i see, i run my prelude on ms1 extra 029y3, though different to a rotary, its such a great ecu huh!
tell me something, we sharethe ame sensor configuration, being dual vr sensor in our distributors, the primary being 24 tooth and the secondary being single tooth, i could not make mine run with the single tooth as a second trigger, i had to make a 2 tooth econd trigger for my ms1 to decode wasted spark - are you running ms2 or ms1, and if you run ms1, did you need to do the same for the 12a?
The crank angle sensor that come with the cars actually is a 24 primary, and 2 secondaries, so no modding was necessary. The only addition I had to do was build a second trigger circuit in the proto area.
its the horn. this is the warning buzzer, every generations of rx7 and the rx8 have one. As soons has you are in the redline, the buzzer warns you to shift. Its quite ingenious, helpful and better then a shift light !!
can someone help me out and tell me where to buy performance parts for a 1st gen rx-7 i would appreciate it
IRideBrakeless 6 months ago
@IRideBrakeless
ww.re-speed.com ;)
samhamm 6 months ago
@samhamm thanks man
IRideBrakeless 6 months ago
hört sich von innen an wie ein 2takter motorrad beim beschleunigen :DDDD
BoSAnDZeRo007 6 months ago
good sound too =D now thats what i call a real mazda rx7 =D its the best cars japan has ever made =)
lvatha 8 months ago
i love you...
superteddy94 8 months ago
fucking mount the camera next time jesus fucking christ
samlec04 10 months ago
Go to 1:00 to see acceleration
Papryk777 1 year ago
easy as then!
preludefan 2 years ago
nice man is so sweet to see a rotary run on megasquirt, its the first ive seen of a rotary running on it, are you running wasted spark a well?
preludefan 2 years ago
Its definatly not the first, the guy that writes the codes for the megasquirt own an Rx7 so there are plenty. Wasted spark is turned on yes.
I really should update this video as alot of the timing maps and fuel maps have changed and runs alot quicker
samhamm 2 years ago
i see, i run my prelude on ms1 extra 029y3, though different to a rotary, its such a great ecu huh!
tell me something, we sharethe ame sensor configuration, being dual vr sensor in our distributors, the primary being 24 tooth and the secondary being single tooth, i could not make mine run with the single tooth as a second trigger, i had to make a 2 tooth econd trigger for my ms1 to decode wasted spark - are you running ms2 or ms1, and if you run ms1, did you need to do the same for the 12a?
preludefan 2 years ago
The crank angle sensor that come with the cars actually is a 24 primary, and 2 secondaries, so no modding was necessary. The only addition I had to do was build a second trigger circuit in the proto area.
samhamm 2 years ago
I would like to buy one for my 82 if it was not so dam expensive, ouch. O r just get a weber
ssantiago914 2 years ago
hmm cat sounds so stock to me not very fast i have to say man my s5 would kill that
akademiks604bc 2 years ago
lol ... no thats actually the rev limiter bouncing.
samhamm 2 years ago
if it has a buzzer on the redline that so typical mazda- inovative and original!
preludefan 2 years ago
@preludefan they did that cuz the original rx7's without the loud exhaust were so quiet they had to put those in.
TheRotaryman 1 year ago
lol you kept accidently honkin didnt you?
DRIFTRACEBASS 2 years ago
its the horn. this is the warning buzzer, every generations of rx7 and the rx8 have one. As soons has you are in the redline, the buzzer warns you to shift. Its quite ingenious, helpful and better then a shift light !!
rx7outlaw 2 years ago
lol that would be awful if you were that terrible you kept honking. Do they give liences to blonde teenage girls still?
ChaseSpeer 2 years ago
yeh pretty sure rx7's beep at u if u hit limiter
0Frostitute0 2 years ago
is this 1st gen or 2nd gen?? what side draft intake are you using?
celisto001 3 years ago
This is a 1st gen with racing beat 2 piece side draft intake manifold.
samhamm 3 years ago
thank you!!!!
celisto001 3 years ago
Sounds awesome!
XR4turbo 3 years ago