Earth Battery Joule Thief LEDs Experiments

[ConnorXV]

@ pirate88179 I can imagine, but I would be worried about tainting the soil, if this was somehow reproduced large scale what effect on the environment reacting metals with the earth constantly. But maybe there's a way...

[ricoalagoproductions]

If I use a series of earth batteries and step-up transformesrs, can I power my house with this technology?

[Pirate88179]

@ricoalagoproductions

That is what everyone is working toward...we are not there yet. Stubblefield powered his farm with this technology back in the late 1800's.

[ricoalagoproductions]

@Pirate88179 You mean to tell me this knowledge is been around since the 1800s and we are now finding out? How many wars could have been avoided if this info had been released sooner? mmm.....

[969SobiasTokeS696]

@Pirate88179

careful now,

dont want to piss off any high level crude oil executives

[Pirate88179]

@969SobiasTokeS696

Ha ha...little danger of that at this point. My best thus far is lighting 400 leds from the EB. Now, if I were running my home from it, then they might take notice.

Bill

[LiquidChem]

@Pirate88179 @Pirate88179 nobody would care if you cancelled your electric. everyone should, and I mean every single person should cancel their electric all at once and tell them to go f themselves until they find a way to give us free energy. they will have no choice.

[ConnorXV]

@ricoalagoproductions you need to think about the power (wattage) rather than voltage, earth batteries are going to be very large but give out a low current as well as run out after some period meaning it needs to be replaced, if you just step up a 20v 1 Watt input to 230v output you will still only have 1W of power, that wont work to power your house.

[Pirate88179]

@ConnorXV

With what I am doing, I agree 100% with this. But, remember that Stubblefield lit his house, and heated his house and ran the telephone system of Murry, KY using his earth batteries. I believe that it can be done, I just don't know how to do it yet.

Bill

[LiquidChem]

deeper cathode , more surface area, farther away from anode, use 2 metals farthest apart as possible on nobility scale of dissimilar metals.. make 10 of these to get 12-14 volts. From my experiments, it seems like 100 ma is doable, so ten of those and you have one amp (of 12V potential).. steady current. the stubblefield coil seems to give more power for the amount of space it uses but takes more materials and work to create, although its more efficient and more power so prob. worth it

[Pirate88179]

@LiquidChem

This type of battery/generator can not be placed in series or parallel. I have tried and so have many others. The Stubblefield coil can be. Check out my latest videos where I light 400 leds from this set up.

Thanks for your comment.

Bill

[RickGuyver]

HI, Bill. Most earth batteries I've seen seem to work much like a typical chemical reaction battery, using two opposite metals such as copper and zinc. I noticed you are using carbon rods for the positive electrodes, and I'm not sure what for the negative. Would you mind explaining a little the materials and procedure used to construct the type of EB you are using. Maybe you could create a video just on that subject, if you haven't already. Either way, keep up the good work and thank you! 

[Pirate88179]

@RickGuyver

I believe you are basically correct but there is much more to it than just that from our research. I use carbon on the positive (meridian north) and magnesium on the neg. (meridian south) If you check out the earth battery topics at OU dot com, you will see how we worked up to this and have now far surpassed this.

Thanks

Bill

[LoneOarman]

Why LED when you can do CFL?

[Pirate88179]

This video was made a while ago. Before I got my big cap (650 F) I could not light cfl's from the ground back then.  I could light floro tubes though.

Thanks,

Bill

[id4rk2]

@LoneOarman depending on the frequencie the joule thief operates, if it's higher than 1ghz it will emit microwave. you don't want to have your brain fried right?

[mrnightowl]

I've enjoyed your videos this evening. Have you or anyone else made a practical application with this? Like being plugged into a charge controller to trickle charge a battery or bank of batteries for use on demand. Or using multiple earth batteries to create more power? I know there must be good power available either in the ground or the air. My aerials zap(static) me sometimes on my roof with nothing connected to them. Have yet to experiment in the ground though.

[Pirate88179]

Thank you very much. Well, good question. I can run my outside lights for free (I am up to 400 leds so far) by charging up my 650 Farad supercap during the day and using it at night. There is some interesting work being done on overunitydotcom using ground rods and antennas to get real power for free. I have not done this yet but they say the power is there, it is real and it works. Check out the topics over there and join in. I learned a lot about this type of thing there.

Thanks,

Bill

[trance183]

Wait are you talking about Radiant Energy? I have been dreaming of one day building a Radiant Energy machine that Mr. Thomas Henry Moray built 60 years ago. What topic is this under?

[LoneOarman]

Have a look on energeticforum and overunitydotcom and read both the SLAYER007 JOULE THIEF and IMHOTEP RADIANT CFL threads. The schematics are there, and all link to these youtube demonstration videos. Also search youtube for "off the grid" and for particularly Michael Stritzki

[gerhardusmaximus]

tnx very much for your vids. can you please give a link, so that we can see the circuit plan for the joule thief used with this setting (earthbattery and leds).

best gerhard

[Pirate88179]

I don't really have a circuit diagram for this particular experiment. all of the components are listed on the right under more info. If you go to Overunitydotcom in the Joule their and Joule thief diagrams topics, you will see schematics of the joule thief. They are simple to make and if you use supercaps and an earth battery, you can replicate this. Also check out the earth battery topics as well.

Thank you,

Bill

[onthecuttingedge2005]

Make some large high density super caps from Polymer coated carbon paper, they have excellent surface area. I call them HDCC, after I assemble them I seal them in a vacuum bag to lower break down of the cap.

[Pirate88179]

That sounds cool. How many Farads are they? I mean, if you made a really big one, how many Farads would it be?

Thanks,

Bill

[onthecuttingedge2005]

you could build them 1 Farad plus or minus, you would have to test the MFD as you stack them and arrange the terminal plates to suit your style needs for the cap.

[InsomniusPFA]

i must be retarded..NONE of this works for me, i got my joule theif fuji circuit thing and i cant get it to do shit...but yo props on your sucess

[Pirate88179]

Hey, none of us got it on the first try, don't give up. Were you able to get it to work with an AA battery first? If not, possibly your modification needs a little tweaking. Did you short or cut the diode on the board? On Overunitydotcom, in the joule thief diagrams topic, we have good instructions on the Fuji mods.

Bill

[VladKiller006]

Hey what is the material of the second anode? one is graphite, and the second is?

[Pirate88179]

A five pound block of magnesium, on the meridian south alignment.

Bill

[VladKiller006]

Thank you vey much, i hope it will power my garden leds for qiet long time :)

[morpher44]

yes brilliant. I wanted to try this but you beat me too it. Earthbattery & joule thief -- brilliant.

[Pirate88179]

Sorry I missed your post for so long. Thank you very much, I really do appreciate it.

Bill

[alex681219]

Hi, I make a jt 360 turns, it draws more ennergy? is better more or less turns?

[Pirate88179]

Depends on what your goals are. Most in our group are into very low amp draw with the highest output possible for efficiency. Once you tune your circuit (toroid to the number of winding via resistance) this is the best it will get in that set-up. Then try adding more winding, less, more resistance, less, to optimize that JT. One fellow has like .1 mA draw and gets about 1300 volts out.

Bill

[alex681219]

Tkx...bucaner..! How can add more ranges of frecuencies(resistance), more pots? or change the limit resistance? how i can see the optimus state, just mesure the input vs. output?. I see an old material about tpu with s mark and he put magnets in his solid state generator (static), but whatching this dinamic magnets watch?v=eu7GW5Udtms&feature=re­lated, Ithink that mixing coils magnets in tune creates a real energy simphony...tkx for share

[Pirate88179]

It gets fairly complicated to explain here. Go to Overunitydotcom (Put a . instead of dot) and read the joule thief topic. Folks are using small caps and a variable resistor to tune their circuits as well as different wire sizes and number of windings. These are very interesting devices and there is more to them than most folks realize.

Bill

[kubikop]

Hi Bill

You should link your videos by creating a video responses, or do a playlist. It makes it easier for the viewers...

Paul

[Pirate88179]

Thanks, I know how to do video responses but I will have to learn how to do a playlist.

Bill

[kubikop]

Nice, how many turns and what gauge is your wire?

Paul

[Pirate88179]

10 turns bifilar and 22 ga. insulated stranded wire. 1" OD toroid, 2n3904 trans. and 1k resistor.

Bill

[gccengineering1996]

What type of ferrite material is needed?  I tried many types from another project one I thought was a ferrite donut come to it that it wasn't it was some kind of magnet from some earphones.. Another one was from a power supply in a plastic white plastic case. Thanks for telling me what wire was needed for the project. I have to go get it soon. Thanks for the advice.

[Pirate88179]

There are many types of ferrite and the main difference is the permeability of the material. Almost all of the toroids you see in my videos are from electronics goldmine, 5 for $1. These are 1" OD x 1/2" ID x about 1/2" thick. These are a good place to start for the basic joule thief circuit. Our experimenters in my group are now using other types and getting incredible results. (1,500 volts from an AA battery.) They are winding multiple secondaries on the same toroid.

Bil

[FORCETHETRUTH]

Five stars Bill! Way to go man. Great video! Hey, I researched something you may want to check out. The joule thief is only using the ferrule toroid to keep the emf trigger spike from blowing the transistor, thats all they are used for in electronics. if you are looking for ou effects, I suggest bifilar coil on air or iron. More transformer effect. Induction wave. Stubblefield, Moray, Coler, all used this. They took that pulse and amplified it, then tapped the extra. Thanks, fantastic!

[Pirate88179]

Thank you. On our joule thief topic over at OUdotcom, some have tried air cores and iron and did not get very good results. It is the permeability of the ferrite (or any toroid material) and type of transistor, and resistance that appears to determine the frequency. I have made 2 Stubblefield coils and they seem to put out more mA's than this set-up so far. They are very hard to wind however.

Bill

[WilbyInebriated]

5 stars, excellent.

[Pirate88179]

Thanks Wilby! More to come.

Bill

[crob227]

great job, closest i have seen to free energy

[Pirate88179]

Thank you. I think so too. This is a very simple method that anyone can replicate, and should.

Thanks,

Bill

[jonnydavro]

Hi Bill.This is great.You are getting usable power from your earth battery.I know little about them but thanks to your vid, i will find out.Thanks for sharing.Regards jonnydavro

[Pirate88179]

Thanks Jonny! We have a lot more we can do with this. I just used the simple joule thief. Others in our group are getting hundreds of volts from their multi-winding coils and if I use some of those, who knows what we can light up or run?

Bill

[jeannacav]

awesome, Bill.

words fail

jeanna

[Pirate88179]

Thank you Jeanna! Wait until I catch up with your coil winding skills and start making some MK replications. I wonder what we could light up then?

Bill