Im not sure about the EPA issues but good on you for having a crack and ending up with a half decent job. I do a fair bit of acrylic but now looking @ this i might have a crack at painting my BMW which was vandalised. Might do it in my garage and use a decent mask though.
EPA does NOT deal with residental areas. only businesses. your local councils does. you need to check with them if the use of two-pack polyurethane is allowed. i know for a fact here in Sydney NSW you can spray all day as long as.
1. your not running a business
2. your neighbours are not complaining i.e not endangering their health etc.
i need help ion single stage paint i have done many bc/cc painting but i have never done single stage .... i just went to the store today and got some single stage paint ppg 9300 witch is the blackest black ever it should make black car that park next to it less black ... any way i have never sprayed ss so if any one can help that would be great
funny thing is as a painter if i painted in my driveway e.p.a. would fuck me up the ass.but this clown can. good quality paint by the way cheap shit hi chem which doesnt hold a candle to spies hecker,dupont or glasurit.
wonder if the neighbours like the smell of the 2k paint, i know i used to mix it up for customers and bodyshops and it stinks, oh and it has lead in it thats why you use a air fed mask.
i've got a fairly hefty scratch on my back bumper (only on the bumper so it might not be too expensive to replace) but i wanna try repainting it with an air compressor.. if the scratch is say 15cmx25cms which has gone through the clear coat and everything, and i sand it all down so it's flat and nice to paint on (prepped properly) will i be able to respray that.. or will i need to prep the whole bumper?? car is a 2005 model so it's fairly new good looking paint.. dont want it to be too noticable
@pokehimon paint and clearcoat over the paint then just buy a spray can blender and blend it good..... buff and your ready... im sure you fixed it but just in case
good on you bloke, having a go, without the toss involved spending stupid coin on ridiculous paint finishes that would feed the southern half of african orphans for a year.
This guy is great. He looks at his work and tells you he had a few problems but in general it's all good. He also explains how he will get the trash out, which is cool. I love it when people are honest about their work and he did a fine job. Heck he didn't have a nice clean sealed off booth and it turned out pretty nice anyway. Good job.
that's the good thing about 2pak its a glorafide name for enamel with hardener its hard as and you can be a spray painters asshole and still do a grate job bad bit to harden it properly you need a heat chamber so it will take nilly for ever to dry and be hard enough to polish good job though
you dont know shit dumb ass! 2pak is not just enamel with hardener you half wit and it requires more skill to apply than any other shit like acrylic and enamel. oh, it dries naturally overnight too, heated booths just speed it up. next time keep your uneducated dip shit opinions to yourself!
Orange Peel is where the paint takes on the appearance of the skin of an orange. Its normally when paint has been applied too heavy. It can be rubbed down and buffed out.
Most urethane paints allow up to 10-20% thinner to be added. Even so, the most skilled sprayers will usually always have a degree of orange peel in the finish. If you look at ANY modern OEM paint finish it has orange peel. It's because the hardeners in the paint don't allow it to smooth out enough prior to drying.
Trying a slower hardener will decrease orange peel to be very minimal if sprayed well, however this increases chances of defects due to dust etc. and takes longer to dry.
@ paulspalace: Orange peel is formed when paint is applied too lightly/overspray has landed after coating. The goal is to get enough paint on the surface to allow the paint to flatten and smooth out before it dries, without causing runs.
You're correct it can be rubbed down and buffed out, myself having painted several cars/parts. Sanding/Removing the gloss of gun finish is something you'll almost always regret when using urethane paints. Unless the spray pattern is ordinary, of course.
Nah you got it wrong shit lips YOUR the tough talker! Remember??..LOL.. You fuckin' organ grinding monkey,daughter of 2 ankles.
Thats 2 foot lower than a couple of cunts just for braindead inbreds like you.
You and your entire family were conceived from anal sex..Mr and Mrs Shitter and the Shitlings. How was that dickbreath?Did I scare you as much as you scared me? Tosser.
sweet dude pretty game doing a ful respray out side that w400 is a good gun hey, same as mine :) love that filter on ya airline to stop water through the gun i need one!! nice work!
Top job for just doing it in the front yard. Biggest problem if I did this is in direct sun the panels would get too hot making it easier to get runs. Plus flash off time might be a bit too quick. Neighbours kids might drop dead but that wouldn't be my problem unless they found out about the isocyanates. Surprised how well this turned out. Good work.
Iwata w400,good choice of gun, light as ay. Fair effort mate,i wouldnt be game enough to respray a car in me backyard, wud b a c*nt to buff out all the trash lol and the neighbours wud probly complain ay.
Sik job man, i used the same paint brand yesterday to paint a horse float, high chem, did a metalic silver with a clear coat to finish, 1 bad thing it started to get dark and the farken bugs came in ay.
You can do so many neat things that I had no idea about Jason! Painting cars, playing drums, cage fighting, You're all man!
So - are you going to get those gold rims for your tyres (TIRES!) and get that old english letter style sun visor sticker that said says "'Roo Beaner Rollin Thug For Life" on top?
Good Job! Man I own a 1974 ford grand Torino it's all grey prime now. I done all the body work on it, But I don't claim to be good at it. $1850 in this real screwed up prime job, I'm broke now, Sucks This dude name Raydean Jessie, Said it was ready and he was going to shoot it, on the deadline it wasn't even touched! He robbed me and got away with it courts done nothing, Any idea's
I drove over the road then (job) I could not watch his progress. The bastard!
No real bugs were died in the making of this film.
tassiespirit 1 week ago
Not bad! I'm thinking of having a go myself. Trying to pick a day that isn't windy or wet is my problem. LOL
shadowfighting88 2 weeks ago
Im not sure about the EPA issues but good on you for having a crack and ending up with a half decent job. I do a fair bit of acrylic but now looking @ this i might have a crack at painting my BMW which was vandalised. Might do it in my garage and use a decent mask though.
HUGEMEOW 1 month ago
EPA does NOT deal with residental areas. only businesses. your local councils does. you need to check with them if the use of two-pack polyurethane is allowed. i know for a fact here in Sydney NSW you can spray all day as long as.
1. your not running a business
2. your neighbours are not complaining i.e not endangering their health etc.
HighPerformance7uner 3 months ago
a few burnouts should clean the tyre up nicely
RepsorpKirtap 4 months ago
To keep from getting orange peel I would use a larger compressor. At least an 80 gallon. PSI is everything.
jimisback 5 months ago
y don't u tell us about your last holiday aswell
xr6thusky 5 months ago
shit job ,,,u talk too much , try showing how u paint
TrojanWarrior74 5 months ago
should have done the driveway as well look good.
tunastrike11 6 months ago
SHUT :UP !!!!!!!!!!!!!!!!!!!!!!!!!!
heavyhitter7425 11 months ago
i need help ion single stage paint i have done many bc/cc painting but i have never done single stage .... i just went to the store today and got some single stage paint ppg 9300 witch is the blackest black ever it should make black car that park next to it less black ... any way i have never sprayed ss so if any one can help that would be great
mauiboypoi 1 year ago
funny thing is as a painter if i painted in my driveway e.p.a. would fuck me up the ass.but this clown can. good quality paint by the way cheap shit hi chem which doesnt hold a candle to spies hecker,dupont or glasurit.
faber384 1 year ago
2-pak out on the street LOL Did anybody ring the EPA ? Obviously some people dont know how dangerous the stuff is.
1106SMOK 1 year ago
My biggest hassle is trying to find somewhere to paint my car, it's starting to give me the shits
ryno2085 1 year ago
wonder if the neighbours like the smell of the 2k paint, i know i used to mix it up for customers and bodyshops and it stinks, oh and it has lead in it thats why you use a air fed mask.
oakwoods55 1 year ago
white is easy to see from distance
ahillson 1 year ago
i've got a fairly hefty scratch on my back bumper (only on the bumper so it might not be too expensive to replace) but i wanna try repainting it with an air compressor.. if the scratch is say 15cmx25cms which has gone through the clear coat and everything, and i sand it all down so it's flat and nice to paint on (prepped properly) will i be able to respray that.. or will i need to prep the whole bumper?? car is a 2005 model so it's fairly new good looking paint.. dont want it to be too noticable
pokehimon 1 year ago
@pokehimon paint and clearcoat over the paint then just buy a spray can blender and blend it good..... buff and your ready... im sure you fixed it but just in case
mauiboypoi 1 year ago
if u paint 2 pack without a oven or with a oven the first thing u must have is a air fed mask !! this 2 pack paint is lethal !!
primeraprim 1 year ago
good on you bloke, having a go, without the toss involved spending stupid coin on ridiculous paint finishes that would feed the southern half of african orphans for a year.
top effort.
Snippetdog 1 year ago
same gun as mine :)
krebzy 1 year ago
Mrfireblade I musta read your comment about three times prob the funniest thing iv ever seen. Quality lmao!!
KillerJJH 1 year ago
I would definitely leave the bugs stuck to the fender and add some flys and bees if possible, mate.
surfandsand2 1 year ago
looks good did u paint it at home?
DwarfGuy1 1 year ago
Jason Donovan, is that you? lol
PJohnny76 1 year ago
i say if are going to show how to paint more showing & less talk
escuridad1 1 year ago 7
LMAO
beemerman540 2 years ago
This guy is great. He looks at his work and tells you he had a few problems but in general it's all good. He also explains how he will get the trash out, which is cool. I love it when people are honest about their work and he did a fine job. Heck he didn't have a nice clean sealed off booth and it turned out pretty nice anyway. Good job.
grok64 2 years ago
look at new car's they come out with orange peel farkkkkkkkkkkkkkk give the guy a brake
honda900fz 2 years ago
that's the good thing about 2pak its a glorafide name for enamel with hardener its hard as and you can be a spray painters asshole and still do a grate job bad bit to harden it properly you need a heat chamber so it will take nilly for ever to dry and be hard enough to polish good job though
honda900fz 2 years ago
you dont know shit dumb ass! 2pak is not just enamel with hardener you half wit and it requires more skill to apply than any other shit like acrylic and enamel. oh, it dries naturally overnight too, heated booths just speed it up. next time keep your uneducated dip shit opinions to yourself!
browny2441 1 year ago
Damn bugs
JuanPapaNicolao 2 years ago
u can put tp in that water filter almost everyone in the us does it
darknature79 2 years ago
kint festetted az utcán jóvan,biztos széplesz
mobelvagen88 2 years ago
lol, your respray equipment is worth more than car.
snapfreak 2 years ago
what !!you got bugs bugs in Australia :O i thought they all were in Canada!!!
MrCorrosive101 2 years ago
hi pal whats orange peel ?
thanx
TheRaceRepSpec 2 years ago
Orange Peel is where the paint takes on the appearance of the skin of an orange. Its normally when paint has been applied too heavy. It can be rubbed down and buffed out.
paulspalace 2 years ago
yua gotta add thinner to eliminate orange peel
satrianiomgomg 2 years ago
Most urethane paints allow up to 10-20% thinner to be added. Even so, the most skilled sprayers will usually always have a degree of orange peel in the finish. If you look at ANY modern OEM paint finish it has orange peel. It's because the hardeners in the paint don't allow it to smooth out enough prior to drying.
Trying a slower hardener will decrease orange peel to be very minimal if sprayed well, however this increases chances of defects due to dust etc. and takes longer to dry.
MAXSPL 2 years ago
@ paulspalace: Orange peel is formed when paint is applied too lightly/overspray has landed after coating. The goal is to get enough paint on the surface to allow the paint to flatten and smooth out before it dries, without causing runs.
You're correct it can be rubbed down and buffed out, myself having painted several cars/parts. Sanding/Removing the gloss of gun finish is something you'll almost always regret when using urethane paints. Unless the spray pattern is ordinary, of course.
MAXSPL 2 years ago
dude
ive just got the same brand paint from a shop in malaga.
nice vid with tips
burnoutnut 2 years ago
how much did the paint cost ? , im in perth and im looking to paint my car. how many lt do u think for a similar size car as in the video ?
frogger2222 2 years ago
well i did a motor cycle and i used one liter
cost about 157 for clear /thinners/ primer
burnoutnut 2 years ago
why didn;t you do it inside the garage with the door open for ventilation but avoid bugs and wind?
AmitG1984 2 years ago
cos dat car aint worth the effort
fdlbeats 2 years ago
how much gallons is that air compressor
tp2356 2 years ago
This comment has received too many negative votes show
You repeat yourself alot actually you repeat yourself alot you repeat yourself alot actually.
Actually, you do actually yes you do actually.
Fucking stuttering prick head!
constantlydoped 2 years ago
wow, you have issues lol. leave the guy alone he's done a good job
mikefoyle 2 years ago 2
Fucking tough typing no body.Try that comment eyeball to eyeball with the dude.Fucken knob.
mrfireblade121 2 years ago
Fucking tough talking little cock smoker... come and say it eye ball to eye ball with me!
You fucking faggot, son of 2 cunts.
You and your entire shit stained family are nothings.. just pieces of shit.
Fucking dog cock sucker.
constantlydoped 2 years ago
Nah you got it wrong shit lips YOUR the tough talker! Remember??..LOL.. You fuckin' organ grinding monkey,daughter of 2 ankles.
Thats 2 foot lower than a couple of cunts just for braindead inbreds like you.
You and your entire family were conceived from anal sex..Mr and Mrs Shitter and the Shitlings. How was that dickbreath?Did I scare you as much as you scared me? Tosser.
mrfireblade121 2 years ago
good job dude keep up the good work ,any updated vids on the cleaning up process
JAMBOOOOD 2 years ago
woooo, an aussie lol.
good work man.
KatoWcsdz 2 years ago
whats orange peel?
turtles24601 2 years ago
its a term or slang for the texture of the paint when it goes rough
playstationowner 2 years ago
Orange peel is when the paint has a texture resembles the bumpy surface of the skin of an orange.
2006DURAMAX 2 years ago
when the paint bubbles and looks like the top of an orange peel just imagine that texture and how it would look on a smooth surface.
Apeman1991 2 years ago
Good job!
erik61801 2 years ago
Nice job. Don't you listen to these nit-wits.
HayateAce 2 years ago 2
good vid mate, god i hate dickheads bad mouthing this, you painted a excell not a fucking 56 chev, it come up real nice! cheers bud
ElectroDrop 2 years ago
if this was filmed 20 years ago i might consider a nice comment but all can really say is your fukn kidding!!!!!
this comment was posted by a real spraypainter and also get a real gun
DEVILBISS
KOBY304 2 years ago
Its biting me neck! lol joking..
MrRoboto602 2 years ago
go to BODYREPAIRSCOTLAND on google they has workers from America and the scots got on very well with them it was good networking
Bodyrepairscotland 2 years ago
get a real gun get a digi sata
sr20rodeo 2 years ago
is this a joke? 2-pak outside in the street? lol
annzmanz 2 years ago 6
It came out good is cause you had good gear,smart guy.....
DDUFubar 2 years ago
where can i get one of those filters at?
18rhoadsrocks 3 years ago
sweet dude pretty game doing a ful respray out side that w400 is a good gun hey, same as mine :) love that filter on ya airline to stop water through the gun i need one!! nice work!
SHY910 3 years ago
where can I get one of the filters to remove water from the line??? what is the name of it?
madvette74 3 years ago
i wish i knew because i need one hey
SHY910 3 years ago
i will get it today!!!
Do yo guys live in Australia?
it is an american item. I will check
thanks
drummerlars 3 years ago
Top job for just doing it in the front yard. Biggest problem if I did this is in direct sun the panels would get too hot making it easier to get runs. Plus flash off time might be a bit too quick. Neighbours kids might drop dead but that wouldn't be my problem unless they found out about the isocyanates. Surprised how well this turned out. Good work.
lived4eva 3 years ago
Bloody good job mate.
MauriceSometimes 3 years ago
Iwata w400,good choice of gun, light as ay. Fair effort mate,i wouldnt be game enough to respray a car in me backyard, wud b a c*nt to buff out all the trash lol and the neighbours wud probly complain ay.
keels15 3 years ago
Sik job man, i used the same paint brand yesterday to paint a horse float, high chem, did a metalic silver with a clear coat to finish, 1 bad thing it started to get dark and the farken bugs came in ay.
Kayde2000 3 years ago
LOLOLOL..Buff him out... LOL
Kornkid135 3 years ago
...yeah screw the environment lol,lets all paint cars outdoors with 2k pmsl,not a bad bodge job,better compressor would help.
D0cDick 3 years ago 2
You can do so many neat things that I had no idea about Jason! Painting cars, playing drums, cage fighting, You're all man!
So - are you going to get those gold rims for your tyres (TIRES!) and get that old english letter style sun visor sticker that said says "'Roo Beaner Rollin Thug For Life" on top?
HinesBrad 3 years ago
sure am just in time for when your here dude!!!!
drummerlars 3 years ago
Good Job! Man I own a 1974 ford grand Torino it's all grey prime now. I done all the body work on it, But I don't claim to be good at it. $1850 in this real screwed up prime job, I'm broke now, Sucks This dude name Raydean Jessie, Said it was ready and he was going to shoot it, on the deadline it wasn't even touched! He robbed me and got away with it courts done nothing, Any idea's
I drove over the road then (job) I could not watch his progress. The bastard!
Snowman374th 3 years ago
Remember those commercials. Naw, Jace is too young for that.
cchapan 3 years ago
dang boy- jack of all trades are we?? lol
really cool!
AliRoxIt 3 years ago
Earl Shibe is alive and well in Australia
trboh 3 years ago