VFC Scar Gearbox Tutorial - Disassembly

[donutmaster64]

@wibb what items do i need to disassemble this?

[giansantiago]

hey man can you help me about putting back the fire selector? cant seem to put it together properly

[000terminator]

my safty still shoots on semi auto, im sure this is a problem with the selector switch, it would be great if you could tell me how to go about fixing it, thanks!

[TheMamaluigi2]

Ok i REALLY dont like internally messing with My guns: do i need to do anything to it to use a 7.4v lipo? Thanks

[TheMamaluigi2]

Hey do you know if the scar (completely stock) can take a m130 spring? Do I need to upgrade the motor or gears or something? also will it take a lipo with said m130 spring in stock? Thanks

[boredgunner]

@TheMamaluigi2 No because of the plastic bushings and I think the spring guide is also plastic. You'll want to upgrade these to Modify 7mm solid stainless steel bushings (bearings are less reliable) and a metal spring guide. With an M130 spring the aluminum piston head may break the plastic cylinder head over time, so you'll want to install a polycarb ported piston head as well.

[fanofCOH]

i dont get the point of the systema motors. way over priced..

[xhalation]

Do you recommend removing the cut off leaver for 7.4 LiPo, or only the 11.1? I want to keep semi mode on my stock VFC.

[haydensroomstudios]

I was wandering where you gpt the .9 mm hex i cant seem to find anything under 1.5 mm thanks

[AirsoftSpecialist1]

@haydensroomstudios Grainger.com

[r33skyline4life]

whats the song dude thanks for the video aswell

[TATAschaffenburg09]

how do u get the Selector Gears in the right possition by assembling the gun? that they aren't loosing there correct possition? I don't realy know how to do that... give me a tip pls!! with best wishes!

[hockeydemon]

What type of motor is that? Could I get a link to it, I heard the stock battery is shit for the VFC which is what I have and I'm planning on replacing it asap.

[MAELKEMANDEN]

Best song ever. and Crazy ROF you have there :O

[muninja]

how do you remove the cut off lever and where is it located?This will be the first time trying to open the gbox.I've already bypassed the safe(don't really care for the motor)

Have opened couple gboxes in the past though.Thanks.

PS.What type of bushing/bearings does it have(so that i can preorder them)

[Aquino87]

dude how do u take off the orange flash hider, cus its giving me a pretty ass kicking from taking it off. thanks

[wibb]

@Aquino87

My outer barrel and flash hider is non-standard, Its a part i got machined from solid 6062 T6 aluminium bar and milspec anodised.

[yourgoogleadvisor]

@Aquino87 have you tried coing clockwise instead of counter clockwise because that is how they work

[wibb]

Whatever you choose to put inside- don't expect it to last forever at these sorts of ROF. i normally do a 20K round service and inspection and a 40K round renewal of all internal parts.I use the cheap (but not nasty) chinese parts because i know they will be the first to fail and easiest (cheap) to replace. I would rather a $9 piston fail than a $80 gear set!

[ahadsz]

@wibb Just wondering would this set from evike be perfect for the parts that you mentioned internally arent so great? Have a look please and tell me if you think there worth it? Thanks

[ahadsz]

Just search: DB M4 Ball Bearing Spring Guide, 7mm Bearing and Piston Heat Set. Thanks! Appreciate all the help because youtube doesnt let you post htmls

[ahadsz]

@wibb sorry about the double post but

Just search: DB M4 Ball Bearing Spring Guide, 7mm Bearing and Piston Heat Set. Thanks! Appreciate all the help because youtube doesnt let you post htmls

[PaulusMG]

5:40 this step is a really good one.

if you didnt make it, the box will open with an "explosion" and after that you can search the gears in your room xD

[UGRYF]

Nice vid. Quite useful. What's the music?

[Skilledkilla28]

Thanks for the vid gave me alot of insite about what i want to do to my VFC...im getting a spring guide and a new spring get it up 2 400fps ...but mainly great vid thanks!

[RA3SCentauro]

had u change internal gears?

[wibb]

The gears are standard VFC gears

[soxfan308]

Awesome. Finally, a good video with an expensive gun. Always seems to be some 12 year old with a TM or Ares who doesn't know what he/she is doing, but you show exactly what is needed to be shown and in good detail. Great vid, I give it 5.

[IMRKJMSBITCH]

I have the VFC Scar and it is first rate. The first thing you need to do is get rid of the fuse in the stock and replace the crappy wiring with something a little more robust.

Gun is wicked accurate right out of the box.

I highly recommend it if you are looking for a Scar

also check out the WE Scar gas blowback, very cool and it shoots great

[DarkGhost209]

Would you suggest the VFC over the G&G, and the CA SCAR's?

Im looking to buy a SCAR but I dont know which one is better...

Also i heard that the VFC SCAR has some plastic internals stock. Can you confirm this?

[wibb]

the VFC i find has nicer quality bodywork compared to the CA and G&G, - correct version contols and better anodising finish on the upper reciever. also i prefer the look of the Gen3 scar furnature to the Gen2 CA and G&G scars.

Inside the stock vfc scar. you will find it runs on plastic bushes and a non-bearing spring guide- but the piston is aluminium and the gears are rock solid with a reinforced last tooth for the pison gear. if you plan on modifying the gearbox anyway- it doesnt matter :)

[DarkGhost209]

Alright, appreciate the info. thanks :)

[mchawks31]

I got the same scar. Nice as hell. Ive modified my gun to use a LiPo and running full auto only. I wanna put in the Pro Arms 3 round Burst though (already have it) Just trying to figure out how i can. Any suggestions?

[rmkeurekarider6969]

how many rounds a second cuz i think mines faster. i get around 26 with out a lipo to. instead of the systema motor try a g&p m120 hi speed there much faster and use differant gears the stock ones arnt as good as promy

[wibb]

My highest recorded is 34 rounds per second. Acoustic analysis confirmed.

[rmkeurekarider6969]

if i were u try the g&p m120 motor it makes it faster i have compared the blue systema magnum iny gun to the g&p and theres no comparison im getting 25 rounds a sec with systema gears stock cylender m100 spring promy cylender head stock taplet plate and airnozle and a promy hard piston and basicly u cant destroy anything in it

[iano09]

dove si mette l anti reversa latch..e anke la molla in che posizione si mette..risp please

[wibb]

sorry i dont speak italian.

[EagleAirsofters]

hey theanks wibb