The indicator of measurement accuracy – with increasing of accuracy fills in with yellow colour. With each measurement (it takes 10 sec.) the column of the indicator of measurement accuracy grows till complete
fulfillment. The complete fulfillment takes about 2 minutes (12 measurements). This is the exact average of background radiation.
Thanks for the reply! Yes I was measuring in my room it was 0.11-0.16 most of the time but once it suddenly spiked to 0.22 then 0.33 and straight to 0 and stabilizing again at 0.16, I was around my computer, is this to do with magnetic field ? Or does this look dangerous ;(
In this video, the banana is a normal concentration of nitrates, but in potatoes - dangerous concentration . You can watch better this video, if switch it to HD-mode.
Oh and lastly how long should I measure? Is 20seconds enough to get an accurate reading? I left it for about 3minutes or longer
apedsta 3 months ago
@apedsta
The indicator of measurement accuracy – with increasing of accuracy fills in with yellow colour. With each measurement (it takes 10 sec.) the column of the indicator of measurement accuracy grows till complete
fulfillment. The complete fulfillment takes about 2 minutes (12 measurements). This is the exact average of background radiation.
vasukino 3 months ago
Thanks for the reply! Yes I was measuring in my room it was 0.11-0.16 most of the time but once it suddenly spiked to 0.22 then 0.33 and straight to 0 and stabilizing again at 0.16, I was around my computer, is this to do with magnetic field ? Or does this look dangerous ;(
apedsta 3 months ago
Hi there! Do you have any guide to normal background radiation levels for indoors? I got the device from you, thanks again ~
apedsta 3 months ago
@apedsta
Hi!
Normal background radiation is 0.05-0.20 mcSv/h. (5-20 mcR/h.)
If radiation background exceeds 0.4 mcSv/h., you need to look for the
reasons of this exceeding.
If radiation background exceeds 1.2 mcSv/h., it is not recommended to stay
in this place, it may be dangerous.
vasukino 3 months ago
Is it possible to use this to test the radioactive Cesium content of food?
brian94709 6 months ago
@brian94709
If a high content of cesium in the food, then Ecotester or the radiation detector Soeks-01M detects beta and gamma radiation.
vasukino 6 months ago
@vasukino
Hmm, but I guess it is not straightforward to convert such a reading into, say, a becquerel per kilogram value for the food?
brian94709 6 months ago
@brian94709
This device does not measure in the becquerel. Only mcSv / h and mcR / h.
vasukino 6 months ago
@EatTheRich2012
In this video, the banana is a normal concentration of nitrates, but in potatoes - dangerous concentration . You can watch better this video, if switch it to HD-mode.
vasukino 7 months ago
Why are the shipping cost from Russian Federationn high?
Powdermonkey99 7 months ago
@Powdermonkey99
I also do not understand it. Mail in Russia is slow and expensive than in other countries.
vasukino 7 months ago