a tool aswell.
Chewylu103 2 years ago 2
did it actually run all by itself with no gasoline?
r0beart0 2 years ago
Your bubbles are very small. My 21 plate 6 by 6 inch plate dry cell produces 5lmp at 50 amps. Mine would smoke yours any day. Dry cells are definitely the way to go if you want good output and performance.
bestog2000 2 years ago
Great idea. what if you used the gas tank of the dodge to use as the container, and tried to raise the fuel injectors up to just grab the Hho? would that be enough to power a car. also i would also like to know how many amps your pulling, if its enough to run off of a couple of car batteries then you might just be able to power a car. keep us posted on your findings.
Devildog01TJ 3 years ago
you shouldn't lift the cell out of the water, it could arch and explode in your hand. trust me I know
alexh58 3 years ago
I too am interested in the numbers. Especally how many AMPS you are pulling and how your plates are wired.
23rvoops 3 years ago
HHO generation using a lot of amps is pointless. This is brute force electrolysis... One must be able to run a car only with HHO using no more than 5A.
ttsoares 3 years ago
I'm not knocking your video I think its great. But what is up with the brown bubbly tap water?
It reminds me of what the toxic avenger fell into. But seriously good work and if you use HHO on a carbed vehicle I would just turn down the Air/fuel screw a turn. But that is if you can get enough HHO in there to replace the missing fuel.
hdl13 3 years ago
The brown water is the chemical effect from the electrolysis process. See in city water they add chlorine and other chemicals to keep the water clean. When you split the covalent bonds in water ( what holds the hydrogen and oxygen together). You also break hydrogen bonds (holds water molecules together) the chemicals are freed in the water. That's where the term browns gas might of appeared from.
mikeyidh 3 years ago
Thanks that is a perfect explanation.
hdl13 3 years ago
LMAO no Brown's gas comes from a guy named BROWN. You are partially correct on the mud your getting in your water, some of it comes from the water, the rest comes from the iron in the stainless. It's called iron oxide. It appears to me you have made a very efficient water heater.
onecraftydude 3 years ago
What about Klein's gas. Klein discovered the new magical gas called Klein's gas back in [I don't really care when]. After that the self proclaimed Dr. Brown (the one and only graduate of the college he and a friend founded) invented HHO. It's invented over every 10 years or so with a different guy selling it and for some mysterious reason, nothing ever coming of it as usual. What about the HHO cars in the 70s that didn't pan out to anything but conspiracy theories.
BigBananaMan 2 years ago
@mikeyidh
Sir, I think the brown color is caused by the formation of ferric hydroxide
,Maybe he used normal steel electrodes
Ayman - Egypt
theatomic666666 1 year ago
@mikeyidh : Hello there. My understanding of the term (Brown's gas) comes from the inventer "yule or Yul Brown". I am not sure of how it is spelled. Just a bit of trivia.
Rudy.
coffeecup10000 1 year ago
@mikeyidh brown's gas was named that because of the man who patented its last name was Brown lol, like your version better, use distilled water it wont do that, need to add electrolites though less water might help the voltage/current too.
Me102288 1 year ago
@hdl13 I think its the Iron content in the tap water rusting turning the water brown.
kren2012 7 months ago
@hdl13 SHIT..Music..
renetty 5 months ago
You decided to use a starter charger becUAse why? BecAUse you couldn't do a spell check?
mag72net 3 years ago
Find me one word I spelled incorrectly.
mikeyidh 3 years ago
"becuase" u rock! that dude sucks. =D
rtan188 3 years ago
how about "invester/investers"...should be investor/s, ;-)
Monch626 3 years ago
How about, "electrolyte"
champagnerocker 2 years ago
This has been flagged as spam show
sick vids homie 5 stars and favorite! check out my vid i made 2 so far =]
bankedonk 3 years ago
hope you have alot of money,what you are thinking on doing will very complex,My advise run it from your cell
one2exile 3 years ago
No that is NOT a good idea. Hydrogen can not create combustion without a reactive substance. Hydrogen alone is OK to store in compressed container but storing it with a highly reactive chemical such as oxygen may lead to a fatal death for having it in you car. The best thing you can do is to hook your cell strait to the engine using a back flash for safety. Your Idea could work if you can separate the two gases and storing them in separate containers.
mikeyidh 3 years ago
hey, mikeyidh, i have a hho cell and its doing great, i really wanted to have it put on my 97' corolla, but i have no idea how since im no mechanic.. can u help me with that? the engine is a craburetor type, im not sure if it is better or not really, thanks much!
MobBossJome 3 years ago
Hmmm carburetor.. Gas is spilled in through the air flow from the Carb ( WIKI Bernoulli's principle). So the only way to cut back on the gasoline is to slow down the flow of air by the carb. HHO is four times explosive than gasoline. You need about 100ml of it for a power stroke in the engine. I would some how slow the flow by the carb and pump in 2 LPM of HHO to replace the loss gas. This would make you a good booster. Its different but you could do it.
mikeyidh 3 years ago
Mikeyidh, have you seen, Roy McAlister's Fundamentals?
How about scarecrow?
/watch?v=tQl1q7XJ6Ng
Signzit 3 years ago
You spelled "investor" incorrectly, lol.
allumina 3 years ago
Also, Electrolyte
mykol13v 3 years ago
Nice work there dude. And hey by the way I'm sorry I didn't reply on your mail on Youtube before, my ability to use internet was pretty limited. I'm starting up a HHO-conversion shop here in Sweden, although we have problems with the lamda-sensors. It's like, the mileage is increased for the first day, but after that the mileage is back to normal again. You have any idea why?
Nichen 3 years ago
You have a efie? Its probably a bad O2 sensor.
mikeyidh 3 years ago
no, what is a efie?
Nichen 3 years ago
Electronic Fuel injection enhancer Also known as E.F.I.E. What this does is it tells the ECM ( the car computer) to cut back on gas fuel injections when the O2 sensor picks up oxygen, or manually cutting back on fuel by a installed tuner inside the cab. Youll need one to save gas.
mikeyidh 3 years ago
If you have any more troubles just ask me.
mikeyidh 3 years ago
Hey thanks a LOT dude! That was crucial info!
Nichen 3 years ago
nice song
aaronisdumbusa 3 years ago
Hey Mikeyidh, where did you get those HHO injectors -- your "secret weapon". I'd really like to hear about (and see) more about those!
nashsi 3 years ago
Those were propane injectors found most fork lifts. But with the help from the tech I will be able to modify them for HHO.
mikeyidh 3 years ago
I see cell I see bubbles and weird music. Where are your numbers? Are you using stainless steel or reactive aluminum?? Without numbers super cell is not that super.. just another HHO video sry
minde4000 3 years ago 3
He said he is using 316 stainless steel, but I'd sure like to see the numbers to -- especially MMW.
nashsi 3 years ago
I wish you explain what you are doing instead of playing bum bum music.
JHONYTEEMD 3 years ago